Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-FIO-ANA


1) Sprache auswählen:


Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 538


Control de la banda de rodadura de ruedas dentadas
Se debe controlar la banda de rodadura de ruedas dentadas respecto a defectos de superficie.

Control of the contact surface of gear wheels
The contact surface of gear wheels should be controlled.
Chemical Industry (Chemische Industrie) 
N° 459


Distinción de la parte posterior de la parte frontal de un anillo de plástico
Se deben controlar anillos de plástico, que se transportan en una cinta, respecto a la posición (parte frontal arriba - abajo).

Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
Chemical Industry (Chemische Industrie) 
N° 458


Detección del punto de separación en una banda de vellón-plástico
Se debe detectar el punto de separación en una banda de vellón-plástico. Se debe observar que tanto el punto de separación y como el el vellón-plástico son de color blanco, por lo tanto, no hay ninguna diferencia de color.

Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 340


Control del color de ranuras en tableros de MDF
Dentro de las ranuras se debe supervisar el gradiente homogéneo, en caso de defectos se puede ver el fondo MDF.

Color control of grooves on MDF plates
Grooves on MDF plates should be color controlled. In case of failure the MDF background color can be seen.
Synthetic Industry (Kunststoffindustrie) 
N° 337


Distinción entre la parte delantera y trasera de una película de plástico
La cara brillante de una película de plástico semi-transparente debe distinguirse de la parte posterior mate.

Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
Synthetic Industry (Kunststoffindustrie) 
N° 320


Distinción de láminas plásticas ligeramente difusas
Se debe controlar la ligera turbidez de láminas plásticas transparentes.

Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 319


Distinción entre cuerpos de jeringas con y sin recubrimiento
Se deben distinguir cuerpos de jeringas de vidrio o plástico recubiertos interiormente de los no recubiertos.

Differentiation of coated and uncoated syringes
Coated syringes should be distinguished from uncoated syringes.


AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP