Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Praktische Beispiele aus dem industriellen Einsatz
SPECTRO-3-50-FCL


1) Sprache auswählen:


Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 620


Color control of stainless steel tubes
Blue painted stainless steel tubes should be differentiated from uncolored tubes.
Automotive Industry (Automobilindustrie) 
N° 419


Differentiation Alcantara (Ultrasuede) and fabric interior equipment
Alcantara and fabric interior equipment should be differentiated.
Environmental Technology (Umwelttechnik) 
N° 413


Position monitoring of metal wires on a transparent plastic layer
The back side / front side position of metal wires on a transparent plastic film should be controlled.
Automotive Industry (Automobilindustrie) 
N° 408


Differentiation of black and dark gray leather imitation
Dark gray and black leather imitation should be distinguished.
Automotive Industry (Automobilindustrie) 
N° 334


Color differentiation of fabrics and leather imitations
Fabrics as well as leather imitations should be differentiated in the automotive interior field.
Automotive Industry (Automobilindustrie) 
N° 298


Color differentiation of interior components
Six different interior components should be color differentiated. The sensor distance should be around 50mm and the detecting range of the color sensor at this distance should be approximately 20mm in diameter.
Synthetic Industry (Kunststoffindustrie) 
Automotive Industry (Automobilindustrie) 
N° 292


Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
Automotive Industry (Automobilindustrie) 
N° 269


Color differentiation of two plastic parts
Two different colored plastic components used in the interior field should be differentiated.
Automotive Industry (Automobilindustrie) 
N° 262


Color differentiation between a brown and a black cap in a console
A brown plastic cap should be differentiated from a black plastic cap in a console.
Provisions Industry (Lebensmittelindustrie) 
N° 259


Color control of cookies
During the production of cookies the color should be controlled.
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 184


Double layer control of fleece material
It should be differentiated between one and two layers of a fleece material.
Automotive Industry (Automobilindustrie) 
N° 175


Color differentiation of two different structured plastic moldings
Two different structured plastic components should be distinguished. At this, the background color is exactly the same.
Automotive Industry (Automobilindustrie) 
N° 168


Color differentiation of garnish moldings
Different colored garnish moldings should be distinguished. It has to be taken into account, that the components are very shiny.
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik) 
N° 162


Presence control of a label on a nursing pad
The presence of a label on a nursing pad should be controlled.
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung) 
N° 149


Differentiation between water moistened and dry floor tiles
After the moisturization the floor tiles should be checked, whether the amount of moisture is in the right range or out of range (too much or too little moisture content). The tiles looks brighter if the degree of moisture is too small and the tiles looks darker as normal if too much water is on the tiles. In the normal case the tiles looks gray in color.
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 146


Detection of knots and bark in wooden stakes
Wooden stakes should be produced free of knots and bark.
Automotive Industry (Automobilindustrie) 
N° 124


Detection of a metal sheet on a stack
Metal plates are removed from a stack with a robot. After the last metal sheet is removed a sensor should inform the robot to avoid that the base plate will be sucked up from the robot too. The base plate can consist of MDF (medium density fiberboard), wood, rubber or even a metal which is different from the metal sheet.
Automotive Industry (Automobilindustrie) 
N° 99


Az ajtó belső alkatrészek felületi színének megkülönböztetése
Az eltérő színű belső részeket meg kell különböztetni. Az egyes alkatrészek közti színkülönbségek viszonylag kicsik, de a különböző szerkezetű részek fényességi tényezője jól látható.

Color gloss differentiation of door interior components
Different colored interior parts must be differentiated. The color differences between the respective components are relatively small but there is a good difference in the gloss factor due to the different structure of the part.
Glass Industry (Glasindustrie) 
Automotive Industry (Automobilindustrie) 
N° 62


Color control of tinted glass plates
During the assembling of cars the color of the glasses from the side door must be checked. It is only possible to control from one side and even an additional reflector cannot be used.
Glass Industry (Glasindustrie) 
N° 61


Color differentiation of tinted and colored glass plates
During the subsequent processing of glass plates the different tinted and colored glasses must be controlled and discerned.
Automotive Industry (Automobilindustrie) 
N° 53


Color-gloss differentiation of leather and leather imitations in the automotive interior field
In the automotive interior field the different materials looks sometimes very similar. For a proper differentiation of the different products color-gloss detection should be used.
Automotive Industry (Automobilindustrie) 
N° 38


Az autóiparban használt bőr és műbőr színárnyalatainak megkülönböztetése
Az autóipari belső alkatrészek összeállításához bőr és műbőr áll rendelkezésre. Elkerülve a nem megfelelő részek beépítését, fényárnyalat-érzékelő szenzor használatával végezzünk az ellenőrzést.

