Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-80-UV


1) Sprache auswählen:


Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 539


Presence control of liquid fluorescent glue in a hole
The presence of fluorescent liquid glue in a hole should be controlled.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 496


检查金属栅格上是否有油
应检查金属栅格上是否有油。

Oil presence control on metal grids
The presence of oil should be detected on metal grids.
Textile Industry (Textilindustrie) 
N° 391


识别一幅纺织面料上的荧光线
在纺织行业,荧光线用来作为两幅纺织面料之间的连接点的标记。现在应通过光学技术检测出这根线并加以区分。

Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
Packaging Industry (Verpackungsindustrie) 
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 308


检查透明塑料袋中是否有医用胶布
应监视是否存在在紫外线下会发荧光的医用胶布。

Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.
Synthetic Industry (Kunststoffindustrie) 
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 271


识别塑料膜上的粘胶层
应识别出塑料膜上存在的粘胶层。最好应对粘胶层的整个宽度进行检查。粘胶涂层在紫外线下(365nm … 385nm) 会发出荧光,且在受到激发时发出可见的蓝光。反之,塑料表面则对紫外线表现中性。

Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
Packaging Industry (Verpackungsindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 233


金属包装上荧光标签检测
在此应用中,SI用于检测图示金色及银色金属箔纸包装物的正反面是否贴有标签。由于该标签纸内含荧光材质,因此用UV型的颜色传感器即可检测。

Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.
Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik) 
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 193


检测金属板上的荧光标记
传感器用于检测金属板顶部的荧光标记。

Detection of a fluorescent mark on a metal sheet matrix
A fluorescent mark on the top side of a metal sheet matrix should be detected.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 173


洗碗机焊缝检测
该应用中,传感器用于检测洗碗机的焊缝。装配有喷嘴的机器人会将荧光液体喷洒到洗碗机的内箱体。如果焊缝上有漏点,荧光色液体就会溢出并被荧光颜色传感器检测到。

Leak detection of welding lines on dish washers
Leaks should be detected on welding lines of dish washers. At this, a robot equipped with a spray nozzle sprays a fluorescent liquid into the inner chamber of a dish washer. If leaks are present in the welding line, the fluorescent liquid flows through these leaks and can be detected with a fluorescent color detector.
Paper Industry / Printing Industry (Papierindustrie / Druckindustrie) 
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 60


荧光标记的颜色检测
通常的荧光传感器只是检测荧光光线的强度而非颜色,并且在检测距离超过80mm时,他们的检测效果就非常不理想了,同时也非常受外界光线的影响。而德国SI的荧光颜色传感器则有效的解决了以上问题,可以对荧光标记的颜色进行检测,不受检测距离影响,也不受外界光线影响。

Color differentiation of fluorescent liquids and marks
Available fluorescent sensors so far detect only the intensity of a fluorescent object but not the color. Furthermore these sensors have a problem to detect very weak fluorescent objects or fluorescent objects at a distance more than 80mm and additionally they are sensitive against ambient light. For the purpose of fluorescent color mark detection a color sensor for fluorescent colors should be used.


AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP