SI-JET Series
Spray jet control systemsGeneral technical data ....
GENERAL TECHNICAL DATA:
Software | Windows® PC software: SI-JET-Scope |
Electronic control units (variants) |
SI-JET-FIO-RL, SI-JET2-CON2: for fiber optic frontends with 3 red light beams SI-JET2-CON3: for 3-fold fiber optic frontend with each 1 red light beam (flexible to position) SI-JET3-CON5: for optical frontends (fork shape or split version) with 3 red light beams SI-JET3-CON8: for up to 3 analog laser light barriers in M12 or M18 shape |
Voltage supply | +24VDC (± 10%), reserved polarity protected, overload protected |
Current consumption | <200mA |
Max. switching current | 100mA, short-circuit proof |
Light source (transmitter) | super bright LED (red, 650nm), modulated 100kHz |
External teaching | by means of integrated teach button or via input IN0 |
Switching state indicator | by means of 5 yellow LED |
Interface | RS232, parameterisable under Windows® |
Averaging | max. 32768 values, adjustable under Windows® |
Outputs | 5x digital OUT0 ... OUT4 (0V/+UB), short-circuit proof, pnp/npn-able (bright/dark switching can be adjusted) |
Ext. teach input (IN0) | +UB signal (min. pulse length 250ms, max. pulse length 1000ms) |
Pulse lengthening | 0 ... 100ms, adjustable under Windows® |
Spray values memory capacity |
non-volatile EEPROM with parameter sets for max. 31 spray values |
Working distance | depends on sensor type |
Red light beam path or fiber optics bundle or laser beam |
SI-JET2-D20: telecentric, 3x Ø 3 mm, distance between the beam bundles: 5 mm SI-JET2-FK-200/100-H: telecentric, 3x Ø 3 mm, distance between the beam bundles: 5 mm (arranged horizontally) SI-JET2-FK-200/100-V: telecentric, 3x Ø 3 mm, distance between the beam bundles: 5 mm (arranged vertically) R3-M-A2.0-(2.5)-5000-67°-3X + R3-M-A1.1-(1.5)-5000-67°-3X: 3x fiber optics bundles Ø 2,5mm (transmitter) or Ø 1,5mm (receiver) SI-JET3-d12: telecentric, 3x Ø 5mm (flexible positioning), with blast-air top-part SI-JET3-FK-200/100-H: telecentric, 3x Ø 3 mm, distance between the beam bundles: 5 mm (arranged horizontally) A-LAS-M12-...-C, A-LAS-M18-...-C: Laser, 670nm, <1mW optical power, modulated 30kHz, class 2 laser product (various aperture sizes are available) |
Optical filter | depends on sensor type |
Beam divergency | depends on sensor type |
Pressed air connector | either integrated in the sensor frontend or separate available as accessory |
Housing dimensions | depends on sensor type |
Housing material | depends on sensor type |
Type of connector | - to PLC: 8-pole fem. connector Binder 712 - to PC: 5-pole fem. connector Binder 712 - to sensor frontend: 7-pole fem. connector Binder 712 or fiber optics adaptor |
Connecting cable | - to PLC: cab-las8/SPS - to PC: cab-las5/PC, cab-5/USB or cab-5/ETH |
Operating temp. range | -10°C ... +50°C with A-LAS-M12-...-C and A-LAS-M18-...-C: 0°C ... +60°C |
Storage temp range | -20°C ... +85°C |
Enclosure rating | Electronics: IP64 Sensor frontend: IP67 |
EMC test acc. to | DIN EN 60947-5-2 |