Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

L-LAS-GTM Series

Laser distance line sensors for glass thickness measurement


General technical data ....

Type Light sourceDetector lengthReference distanceMeasuring rangeMax. scan frequencyLxWxH (mm) Data
sheet
CAD
data
Appl.
L-LAS-GTM-256/16 Line laser, 670nm, <1mW (Cl. 2)typ. 16mm10...80mm, depends on the sensor adjustment to the object (position of angle)depends on the sensor adjustment to the object (position of angle)typ. 200Hz80x65(81.5) x22
Appl.


GENERAL TECHNICAL DATA:
Software Windows® PC software: L-LAS-GTM-Scope
Voltage supply +24VDC (± 10%), reversed-polarity protected, overload protected
Current consumption <200mA
Max. switching current 100mA, short-circuit proof
Light source Semi-conductor laser, 670 nm, <1mW opt. power, AC-operation,
Laser class 2 acc. to DIN EN 60825-1:2015-07 (IEC 60825-1:2014)
Line detector CCD line detector with 256 pixels
Measuring range depends on the alignment of the sensor to the object (position of angle)
Laser line geometry Length of detector typ. 16 mm
Optical filter Interference filter, red light filter
Analog output Voltage 0...+10V
Digital outputs OUT0, OUT1:
pnp bright-switching/npn dark-switching or
pnp dark-switching/npn bright-switching
Output polarity adjustable under Windows® via PC
Digital input IN0: External trigger
Input voltage +Ub/0V, with protective circuit
Sensitivity adsjutable with tolerance potentiometer or under Windows® via PC
Laser power correction adjustable under Windows® via PC
Temperature stability 0,01% of measuring range/°C
Teach button for norm value teachting
LED display LED red (+): Measuring value > upper tolerance threshold
LED green: Voltage indication/Visualization teach process
LED red (-): Measuring value < lower tolerance threshold
Scan frequency typ. 200 Hz (without averaging)
Interface RS232, parameterisable under Windows®
Housing dimensions depends on sensor type
Housing material Aluminum, anodized in blue
Type of connector - to PLC: 8-pole fem. connector Binder 712
- to PC: 4-pole fem. connector Binder 707
Connecting cable - to PLC: cab-las8/SPS
- to PC: cab-las4/PC, cab-4/USB or cab-4/ETH
Operating temp. range 0°C ... +50°C
Storage temp. range -20°C ... +85°C
Enclosure rating Electronics: IP64, optics: IP67
EMC test acc. to DIN EN 60947-5-2





TOP