Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-30-POL


1) Sprache auswählen:


Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 632


Color differentiation of anodized aluminum tubes
Anodized aluminum tubes should be color differentiated.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 631


Color differentiation of anodized aluminum profiles
Anodized aluminum profiles should be color differentiated.
Automotive Industry (Automobilindustrie) 
N° 618


Color differentiation of threads through shiny transparent plastic film
Components with different colored threads should be differentiated.
Automotive Industry (Automobilindustrie) 
N° 608


Color differentiation of automotive loudspeaker housings
The color of automotive loudspeaker housings should be controlled.
Packaging Industry (Verpackungsindustrie) 
N° 574


Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.
Glass Industry (Glasindustrie) 
N° 567


Color differentiation of flat glasses
Flat glasses should be color differentiated.
Textile Industry (Textilindustrie) 
N° 494


Farvekontrol gennem transparent folie af indpakket T-Shirts
farven på T-Shirts, som er pakkede i en tranparent folie skal aftastes.


Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
Automotive Industry (Automobilindustrie) 
N° 479


Farveaftastning af lyse sikkerhedsseleafdækninger
Lyse sikkerhedsseleafdækniger skal aftastes og skelnes.


Color differentiation of bright seat belt plastic housings
Bright seat belt plastic housings should be color differentiated.
Automotive Industry (Automobilindustrie) 
N° 478


Farveaftastning af beige sikkerhedsseleafdækninger
Beige og lysbeige sikkerhedsseleafdækninger skal aftastes og kunne skelnes.


Color differentiation of beige seat belt plastic housings
Beige colored seat belt plastic housings should be differentiated.
Automotive Industry (Automobilindustrie) 
N° 477


Farveaftastning af mørke sikkerhedsseleafdækninger
Sikkerhedsseleafdækninger skal aftastes og skelnes med hensyn til farve Det drejer sig om meget mørke plastdele med forskellig farveskær, nogle rødlige andre blålige.


Color differentiation of dark seat belt plastic housings
Dark seat belt housings should be differentiated.
Automotive Industry (Automobilindustrie) 
N° 476


Fargenkending af plastdele fra automobilbranchen
Interiørdele af plast skal aftastes og skelnes på farve.


Color differentiation of plastic interior components for the automotive industry
Plastic components used for the automotive interior field should be color differentiated.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 475


Skelne mellem enkelt og dobbeltlagslakering indvendigt i aluminiumsrør
Der skal skelnes mellem enkelt og dobbeltlagslakering indvendigt i aluminiumsrør.


Differentiation of single and double inside coated aluminum tubes
Single inside coated aluminum tubes should be differentiated from double inside coated aluminum tubes.
Chemical Industry (Chemische Industrie) 
N° 457


Orienteringskontrol af et silikonelag på et transparent kunststofbånd
Orienteringen samt posistionen af et silikonelag, skal aftastes på en transparent kunststoffilm. Herved kontrolleres om det er for eller bagside som vender opad.


Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 447


Farveaftastning af plastkapper på injektionssprøjter
Plastkapper som anvendes til glasinjektionssprøjter, skal kontrolleres. Specielt skal bemærkes at plastkapperne er let transparente og overfladen desuden har stor glansværdi.


Color differentiation of plastic caps for syringes
Plastic caps used for syringes should be color controlled. It has to be taken into account, that the plastic caps are semitransparent and the surface is very glossy.
Lifestyle (Lifestyle) 
N° 442


Farvekontrol på neglelak
Farven på neglelak skal kontrolleres. Ved opgaven skal bemærkes at neglelakken allerede er påfyldt en beholder og at aftastningen skal forgå gennem dette glas.


Color control of nail polishes
The color of nail varnishes should be controlled. It has to be taken into account that the nail lacquers should be checked through transparent glass bottles.
Automotive Industry (Automobilindustrie) 
Textile Industry (Textilindustrie) 
N° 429


Farveaftastning på voksbelagte tråde
Voksbelagte tråde skal skelnes på farven. Herved skal bemærkes at trådene på grund af vokslaget ehar høj glansgrad.


Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 428


Skelne mellem dele som er zinkbelagte og ikke zinkbelagte
Zinkbelagte afdrejede stålemner skal skelnes fra emner som ikke er zinkbelagte.


Differentiation of zinc plated steel parts and raw steel parts
Zinc plated steel turned parts should be differentiated from raw steel turned parts.
Synthetic Industry (Kunststoffindustrie) 
N° 361


Farvegenkending på plastlåg
Såkaldte plastlåg skal aftastes for farveforskelle. I opgaven skal der sorteres på gode og fejl emner.

Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
Automotive Industry (Automobilindustrie) 
N° 348


Farvegenkendelse på beskyttelsestyller til sikkerhedsseler
Gummityller til beskyttelse på sikkerhedsseler skal kontrolleres for farve.

Color control of seat belt rubbers
Seat belt rubbers should be color differentiated.
Synthetic Industry (Kunststoffindustrie) 
Automotive Industry (Automobilindustrie) 
N° 347


Kontrol af farve på sikkerhedsselehus
Farven på huset til en sikkerhedssele skal kontrolleres.

Color control of seat belt sockets
Seat belt sockets should be color controlled.
Synthetic Industry (Kunststoffindustrie) 
N° 323


Farvegenkendelse på sort henholdsvis grå naturfilt til interiørområdet
Sort og grå naturfilt skal kunne aftastes sikkert.

Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
Glass Industry (Glasindustrie) 
N° 290


Farveforskel på bunden af flasker i klart glas
Klare glasflasker, som er indfarvede i bunden, skal detekteres og sorteres efter farve. Herunder findes fire forskellige farver: klar, gul, rød og violet.

Color differentiation of bottom colored clear glass bottles
Bottom colored clear glass bottles should be differentiated. At this, four different colored bottles can be possible: clear, yellow, red and violet.
Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik) 
N° 285


Check af tilstedeværelsen af fleece omviklet ledere i et kabel
Tilstedeværelsen af fleece omkring lederne i et kabel skal kontrolleres. Farven på lederne kann variere, hvorimod fleecen altid er hvid.

Presence control of a fleece on a cable harness
The presence of a fleece on a cable bundle should be controlled. At this, the color of the harness can differ from batch to batch, whereas the color of the fleece remains white.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 279


Farvekontrol på plastlåg V
4 forskellige plastlåg skal kontrolleres (lys gul, mørk gul, lys grøn og mørk grøn).

Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 278


Farvekontrol på plastlåg IV
3 forskelligt farvede plastlåg skal genkendes (lys blå, blå og mørkeblå).

Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 277


Farvekontrol af plastlåg III
3 forskelligt farvede plastlåg (sort, lys gylden og mørk gylden) skal kontrolleres.

Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 276


Farvegenkendelse af plastlåg II
3 forskelligt farvede plastlåg (hvid, lys rød og mørk rød) skal kontrolleres.

Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 275


Farvegenkendelse på plastlåg
3 forskelligt farvede plastlåg (lys orange, mørk orange og grå) skal kontrolleres.

Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Provisions Industry (Lebensmittelindustrie) 
N° 273


Farvedrift kontrolleres under produktion
Driften på farven af plastflasker skal aftastes under håndteringsprocessen. Til dette brug stoppes en samling af flasker et par hundrede millisekunder, dette er tilstrækkelig tid til lave kontrollen. Der der produceres forskellige farver glas (fx. klar, blå, grøn, brun) skal sensoren være i stand til hurtigt at tilpasse sig omgivelserne.

Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
Synthetic Industry (Kunststoffindustrie) 
N° 267


Farvegenkendelse af kunststofbægre
Røde og sorte plastbægre med høj glans skal skelnes. Ved denne opgave er det speciele , at afstanden mellem sensor og bægre, kan variere nogle millimeter.

Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
Automotive Industry (Automobilindustrie) 
N° 263


Fargenkendelse på sort og brun midterkonsol
En sort kunststofkonsol skal skelnes fra en mørkebrun midterkonsol. Herunder skal man være opmærksom på at overfladerne har meget stor glansværdi.

Color differentiation of a black and brown center console
A black and dark brown plastic center console should be differentiated. It has to be into account, that the surface where the color should be controlled is very shiny.
Packaging Industry (Verpackungsindustrie) 
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 252


Skilleliniedetektion på et hvidt kunststofbånd
Skillelinien på et hvidt kunststofbånd skal aftastes med en sensor som anvendes som diffus.

Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.
Automotive Industry (Automobilindustrie) 
N° 235


Farvegenkendelse på 2 forskellige lakerede kunststofdele
To kunststofdele, hvis farver ligger meget tæt på hinanden, skal skelnes.

Color differentiation of spray lacquered plastic parts
Two different colored plastic components should be distinguished.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 165


Kvalitetskontrol på bruseslanger
Overfladen på bruseslanger skal kontrolleres. Fejlemner med svagt grå farve, grå farve (pletter) samt gule toner, men ligeledes metaloverlap samt rødt bånd skal aftastes.

Quality inspection of shower hoses
The surface of shower hoses should be controlled. Failures like slight gray tint, gray tint (bloom), yellow tint surfaces (yellowness) but also a metallic overlap and a red ribbon should be detected.
Packaging Industry (Verpackungsindustrie) 
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 147


Kontrol af tilstedeværelse af tråd på tampon
Trådens placering bag på tamponen skal kontrolleres. Rigtig position betyder at den turkisfarvede tråd skal dække stort set hele bagsiden. Placeringen skal kontrolleres gennem en transparent plastfilm.

Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
Packaging Industry (Verpackungsindustrie) 
N° 140


Kontrol af coating på metalplader
Tilstedeværelsen af coating på en metalplade skal kontrolleres.

Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.
Automotive Industry (Automobilindustrie) 
N° 133


Farvekontrol på forskellige komponenter til en gearboks
Efter samling af gearboksen, skal de forskellige dele kontrolleres med hensyn til farve.

Color control of different components of a gear box
After the assembling of a gear box, the different components must be controlled in relation to the color.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 96


Skelne mellem forside og bagside på låg
Under produktionen af dispensere for vådservietter skal orienteringen af låget kontrolleres.

Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
Packaging Industry (Verpackungsindustrie) 
N° 95


Kontrol af banderole på cigaretpakke
På cigaretpakker skal banderolens tilstedeværelse kontrolleres. På checkpositionen er pakken allerede pakket og bandarolen er indpakket I transperant blank film.

Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.
Automotive Industry (Automobilindustrie) 
N° 80


Farveadskillelse på interiørkomponenter
I automobilindustrien skal der skelnes mellem forskellige interiørdele (træ, plast eller metaldele). Visse træ og plastkomponenter har høj glans, hvor andre komponenter er mere diffuse.

Color differentiation of interior equipment
In the automotive industry different interior parts (wooden as well as plastic and metal elements) must be differentiated. Some wooden and plastic elements are very glossy whereas other components are diffuse.
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 66


Farvekontrol I møbelindustrien
Under fremstillingen af døre, skal farven kontrolleres og overvåges. Farven bliver påført af dyser, som er monteret på robotarmen. Efter denne proces, men inden før tørreprocessen, skal farven kontrolleres.

Color monitoring in the furniture industry
During the manufacturing process of doors the color must be controlled and monitored. At this the color will be sprayed with spray nozzles, which are mounted on a robot, onto the doors. Just after this process but before the drying process the color should be controlled.
Chemical Industry (Chemische Industrie) 
N° 55


Farvekontrol af emulsion
Farven på emulsionen som skal kontrolleres er normalt hvid, men kan I vise tilfælde kan denne farve ændre sig over I det røde eller grønne område. Denne afvigelse skal genkendes.

Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
Environmental Technology (Umwelttechnik) 
N° 50


Farvekontrol af tilstædeværelsen af flusmiddel
Under montageprocessen af solcellemoduler på en loddemaskine, skal lederbåndet kontrolleres for tilstedeværelsen af flusmiddel.

Color control of the presence or absence of the flux
During the assembling process of photovoltaic cells on a stringer machine the conduction band must be controlled in respect of the presence or absence of the soldering flux.


AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP