Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-FIO-UV


1) Sprache auswählen:


Automotive Industry (Automobilindustrie) 
N° 559


Presence control of fluorescent coating
The presence of a fluorescent coating on rubber seal should be controlled.
Textile Industry (Textilindustrie) 
N° 516


Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
Paper Industry / Printing Industry (Papierindustrie / Druckindustrie) 
N° 493


Fluorescence detection on metal foils
The presence of fluorescence coating on a metal foil should be controlled.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 474


Detection of fluorescent oil on flat washers
The presence of oil on different flat washers should be controlled. It has to be taken into account, that the oil is fluorescent, if UV light is used.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 473


Detection of fluorescent lubricant on metal pins
Fluorescent lubricant should be detected on metal pins.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 456


Glue detection on the thread of a screw
The presence and amount of fluorescent (fluorescent under the influence of UV light) glue on the thread of a screw should be detected.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
Automotive Industry (Automobilindustrie) 
N° 424


Oil drop presence control on a steel surface
The presence of an oil drop on a steel surface should be controlled.
Packaging Industry (Verpackungsindustrie) 
N° 421


Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.
Paper Industry / Printing Industry (Papierindustrie / Druckindustrie) 
Pharmacy (Pharmazie) 
N° 417


Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 330


Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
Packaging Industry (Verpackungsindustrie) 
N° 317


Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
Chemical Industry (Chemische Industrie) 
N° 195


Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
Automotive Industry (Automobilindustrie) 
N° 152


Detection of fluorescent cured glue on a shaft
On a shaft fluorescent glue is used to seal the intersection between the shaft and a roll.
Pharmacy (Pharmazie) 
N° 116


Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
Environmental Technology (Umwelttechnik) 
N° 98


Oil containing waste water detection
On an oil press the amount of oil in the waste water must be controlled. Typical values are 500ppm of flux oil in the waste water and the goal is to reach the 100ppm. At this the fluorescent effect of the flux oil can be used.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung) 
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 88


Fluorescent glue control on an abrasive belt
During the production of abrasive belt material with a 10mm wide glue stripe the presence of the fluorescent glue must be observed. Defects greater than 2mm in length must be proper detected. The distance of the sensor head to the object should be approximately 20mm and the detecting range around 2mm x 10mm.
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 47


Color detection of fluorescent marks on wood plates
On wooden plates defects will be marked with a fluorescent marker. The fluorescent mark has normally a width of about 15mm and it can happen, that two of this marks lie 20 mm away of each other, but must be detected as two separate marks. Furthermore the fluorescent marks should be detected at a distance of 200 mm to the object and even a mark with a width of 5mm should be detected.


AKTUELLES

Messeteilnahmen:

 •   Automation World AIMEX 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP