L-LAS-GTM Series
Laser distance line sensors for glass thickness measurementGeneral technical data ....
GENERAL TECHNICAL DATA:
Software | Windows® PC software: L-LAS-GTM-Scope |
Voltage supply | +24VDC (± 10%), reversed-polarity protected, overload protected |
Current consumption | <200mA |
Max. switching current | 100mA, short-circuit proof |
Light source | Semi-conductor laser, 670 nm, <1mW opt. power, AC-operation, Laser class 2 acc. to DIN EN 60825-1:2015-07 (IEC 60825-1:2014) |
Line detector | CCD line detector with 256 pixels |
Measuring range | depends on the alignment of the sensor to the object (position of angle) |
Laser line geometry | Length of detector typ. 16 mm |
Optical filter | Interference filter, red light filter |
Analog output | Voltage 0...+10V |
Digital outputs | OUT0, OUT1: pnp bright-switching/npn dark-switching or pnp dark-switching/npn bright-switching Output polarity adjustable under Windows® via PC |
Digital input | IN0: External trigger Input voltage +Ub/0V, with protective circuit |
Sensitivity | adsjutable with tolerance potentiometer or under Windows® via PC |
Laser power correction | adjustable under Windows® via PC |
Temperature stability | 0,01% of measuring range/°C |
Teach button | for norm value teachting |
LED display | LED red (+): Measuring value > upper tolerance threshold LED green: Voltage indication/Visualization teach process LED red (-): Measuring value < lower tolerance threshold |
Scan frequency | typ. 200 Hz (without averaging) |
Interface | RS232, parameterisable under Windows® |
Housing dimensions | depends on sensor type |
Housing material | Aluminum, anodized in blue |
Type of connector | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 |
Connecting cable | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
Operating temp. range | 0°C ... +50°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | Electronics: IP64, optics: IP67 |
EMC test acc. to | DIN EN 60947-5-2 |