Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-30-DIL


1) Sprache auswählen:


Automotive Industry (Automobilindustrie) 
N° 351


Color control of seat belt plugs
Seat belt plugs should be color differentiated.
Automotive Industry (Automobilindustrie) 
N° 349


Color control of seat belts
The fabric of the seat belts should be color controlled.
Automotive Industry (Automobilindustrie) 
N° 313


Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 312


Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
Synthetic Industry (Kunststoffindustrie) 
Automotive Industry (Automobilindustrie) 
N° 156


Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
Packaging Industry (Verpackungsindustrie) 
N° 64


Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 45


Az acélhuzalokon található színes jelzések felismerése
A terület ahol két acélhuzal végeit összehegesztik kék vagy piros színnel lesznek jelölve. A további feldolgozás alatt ezeket a színes jelöléseket kell felismerni.

Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 44


Az eloxált alumínium drót színeinek megkülönböztetése
A feldolgozás során az eloxált alumínium drótok színét(kék, arany, piros és zöld) ellenőrizni kell, elkerülve a nem megfelelő drót használatát.

Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 43


A különböző galvanizált acélhuzalok színellenőrzése
Az acélhuzalon végzett felületi kezelés minőségének megtartása miatt állandó színellenőrzésre van szükség a galvanizációs eljárás után.

Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
Automotive Industry (Automobilindustrie) 
N° 37


Az autókon használt ajtókilincs színeinek megkülönböztetése
Az autóajtók összeszerelése során többek között a kilincsek színét ellenőrizni kell, elkerülve az eltérő színű alkatrész felszerelését.

Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
Automotive Industry (Automobilindustrie) 
Textile Industry (Textilindustrie) 
N° 35


Az autóiparban használt szőnyegek megkülönböztetése (belső berendezés)
A szőnyegek összeszerelése során azok színét ellenőrizni kell. Gyakorlatban a szürke, bézs és fekete árnyalatok vannak túlsúlyban.

Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
Automotive Industry (Automobilindustrie) 
N° 30


Autóipari lakkozás-irányítás
Az autóipari lakkozott alkatrészeket ellenőrizni kell, elkerülve a hibás szállítást az autógyártókhoz. Az alkatrészek, mint a lökhárítók, visszapillantó tükör burkolatok, ultrahangos érzékelők, tanksapkák, ajtókilincsek, ajtók és első fedelek némely esetben közel hasonló színnel lakkozottak.

Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 20


A zárófej színének ellenőrzése
A különböző színű zárófejek színeit ellenőrizni kell.

Closure head color control
Different plastic closure heads should be color controlled.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
Automotive Industry (Automobilindustrie) 
N° 13


A dugattyúrúd felületének ellenőrzése: acél, vagy króm
Ellenőrizni kell, hogy a dugattyúrúd króm bevonatú, vagy nem.

Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 7


A bevont és bevonatlan fémlemezek megkülönböztetése a színérzékelővel
A fedőlapok és konzervdobozok gyártása során a fémlemezek első, hátsó oldalát kell ellenőrizni. Meg kell különböztetni a bevont és a bevonatlan oldalakat.

Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie) 
N° 6


Ragasztási felület észlelése
A nyomtatott áramköri lap alapanya általában egy “végtelen” szalagra kerül, és a szalagon levő ragasztási felületek kerülnek felderítésre.

Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.


AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP