N° 558
|
Şeffaf etiketlerdeki yapışkan yerlerdeki boşlukların algılanması Şeffaf etiketlerde bir yapışkan yerin boşluğu algılanacaktır.
Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
|
|
N° 363
|
Metal bir çubuğun boy kontrolü Metal çubuğun boyu kontrol edilebilir. Burada, ölçüm sırasında metal çubuğun ilerleme hızı yaklaşık 2m/s olmalıdır.
Length control of a metal rod
The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement.
|
|
N° 332
|
Alüminyum profilin süper dikey kesitlerinin saptanması Alüminyum profilin süper dikey kesitleri saptanabilir.
Detection of super elevations of aluminum profile
Super elevations of aluminum profile should be detected.
|
|
N° 284
|
Ampul içerisindeki filaman tutucuların konumunun kontrolü Şeffaf ampülde olduğu gibi kırımızı ampül içerisindeki filaman tutucuların konumları kontrol edilebilir.
Position control of filament holders in bulbs
The position of the filament holders in clear as well as red glass bulbs should be controlled.
|
|
N° 268
|
Yüksek açısal hızın yön kontrollü ölçülmesi Çok hızlı dönen şaftın açı konumu ölçülebilir, ayrıca dönüş yönü kontrol edilebilir.
High speed angle measurement with direction control
The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled
|
|
N° 261
|
SMD LED’ lerin fazla dolum kontrolü SMD LED içerisindeki geçirgen döküm bileşen seviyesi fazla dolumdan dolayı kontrol edilebilir.
Overfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling.
|
|
N° 187
|
Optik plastik film üzerinde optik geçirgen plastik etiketin konumunun saptanması Optik geçirgen plastik film üzerinde optik geçirgen plastik etiketin konumu saptanabilir. Burada, filmin hızı birkaç m/s civarında olmalıdır.
Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
|
|
N° 121
|
Bir geçirgen plastik kapak üzerindeki düz dişlerinin varlığının kontrolü Bir geçirgen plastik kapak üzerindeki düz dişlerin varlığının kontrolü gerçekleştirilebilir. Düzgün olmayan kapak üzerinde, düz tırtık kısmen mevcut olmaz.
Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
|
|
N° 111
|
Işın sistemi içerisinden lazer ile damla kontrolü Damlaların sayısı ve hacmi kontrol edilebilir.
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
|
|
N° 109
|
Metal bir halka üzerindeki kaynak çizgisinin saptanması Amaç, metal bir halka üzerindeki kaynak çizgisinin saptanmasıdır. Ölçüm sırasında metal halka dönme hareketi sergiler.
Detection of a welding line on a metal ring
The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around.
|
|
N° 108
|
Tek filamanların bağ ve hata kontrolü Filamanlar ve dişler üzerinde bağ ve hatalar saptanabilir. Burada, farklı çapa sahip filamanlar ve dişlerr kullanmak mümkündür ve besleme hızı birkaç m/s’ dir.
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
|
|
N° 106
|
Elektrik bileşenlerinin pim yükseklik kontrolü Üretim sırasında elektrik bileşenlerin pim yükseklik kontrolü gerçekleştirilebilir.
Pin height control of electrical components
The height of the pins of an electrical component should be controlled during the production.
|
|
N° 104
|
Ağaç işi parçalarının sıralı çap kontrolü Çubuk hareket ederken, ağaç işi parçaların üretimi sırasında çapları kontrol edilebilir.
Inline diameter control of wooden staff
During the production of wooden staff the diameter must be controlled while the rod is moved.
|
|
N° 49
|
Bir Elektrikli Diş Fırçasının Şaftının Eksantrik Kontrolü Frekans kadar bir elektrikli diş fırçasının eksantrik genliği de kontrol edilmelidir.
Control of the eccentricity of the shaft of an electrical tooth brush
The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled.
|
|