R-LAS-LR-O Series
Laser Reflex Light Barriers (Object Serves as a Reflector)
General technical data ....
| Type | Light source | Min. detect. object | Working range | Beam geometry | Switch. fre- quency | Inputs/ outputs | RS232 inter- face | LxWxH (mm) | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| R-LAS-LR-OP | Laser, 670nm, <1mW (CL. 2) | 0.1mm | Working range: typ. 500mm (dep. on object) | Laser beam focused to 200mm, spot size in focus: typ. Ø 0.2mm | 1kHz | 1x ANA OUT, 1x DIG OUT (Qinv) | no | 68x24x31 |
|
||||
| R-LAS-LR-OP-CYL | Laser, 670nm, <1mW (CL. 2) | 0.5mm | 40mm ... 500mm | Laser beam focused to 75mm with cylindrical optics, spot size: focus: 3mmx0.3mm | 5kHz | 1x ANA OUT, 1x DIG OUT (Qinv) | no | 70x24x44 |
|
||||
| R-LAS-LR-OP-CYL-STST (V2A) | Laser, 670nm, <1mW (CL. 2) | 0.5mm | 40mm ... 500mm | Laser beam focused to 75mm with cylindrical optics, spot size: focus: 3mmx0.3mm | 5kHz | 1x ANA OUT, 1x DIG OUT (Qinv) | no | 70x24x44 |
|
|
|||
| R-LAS-LR-OBC | Laser, 670nm, <1mW (CL. 2) | 50µm | typ. 70mm ± 10mm | Spot size at distance 70mm: typ. Ø 0.1mm | 100Hz | 1x ANA OUT, 1x DIG OUT (Qinv or Q) | yes | 69.5x40x20 |
|
GENERAL TECHNICAL DATA:
| Software | ►with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OBC: Windows® PC software: LR-Scope ►with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA: Windows® PC software: LR-Scope V2.3 ►with R-LAS-LR-O-FIO-TE-HAMP: Windows® PC software: LR-2x-TEACH-EXTERN-Scope |
| Voltage supply | +24VDC (± 10%), reserved polarity protected, overload protected |
| Current consumption | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL: <110mA with R-LAS-LR-OBC, R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: <100mA with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP: <150mA |
| Max. switching current | 100mA, short-circuit proof |
| Light source | Semi-conductor laser, 670 nm, <1mW opt. power, AC-operation, Laser class 2 acc. to DIN EN 60825-1:2015-07 (IEC 60825-1:2014) |
| Reference distance | depends on sensor type |
| Min. detectable object | depends on sensor type |
| Working range | depends on sensor type |
| Beam geometry | depends on sensor type |
| Optical filter | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OBC, R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: interference filter and red light filter |
| Ambient light | up to 5000 Lux |
| Operation mode | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OBC, R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: alternating light (100 kHz) with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP: direct light |
| Inputs/outputs | depends on sensor type |
| Switching frequency | depends on sensor type (and on parameter setting) |
| Scan frequency | depends on sensor type |
| Band width analog signal | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP: typ. 1kHz (-3dB) with R-LAS-LR-OBC, R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: typ. 5kHz |
| Pulse lengthening | depends on sensor type |
| Bright-/dark switching | depends on sensor type |
| Switching hysteresis | depends on sensor type |
| Laser power correction | depends on sensor type |
| Sensitivity (switching threshold) | depends on sensor type |
| Tolerance band setting | depends on sensor type |
| Threshold correction | depends on sensor type |
| Switching state indicator | with R-LAS-LR-O-FIO-TE-HAMP: by means of 2 yellow LED integrated in the sensor housing (for channel 1 and 2) with R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: by means of a two-color LED (yellow/green) integrated in the sensor housing |
| Dynamic range indicator | with R-LAS-LR-O-FIO-TE-HAMP: by means of a green LED integrated in the sensor housing |
| Potentiometer | with R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: 1x 3-revolutions potentiometer for adjustment of gain, 1x 3-revolutions potentiometer for adjustment of switching threshold |
| Averaging | depends on sensor type |
| Housing dimensions | depends on sensor type |
| Housing material | Aluminum, anodized in blue with R-LAS-LR-OP-CYL-STST: stainless steel, V2A |
| Type of connector | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OBC: - to PLC: 4-pole M8-connector - to PC: 5-pole fem. connector Binder 712 with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP - to PLC: 4-pole M8-connector - to PC: 5-pole fem. connector Binder 712 - to fiber optics: fiber optics adaptor with R-LAS-LR-OP: - to PLC: 4-pole M8-connector with R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: - to PLC: 4-pole M12-connector |
| Connecting cables | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OBC: - to PLC: cab-M8/4 - to PC: cab-las5/PC, cab-5/USB or cab-5/ETH with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP - to PLC: cab-M8/4 - to PC: cab-las5/PC, cab-5/USB or cab-5/ETH with R-LAS-LR-OP: - to PLC: cab-M8/4 with R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: - to PLC: cab-M12/4 |
| Operating temp. range | -20°C ... +55°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | with R-LAS-LR-O, R-LAS-LR-O-INF, R-LAS-LR-O-CYL, R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST: IP67 with R-LAS-LR-O-FIO, -FIO-RA, -FIO-SRA, -FIO-TE-HAMP IP64 |
| EMC test acc. to | DIN EN 60947-5-2 |
| Interface | RS232 (not available with R-LAS-LR-OP, R-LAS-LR-OP-CYL, R-LAS-LR-OP-CYL-STST) |
| External teaching | with R-LAS-LR-O-FIO-TE-HAMP: 2 Teach buttons for adjustment of 2 tolerance windows |
TOP