Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-30-DIL


1) Sprache auswählen:


Automotive Industry (Automobilindustrie) 
N° 351


Distinction en couleur des différentes fermetures pour ceinture automobile
Les fermetures doivent être identifiées.

Color control of seat belt plugs
Seat belt plugs should be color differentiated.
Automotive Industry (Automobilindustrie) 
N° 349


Distinction des couleurs de ceinture de sécurité
Les différentes couleurs de textile doivent être identifiées.

Color control of seat belts
The fabric of the seat belts should be color controlled.
Automotive Industry (Automobilindustrie) 
N° 313


Distinction de différentes pièces plastiques pour automobiles
Les couleurs des pièces plastiques doivent être identifiées.

Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 312


Détection de repères colorés sur différents tubes en plastiques pour la cosmétique
Différentes marques colorées doivent être détectées sur des divers tubes.

Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
Synthetic Industry (Kunststoffindustrie) 
Automotive Industry (Automobilindustrie) 
N° 156


Distinction des couleurs de composants en plastique noirs et marrons foncé dans l’habitacle
Les deux pièces en plastique (noire et marron foncé) doivent être détectées. Il faut ici tenir compte du fait que la face avant et la face arrière doivent être contrôlées du fait de la situation de montage.

Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
Packaging Industry (Verpackungsindustrie) 
N° 64


Distinction entre des tubes traités et non traités
La détection à l’intérieur d’un tube du traitement se fait par la couleur dorée, et le non traitement est détectable par la teinte argentée.

Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 45


Détection de marques colorées sur fils métalliques
Pour la soudure de deux fils métalliques, lors d‘une fin de bobine, l’identification est faite par le marquage coloré et donc une détection fiable de ces zones est necessaire.

Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 44


Distinction en couleur de fils d’aluminium anodisés
Durant le procédé d’anodisation de fils d’aluminium, il est necessaire qu’ils soient identifiés.

Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 43


Contrôle de la galvanisation de fils métalliques
Afin de maintenir une qualité de galvanisation optimale, un contôle de la couleur est necessaire.

Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
Automotive Industry (Automobilindustrie) 
N° 37


Reconnaissance de la couleur de poignée de porte automobiles
Pendant l’assemblage des portes automobiles, les poignées doivent identifiées par leurs couleurs.

Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
Automotive Industry (Automobilindustrie) 
Textile Industry (Textilindustrie) 
N° 35


Distinction de tapis pour l’industrie automobile
Pendant l’assemblage de tapis pour les intérieurs de véhicules automobiles, il est necessaire de les distinguer par leur différentes nuances de beige gris ou noir.

Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
Automotive Industry (Automobilindustrie) 
N° 30


Distinction de pièces peintes pour automobile
Pour l’industrie automobile, le contrôle de pièces peintes et vernis s’impose afin d’éviter les erreurs d’assemblage. Pare-chocs, retroviseurs, clapet d’essence, poignet de portes sont ainsi identifiés par leur couleur.

Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 20


Contrôle de bouchons
La qualité en couleur des bouchons plastiques doit être verifiée.

Closure head color control
Different plastic closure heads should be color controlled.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
Automotive Industry (Automobilindustrie) 
N° 13


Contrôle de l’état de surface de bielles : aspect acier ou chromé
Les bielles doivent être distinguées suivant leur version.

Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 7


Distinction de surfaces métalliques traitées avec un capteur couleur
Dans la production de boites de conserves, le sens de présentation des surfaces intérieures et extérieures doit être controllé.

Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie) 
N° 6


Détection de surfaces encollées
La matière de PCB est normallement enroulée comme une ceinture sans fin qui contient une zone encollée à détecter.

Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.


AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP