Products

Overview

A-LAS Series - Laser Analog Light Barriers Parallel laser light with homogeneous light distribution in round or rectangular cross-section is used for measuring, positioning, and detection of objects starting from a size of 0.01 mm. Visible laser beam (laser class 2) Apertures available from 0.2 mm to 30 mm High reproducibility starting from 0.5 µm High analog band width (300 kHz) Optics and optics cover made of glass Various electronic control units available (partly parameterisable under Windows® via RS232) C-LAS Series - Compact Laser Sensors Because of its outstanding compact design, the C-LAS Series is especially suitable for applications in the field of robotics. Due to the high type of protection (IP67) and the scratch-proof glass cover of the optical unit, the sensors can be operated in rough industrial environments. Apart from the laser ranging sensor types (analog and digital), a transmitted-light (up to 100 m) and a reflected-light version (up to 30 m), as well as a contrast sensor (up to 200 mm) are also available. Ideal for positioning tasks. D-LAS Series - Laser Digital Light Barriers The laser digital light barriers of D-LAS Series work with visible parallel laser light. The use of round or rectangular apertures ensures a homogeneous light distribution in the laser beam. Smallest objects are detected even in case of a large transmitter/receiver distance. Dynamic correction of the switching threshold compensates the effect of dirt accumulation (with D-LAS1, D-LAS2, D-LAS34, and D-LAS-34/90). These light barriers are ideal for positioning tasks. F-LAS Series - Laser Fork Light Barriers Parallel laser light with homogeneous light distribution in round or rectangular cross-section detects smallest objects. The sensitivity is set by means of a potentiometer. These laser light barriers are ideal for positioning tasks. FIA Series - Fork Light Barriers with Integrated Amplifiers In the fork light barriers of FIA Series the complete electronic evaluation unit is integrated in the sensor housing. The visible light beam considerably facilitates adjustment of the light barrier. The switching state is indicated by means of a red/green LED. Visible light beam (660 nm) Min. detectable object size 0.05 mm Switching frequency up to 800 kHz Various types of housings are available Sensitivity adjustable by means of a 5-step switch Optics cover made of glass Sturdy metal housing FLB Series - Frame Light Barriers The sensors of FLB Series detect parts starting from a size of 0.2 mm with a switching frequency of 1 kHz. An additional analog output (0...+10V) offers application possibilities in the field of measuring technology. With the electronic control unit FLB-CON2 an operator-friendly parameterisation on a PC under Windows® is ensured. L-LAS Serie - Laser Line Sensors Line sensors are applied where precise positioning is required or where the dimensions of an object have to be determined with high accuracy (e.g. diameter of a wire). The L-LAS sensors of the transmitted-light series (L-LAS-TB) offer various operating widths with a resolution of up to 1024 pixels. An analog output (voltage output and current output) informs about position and size of the object. Furthermore, a digital output is available that informs about quality and position of the object. Telecentric beam path Various models available (in fork shape or split shape) Various operating widths (8mm, 25mm, 55mm, 75mm) Resolution 1024 pixels (correlative 8µm, 25µm, 55µm, 75µm) Insensitive to outside light due to interference filter Polarisation filter, and mechanical covers External TEACH-function - Sturdy metal housing Can be parameterised under Windows® RS232 interface (USB adaptor available) Laser class 2 (visible laser light, 670 nm) LBC Series - Laser Blade Counters The LBC Series impeller vane counters are primarily used for detecting and counting the vanes or blades of turbo- chargers and fans. The high scanning frequency and the standardized data evaluation of the laser sensor allow its application with objects of different color and speeds of up to 30000 rpm. The visible laser spot and the automatic laser power correction feature facilitate sensor alignment to the respective objects. an anlaog signal (0...+10V) and a digital signal (0V/+24V) are available as outputs. LCC Series - Laser Copy Counters LCC Series laser copy counters primarily are designed for detecting and counting magazines or single sheets in imbricated arrangement. In the optimal operating range they detect sheet edges of a thickness of typ. 50 µm. The sensors of series LCC are characterised by their reliable function, their ease of operation, and their sturdy mechanical construction. Further characterising features of this sensor series are their high scanning frequency and their ability to adjust themselves to differently bright and dark, or slow and fast moving parts. LUMI Series - Luminescence Sensors Luminescence sensors are applied where adhesives, sealing compounds, special liquids, or other materials are combined with fluorescent substances. When illuminated with UV-light, these fluorescent additives will light up and emit light in the visible spectrum (e.g. red, orange, yellow, green, blue). In the LUMI Series sensors, modulated UV light is employed to suppress outside light sensitivity. The special optical arrangement of optical emitter and receiver (radial or linear emitter) allows operating distances of up to 100 mm. The sensors are equipped with an RS232 interface, the Windows® software is included in the delivery. LWC Serie - Laser Wire Counter LWL Series - Optical Fibers Optical fibers offer solutions for difficult tasks in optoelectronis. They can be used universally and allow flexible applications. Highest quality Selection from different fiber types Thermal stability Great variety of available standard sensor heads Special designs Various attachment optics are available (reflex optics, prism optics) M-LAS Series - Miniature Laser Light Barriers With an external diameter starting from 3 mm or thread M4, these laser light barrier types should be among the smallest all over the world. Because of its compact design, the M-LAS Series find application where little space is available on the one hand, and a small light spot (parallel or focused) is required on the other hand. Various control units are available: RS232 version, parameterizable under Windows® Analog version with 4...20 mA output Digital version with automatically corrected switching threshold Ideal for detecting extremely small objects, and for positioning. RLS Series - Reflective Light Sensors Insensitive to outside light due to clocked white light Working range typ. 10 ... 40 mm Parameterisable under Windows®, RS232 interface Analog output (0 ... +10V) Switching output (npn-/pnp, 100 mA, short-circuit-proof) Operating indication by means of a green LED Switching state indication by means of a yellow LED Scratch-resistant glass covers of optics Sturdy aluminum housing RLS Series - Gloss Detection Sensors The sensors of RLS-GD series are used for online measurement of gloss degree. In the production of plastic sheets (design sheets, wall coverings, floor coverings, table coatings, foam sheets, and coated carrier materials for the furniture industry, automobile industry, fashion industry, or construction industry) and ceramic parts (ceramic tiles and plates for wall and floor) 100% quality inspection of the optically visible surface has become an ever more frequent requirement.' For this purpose the RLS-GD sensors feature non-contacting detection of the gloss degree. The simultaneous measurement of the object from two different directions (direct reflection and diffuse reflection) allows intensity-independent evaluation. The sensor can be taught to a certain surface, and up to 31 tolerance windows can be applied around the taught value. Measurement output is performed digitally by way of five outputs. R-LAS Series - Laser Reflex Sensors The laser reflex light barriers of the R-LAS-LR Series operate according to the principle of auto-collimation. An integrated polarisation filter ensures protection against spurious triggering caused by reflecting objects. The laser power adjusts itself to the respective reflector and reflector distance. Parameterisable under Windows® with Sensor Instruments software LR-SCOPE. The laser reflex light sensors of the R-LAS-LT Series operate according to the principle of triangulation with background suppression. The measuring object is measured independent of the surface quality, color, and background. Standardised evaluation and automatic power correction ensure a very dynamic range. Parameterisable under Windows® with Sensor Instruments software RT-SCOPE or LT-Scope. SI-COLO Series - Color Sensors The color sensors of SI-COLO Series operate according to the 3-color-range principle, with a white-light LED as a light source. Except of the sensors of SI-COLO1 series, the color sensors can be parameterized under Windows® through the serial RS232 interface. SI-COLO1 (3 primary colors RED, GREEN, BLUE) SI-COLO2 (15 colors, 8-bit A/D conversion) SI-COLO3 (15 colors, 12-bit A/D conversion) SI-COLO84 (100 colors, 12-bit A/D conversion) SI-JET - Laser Spray Jet Control System By means of three laser light barriers integrated in a transmitter and receiver unit the SI-JET laser spray jet control system checks the density, symmetry, and cone angle of the spray jet. Choked or incorrectly set nozzles can thus be detected in time. A comprehensive software (SPRAYER-Scope) allows parameterization of the system via Windows®. By using the supplied adjustment facility the laser transmitter unit can be easily and comfortably aligned with the receiver unit. SPECTRO-3 Series - color sensors With the SPECTRO-3 series there now is a family of color sensors that has been specifically designed for "true-color" detection ("human color reception") and high switching frequency. The sensors can be operated both in AC and in DC mode, with integrated or external light source. With the included SPECTRO3-Scope software illumination can also be turned off with a simple mouse-click, which then also allows the color and brightness inspection of self-luminous objects such as LEDs, automobile tail lights, halogen lamps, or fluorescent lamps. Up to 31 colors can be provided through the 5 digital outputs, the maximum switching frequency is 30 kHz. Apart from a super-bright white-light source, a high-performance UV light source also is available, which allows the color and brightness differentiation of fluorescent colors without any problems. Different frontends make it possible to implement operating distances of almost 0 mm through to 500 mm, with detection areas of Ø 0.5 mm to approx. Ø 100 mm. The use of an optical fibre version allows applications in Ex areas. In the SPECTRO-3 series great importance was attached to a compact design and to the largest possible extent to a uniform appearance of the various types (M34 design), which facilitates sensor installation TLB Series - Trigger Light Barriers The light barriers of TLB Series are mainly used in the field of metal stamping. They are available in IR version as well as in VIS version, in split shape as well as in fork shape (with or without compressed air supply). Characteristical for all light barriers of TLB Series is the external electronics: Pulsating light or constant light amplifier with digital output or analog output (voltage output and current output). The light barriers are primarily mounted at the stamping die bottom part, and are available with a so-called tool plug. The connection from the tool plug to the interface box is established by means of a connecting cable. Pulsating light and constant light amplifiers are usually connected to the interface box. Accessoires Accessories like distributor box, connector, bushings, clamp disk, initiators, Teachboxes etc.