Fiber optics BICONE (1P+1BP)/2P
Y-fiber optics with two adapters (2x 2-pin adapters: (1P+1BP)/2P)
General technical data ....
| Type | Cross section of fibers | Cable sheath made of | Available lengths | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|
| R-S-A2.0-(2.5)-1200-Y-67°-(1P+1BP)/2P | 2.5mm | Silicone metal | 1200mm |
|
|
|
||
| R-S-A3.0-(3.0)-1200-Y-67°-(1P+1BP)/2P | 3.0mm | Silicone metal | 1200mm |
|
|
|
||
| R-S-A3.0-(d2/d4)-1200-Y-22°-(1P+1BP)/2P | Ø2mm, Ø4mm | Silicone metal | 1200mm |
|
|
|||
| R-S-A3.0-(d2/d4)-1200-Y-67°-(1P+1BP)/2P | Ø2mm, Ø4mm | Silicone metal | 1200mm |
|
|
|
||
| R-S-A3.0-(d2/d4)-1200-Y-22°-UV-(1P+1BP)/2P | Ø2mm, Ø4mm | Silicone metal | 1200mm |
|
|
|||
| R-S-A3.0-(2xd3/2)-1200-Y-22°-(1P+1BP)/2P | 2x Ø3mm/2 | Silicone metal | 1200mm |
|
|
|||
| R-S-A3.0-(2xd3/2)-1200-Y-67°-(1P+1BP)/2P | 2x Ø3mm/2 | Silicone metal | 1200mm |
|
|
|
||
| R-S-A3.0-(2xd3/2)-1200-Y-22°-UV-(1P+1BP)/2P | 2x Ø3mm/2 | Silicone metal | 2x Ø3mm/2 |
|
|
|||
| R-S-A3.0-2x(3x1)-1200-Y-22°-(1P+1BP)/2P | 2x (3mmx1mm) | Silicone metal | 1200mm |
|
|
|||
| R-S-A3.0-2x(3x1)-1200-Y-67°-(1P+1BP)/2P | 2x (3mmx1mm) | Silicone metal | 1200mm |
|
|
|||
| R-S-A3.0-2x(3x1)-1200-Y-22°-UV-(1P+1BP)/2P | 2x (3mmx1mm) | Silicone metal | 1200mm |
|
|
|||
| R-S-Q4-(28x0.2)-1200-Y-67°-(1P+1BP)/2P | 28mmx0.2mm | Silicone metal | 1200mm |
|
|
|||
| R-S-Q6-(48x0.15)-1200-Y-67°-(1P+1BP)/2P | 48mmx0.15mm | Silicone metal | 1200mm |
|
|
|||
| R-S-R2.1-(6x1)-1200-Y-67°-(1P+1BP)/2P | 6mmx1mm | Silicone metal | 1200mm |
|
|
|
BICONE fiber optics primarily are used for distance measurements. The small dimensions of the respective fiber optics heads allow distance measurements at places where space is limited. Furthermore, the absence of electronics at the place of use also allows applications in Ex areas or for example at ambient temperatures of up to 400°C.
In combination with SPECTRO-1-FIO and SPECTRO-2-FIO sensors scan frequencies of up to 200kHz can be reached.
GENERAL TECHNICAL DATA:
GENERAL TECHNICAL DATA:
|
Single fiber diameter
|
20, 30, 50, 70 µm standard fibers (depending on the design)
|
|
Fiber opening angle
|
Standard fiber:
67° (NA 0.56) Special fibers: 22° (NA 0.21) 22° UV (80/100 µm) |
|
Fiber material
|
Optical glass (e.g. quartz glass for UV)
|
|
Electric strength
|
50kV/m with PVC sheathing
|
|
Sensor head: Temperature resistance of fiber bonding
|
Standard: -20°C ... +80°C
T400: -40°C ... +400°C |
|
Fiber sheathing:
|
Silicone-metal sheath ("S"):
Metal spiral tube with glass filament braiding and silicone rubber sheath. Properties: Highly flexible, highly resistant to kinking, tensile stress and torsion, thermally stable up to 180°C, liquid-tight Stainless steel sheath ("E"): Flexible stainless steel spiral tube with special bonding. Properties: Flexible, protection against mechanical stress, thermally stable up to 400°C. Metal sheath ("M"): Flexible brass spiral tube, chromium-plated. Properties: Flexible, protection against mechanical stress, thermally stable up to 180°C. PVC special sheath ("P"): Highly flexible plastic tube. Properties: Highly flexible, small sheath diameters, thermally stable up to 80°C. |
|
Permissible temperature range for sheathing with corresponding fiber bonding
|
Silicone-metal sheath ("S"):
-40°C ... +180°C Stainless steel sheath ("E"): -40°C ... +400°C Metal sheath ("M"): -40°C ... +180°C PVC special sheath ("P"): -20°C ... +80°C |
|
Fiber transmission
|
For wavelengths from 190 nm to 2500 nm various types can be used
|
|
Cable lengths
|
Standard lengths: 600mm, 1200mm
Length tolerance typ. ±4% Special lengths up to 30m available on request (not for all sensor head types) |
|
Tolerances
|
typ. ±0.1mm
|
|
Sensor head end sleeves
|
Stainless steel or aluminium (anodised in black)
|
|
Bending radius
|
Sheath type "S":
The bending radius is equal to four times the outside diameter of the sheath. Sheath type "E" and "M": The bending radius is equal to three times the outside diameter of the sheath. Sheath type "P": The bending radius is equal to twice the outside diameter of the sheath. |
|
Angled sensor head versions
|
Angled sensor head versions must be expected to show a reduced range compared to axially emitting versions.
|
|
Special versions
|
Fiber optics with increased vibration protection (type "-VS")
For applications involving higher mechanical stress such as impacts, acceleration, and movement, fiber optics can be produced with increased vibration protection. A special treatment in these fiber optics reduces friction between the fibers and compensates impacts. Fiber optics with special bonding for high temperatures (type "-T400") Standard bonding is suitable for temperatures of up to 80°C. With special bonding materials temperatures of up to 400°C can be reached. For these higher temperature ranges stainless steel sheathing of type E must be used. Customer-specific versions: Special versions with different complex sensor heads can be produced according to customer requests. |
TOP