Color gloss differentiation of leather and leather imitations in the automotive industry
In the automotive interior field components made of leather as well as of leather imitations are available. To avoid, that the wrong parts will be mounted a quality check with a color gloss sensor must be done.
Automotive Industry (Automobilindustrie) 
N° 36


A műbőr és szövetek színének megkülönböztetése az autók belső részében
Az autóajtókon, üléseken és fejtámlákon használt különböző műbőröket és szöveteket ellenőrizni kell, elkerülve a hibákat az összeszerelés során.

Color differentiation of leather imitations and textiles in the automotive interior field
Different leather imitations and textiles which are used especially for car doors, car seats and headliners must be controlled to avoid failures during the assembling.
Automotive Industry (Automobilindustrie) 
N° 34


Bőr és műbőr színeinek megkülönböztetése
Az autóiparban bőr és műbőr kerül felhasználásra a belső berendezésekhez.

Color differentiation of leather and leather imitation (interior equipment)
Leather and leather imitations are used for the interior equipment in the automotive industry.
Automotive Industry (Automobilindustrie) 
Textile Industry (Textilindustrie) 
N° 32


A bevont és bevonatlan felületek megkülönböztetése a légzsákok szövetén
A légzsákok gyártása során a légzsák bevont oldalát kell felismerni. Nagyon kis különbség van a légzsák szövetének bevont és bevonatlan oldalának színében és fényességében.

Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie) 
N° 5


Furnér ellenőrzése ajtók
1.1 Apróbb égésfoltok és borítás-hibák detektálása ajtógyártás során:
Az MDF lapra menet közben ragasztott borítást a ragasztót felmelegítő légpisztoly – amennyiben a folyamat bármilyen okból megszakad/megáll – finoman megperzselheti vagy megégetheti. Továbbá a felszakadt/hiányzó borítást egy színérzékelő segítségével kell érzékelni.
1.2 A fénylő és matt borítás megkülönböztetése:
A feladat, hogy megkülönböztessük a fénylő illetve matt fehér színű borítást.

Veneer control during the door production
1. Detection of slightly burned veneer zones and veneer tear-off during the door production:
The veneer will be glued onto the mdf plate during the movement, however, if the process will be interrupted due to any reason, it can happen, that the hot air gun, which will be used normally to warm up the glue, scorches or burns the veneer surface slightly. Furthermore the color sensor should detect a veneer tear-off.
2. Differentiation between white glossy veneer and white matt veneer:
The task is to distinguish between white glossy and white matt veneer.
Automotive Industry (Automobilindustrie) 
Textile Industry (Textilindustrie) 
N° 1


Minőségellenőrzés az autóiparban használt légzsákok gyártása során
1. A bevont/bevonat nélküli légzsákok felszíni ellenőrzése:
A légzsák anyagának egyik oldala bevont, míg a másik oldala bevonat nélküli. A feladat hogy ellenőrizzük a bevonat meglétét.
2. A légzsák anyagában található műanyag fólia betét meglétének ellenőrzése:
A műanyag fólia betét meglétét a légzsák anyagából történt kivágásnál kell ellenőrizni.

Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.



AKTUELLES

Messeteilnahmen:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ-Innovationstag Recycling
 •   SKZ-Netzwerktag
 •   SKZ-Technologietag
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

mehr...


Fachartikel:

Rezyklate direkt beim Spritzgießen und der Extrusion prüfen
NIR-Verfahren zur Inline-Kontrolle von Recycling-kunststoffen
Kunststoffe 2/2024

 

mehr ...


Pressemitteilungen:

Inline-Farbkalibrierung auf Kunststoffrezyklate
(Inline-Farbmesssysteme)

 
Testbericht zur Inline-Farbmessung an Rezyklaten
(Inline-Farbmesssystem)

mehr ...


Whitepaper:

Sensorsysteme zur Rezyklat-Kontrolle in der Kunststoffindustrie fürs Labor und Inline
Kontrolle der Kunststoffart von Rezyklaten und Neuware mit Hilfe der NIR-Technologie

mehr ...


Applikationen:

Detektion von Dellen und Beulen auf Metall-Stanzbändern
(N° 801)
Unterscheidung von Leder-, Textil- und Kunststoff- Interieurkomponenten
(N° 802)
Farbmessung von Kunststoffdeckeln
(N° 803)

mehr...


WAS IST ...
... Oberflächenspannung?
... Ölverdunstung?
... Ölschichtdickenmessung?

mehr...


Software-Neuheiten:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

mehr...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP