|
:
|
APP N° 803
Param.:
|
INI:
|
|
Pomiar koloru pokrywek z tworzywa sztucznego Powinien być mierzony kolor pokrywek z tworzywa sztucznego.
Plastic cap color measurement
The color of plastic caps should be measured.
|
|
|
:
|
APP N° 802
|
Rozróżnianie komponentów wykonanych ze skóry, materiałów tekstylnych i tworzyw sztucznych do wnętrza pojazdu Powinny być rozróżniane części wykonane do wnętrza pojazdu ze skóry, materiałów tekstylnych i tworzyw sztucznych.
Differentiation of leather, fabric and synthetic interior components
Leather, fabric and plastic interior parts should be differentiated.
|
|
|
:
|
APP N° 801
Param.:
|
|
Wykrywanie wgnieceń i okrągłych wgłębień w wytłaczanych taśmach metalowych Powinny być ustalone wgniecenia i okrągłe wgłębienia na wytłaczanych taśmach metalowych.
Detection of dents and bumps on metal punching strips
Dents and bumps on metal punching strips should be detected.
|
|
|
:
|
APP N° 800
Param.:
|
INI:
|
|
Wykrywanie odkształceń taśm wytłaczanych Powinny zostać rozpoznane odkształcenia w wytłaczanych taśmach.
Detection of deformations on stamping stripes
Deformations on stamping stripes should be detected.
|
|
|
:
|
APP N° 799
Param.:
|
|
Kontrola obecności masy zalewowej na elementach z tworzyw sztucznych Powinna być sprawdzana obecność masy zalewowej na elemencie wykonanym z plastyku.
Presence control of a potting compound on plastic components
The presence of a sealing compound on plastic components should be controlled.
|
|
|
:
|
APP N° 798
Param.:
|
INI:
|
|
Rozróżnianie komponentów ze skóry i z plastiku do zamontowania we wnętrzu pojazdu Powinny być rozróżniane komponenty do wnętrza pojazdu wykonane ze skóry i tworzywa sztucznego.
Differentiation of leather and plastic interior components
Leather and synthetic interior parts should be differentiated.
|
|
|
:
|
APP N° 797
|
Kontrola koloru półfabrykatów z tworzyw sztucznych wykonanych z materiału poddanego recyclingowi Półfabrykaty wykonane z materiału pozyskanego w procesie recyklingu powinny być kontrolowane z uwagi na barwę.
Color control of preforms made of recyclates
Preforms made of recycled material should be color controlled.
|
|
|
:
|
APP N° 796
Param.:
|
INI:
|
|
Rozróżnianie barw zderzaków gumowych z większej odległości Zderzaki gumowe powinny być rozróżniane z uwagi na kolor z dużej odległości.
Color differentiation of rubber buffers from a distance
The color of rubber buffers should be controlled from a distance.
|
|
APP N° 795
|
Pomiar grubości przezroczystej folii stretch Powinna być ustalana grubość optycznie przezroczystej folii stretch.
Translucent stretch film thickness measurement
The thickness of a translucent stretch film should be measured.
|
|
|
:
|
APP N° 794
|
Kontrola istnienia bardzo cienkich filmów olejowych Należy sprawdzać obecność bardzo cienkiej warstwy oleju (< 1µm).
Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
|
|
|
:
|
APP N° 793
|
Kontrola barwy półfabrykatów butelek z tworzyw sztucznych Powinien być sprawdzany kolor półfabrykatów butelek wykonanych z plastyku.
Color control of preforms
The color of preforms should be controlled.
|
|
|
:
|
APP N° 792
|
Rozróżnianie strony przedniej i strony tylnej folii aluminiowych pokrytych powłoką Pokryta powłoką strona przednia folii aluminiowych powinna różnić się od strony odwrotnej.
Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.
|
|
|
:
|
APP N° 791
INI:
|
|
Kontrola obecności butelek w opakowaniach do leków Powinna być kontrolowana obecność buteleczek szklanych w opakowaniach do leków.
Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.
|
|
|
:
|
APP N° 790
INI:
|
|
Pomiar połysku wykładzin podłogowych z tworzyw sztucznych Powinien być ustalany stopień połysku wykładzin podłogowych z tworzyw sztucznych.
Gloss measurement of synthetic floorings
The gloss of plastic floors should be measured.
|
|
|
:
|
APP N° 789
|
Pomiar grubości folii z tworzywa sztucznego Powinna być ustalana grubość folii stretch z tworzywa sztucznego.
Plastic film thickness measurement
The thickness of plastic stretch film should be measured.
|
|
|
:
|
APP N° 788
Param.:
|
|
Rozpoznanie smug na powierzchniach z tworzywa sztucznego Powinno być sprawdzane, czy na powierzchniach z tworzyw sztucznych nie występują smugi i pręgi.
Streak detection on a plastic surface
A plastic surface should be controlled regarding freedom from streaks and striae.
|
|
|
:
|
APP N° 787
|
Kontrola obrotów silników elektrycznych Powinna być kontrolowana prędkość obrotowa silników elektrycznych.
Frequency control of electric motors
The frequency of electric motors should be controlled.
|
|
|
:
|
APP N° 786
|
Kontrola rozpylonego strumienia cieczy Powinien być kontrolowany pulsujący, dozowany z małym natężeniem strumień rozpylanej cieczy.
Spray jet control
A pulsed, weakly dosed spray jet should be controlled.
|
|
|
:
|
APP N° 785
|
Kontrola szerokości blach metalowych Powinna być mierzona szerokość szybko przemieszczających się blach metalowych.
Width control of metal sheets
The width of very fast moved metal sheets should be measured.
|
|
|
:
|
APP N° 784
|
Rozpoznanie i liczenie drutu w trakcie procesu nawijania Powinna być kontrolowana obecność jak i liczba drutów podczas procesu nawijania.
Wire detection and counting during the braiding process
Wires should be detected and counted during the braiding process.
|
|
|
:
|
APP N° 783
|
Wykrywanie krawędzi w perforowanych złożonych workach papierowych i w tekturze falistej Powinny zostać zarejestrowane oraz policzone krawędzie w przygotowanych do transportu workach papierowych oraz papie falistej.
Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.
|
|
|
:
|
APP N° 782
Param.:
|
|
Wykrywanie miejsca szwu w tkaninach tekstylnych Powinny być rozpoznane miejsce szwu w technicznych tkaninach tekstylnych.
Seam detection on fabrics
The seam on technical fabrics should be detected.
|
|
|
:
|
APP N° 781
|
Kontrola oczek w taśmach metalowych Powinna być kontrolowane oczka w taśmach metalowych.
Mesh control on metal braided hoses
Meshes on metal braided hoses should be controlled.
|
|
|
:
|
APP N° 780
Param.:
|
INI:
|
|
Kontrola splotu węży wzmocnionych tkaniną Powinien być kontrolowany splot węży wzmocnionych tkaniną.
Meshes control on fabric hoses
The meshes of a braided hose should be controlled.
|
|
|
:
|
APP N° 779
Param.:
|
INI:
|
|
Kontrola połysku farby na lakierowanych blach metalowych Lakierowane blachy metalowe powinny być kontrolowane z uwagi na kolor i połysk.
Color-gloss control of lacquered metal sheets
Lacquered metal sheets should be controlled with regard to the color and gloss.
|
|
|
:
|
APP N° 778
|
Rozróżnianie komponentów ze skóry i z tworzyw sztucznych montowanych we wnętrzu pojazdu Elementy wykonane ze skóry i plastyku powinny być odróżniane od siebie we wnętrzu pojazdu.
Differentiation of leather and synthetic interior components
Leather and plastics interior parts should be differentiated.
|
|
|
:
|
APP N° 777
|
Rozpoznawanie defektów w tarczach do cięcia Powinny zostać wykrywane defekty w tarczach do cięcia.
Defect recognition on saw blade discs
Defects on saw blade discs should be detected.
|
|
|
:
|
APP N° 776
|
Rozpoznawanie brzegów na ręcznikach Powinien być rozpoznawane brzegi ręczników.
Seam detection on towels
The seam on towels should be detected.
|
|
|
:
|
APP N° 775
Param.:
|
INI:
|
|
Rozróżnianie szarych wykładzin Powinny być rozróżniane między sobą wykładziny w kolorze szarym.
Grey carpet differentiation
Grey carpets should be differentiated.
|
|
|
:
|
APP N° 774
|
Rozróżnianie między stroną PET a stroną PE w płytach z tworzyw sztucznych Powinny być rozróżniana strona PET w płytach z tworzyw sztucznych od strony PE.
Differentiation of PE and PET side of plastic plates
The PET side of plastic plates should be differentiated from the PE side.
|
|
|
:
|
APP N° 773
|
Kontrola obecności przezroczystych naklejek na kołpakach z tworzywa sztucznego Powinna być kontrolowana obecność przezroczystych etykiet na kołpakach z tworzyw sztucznych.
Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.
|
|
|
:
|
APP N° 772
|
Pomiar grubości wycieraczek podłogowych Powinna być mierzona grubość wycieraczek podłogowych.
Thickness control of abrasive carpets
The thickness of abrasive carpets should be measured.
|
|
|
:
|
APP N° 771
|
Kontrola barwy prętów drewnianych Powinien być sprawdzany kolor prętów drewnianych.
Color control of wooden sticks
The color of wooden sticks should be controlled.
|
|
|
:
|
APP N° 770
Param.:
|
|
Pomiar połysku papierów ściernych Powinien być ustalany współczynnik połysku papierów ściernych.
Gloss measurement of sandpapers
The gloss factor of sandpapers should be measured.
|
|
|
:
|
APP N° 769
Param.:
|
|
Kontrola koloru prętów światłowodowych Powinien być sprawdzany kolor prętów światłowodowych.
Color control of light pipes
The color of light pipes should be controlled.
|
|
|
:
|
APP N° 768
Param.:
|
|
Pomiar koloru lakierowanych płyt aluminiowych Powinien być mierzony kolor lakierowanych płyt aluminiowych.
Color measurement of lacquered aluminum plates
The color of lacquered aluminum plates should be measured.
|
|
|
:
|
APP N° 767
|
Pomiar połysku lakierowanych płyt aluminiowych Powinien być ustalany stopień połysku lakierowanych płyt aluminiowych.
Gloss measurement of painted aluminum plates
The gloss factor of lacquered aluminum plates should be measured.
|
|
|
:
|
APP N° 766
|
Pomiar połysku folii dekoracyjnych Powinien być ustalany stopień połysku folii dekoracyjnych.
Gloss measurement on decorative films
The gloss factor should be measured on different decorative films.
|
|
|
:
|
APP N° 765
Param.:
|
INI:
|
|
Rozpoznawanie znaczników barwnych na plastykowych taśmach klejących przepuszczających światło Powinny być rozpoznawane znaczniki barwne na przezroczystych taśmach klejących z tworzywa sztucznego.
Color mark recognition on transparent plastic films
A color mark on a translucent synthetic tape should be recognized.
|
|
|
:
|
APP N° 764
Param.:
|
INI:
|
|
Kontrola położenia części plastykowych Powinna być sprawdzana prawidłowość położenia przezroczystych części z tworzywa sztucznego.
Synthetic component orientation control
The orientation of transparent plastic parts should be controlled.
|
|
|
:
|
APP N° 763
Param.:
|
INI:
|
|
Wykrywanie znaczników barwnych na przezroczystych taśmach klejących Powinny być wykrywane znaczniki barwne na przezroczystych taśmach klejących.
Color mark detection on transparent plastic adhesive strips
Color marks should be detected on transparent synthetic glue strips.
|
|
|
:
|
APP N° 762
|
Kontrola wytłaczanych części metalowych Powinno być kontrolowana dokładna pozycja wytłaczanych części metalowych.
Position control of metal stamping parts
The position of metal stamping parts should be controlled.
|
|
|
:
|
APP N° 761
|
Pomiar koloru drutów z tworzywa sztucznego Powinien być mierzony kolor drutów z tworzywa sztucznego.
Color measurement of synthetic wires
The color of synthetic wires should be measured.
|
|
|
:
|
APP N° 760
Param.:
|
|
Rozróżnianie elementów plastyku i ze skóry do montowania we wnętrzu pojazdu Elementy ze skory powinny się odróżniać we wnętrzu pojazdu od części wykonanych z tworzyw sztucznych.
Differentiation of interior leather and plastic parts
Interior leather and plastic parts should be differentiated.
|
|
|
:
|
APP N° 759
Param.:
|
INI:
|
|
Rozróżnianie elementów ze skóry i z tworzyw sztucznych do montowania we wnętrzu pojazdu Elementy ze skory powinny się odróżniać we wnętrzu pojazdu od części wykonanych z plastyku.
Differentiation of leather and synthetic interior components
Leather interior components should be differentiated from synthetic interior components.
|
|
|
:
|
APP N° 758
Param.:
|
INI:
|
|
Rozróżnianie komponentów z tworzyw sztucznych do montowania we wnętrzu pojazdu Powinny być rozróżniane komponenty z tworzyw sztucznych we wnętrzu pojazdu.
Differentiation of interior plastic components
Interior plastic parts should be differentiated.
|
|
|
:
|
APP N° 757
|
Pomiar prędkości obrotowej wirników turbosprężarki doładowującej Powinna być kontrolowana częstotliwość wirników turbosprężarki doładowującej.
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled.
|
|
|
:
|
APP N° 756
Param.:
|
|
Detekcja opadającej i wznoszącej się flanki taśmy metalowej na podłożu metalu Zarówno wznoszące się jak i opadające flanki taśm metalowych na blachach powinny być rejestrowane.
Detection of a rising and falling edge of a metal stripe on metal sheet
A rising as well as a falling edge of a metal stripe on metal sheet should be detected.
|
|
|
:
|
APP N° 755
Param.:
|
|
Rozróżnianie nakrętek śrub z zastosowaniem kontroli średnic wewnętrznych Nakrętki M8 i M10 powinny być odróżniane metodą pomiaru Inline średnicy wewnętrznej.
Inside diameter differentiation of threaded nuts
M8 and M10 screw-nuts should be inline differentiated by inner diameter measurement.
|
|
|
:
|
APP N° 754
Param.:
|
|
Kontrola średnicy wewnętrznej w gwintowanych nakrętkach Powinna być kontrolowana średnica wewnętrzna
w nakrętkach gwintowanych.
Inner diameter control of screw-nuts
The inner diameter of screw-nuts should be measured.
|
|
|
:
|
APP N° 753
|
Liczenie drutów w skręcarkach do lin Powinna być liczona ilość drutów w skręcarkach do lin podczas procesu nawijania.
Wire counting on wire winding machines
The number of wires on a wire winding machine should be counted.
|
|
|
:
|
APP N° 752
|
Wykrywanie obecności oleju na nitośrubach Powinna być kontrolowana obecność oleju na nitośrubach.
Detection of the presence of oil on rivet screws
The presence of oil on rivet screws should be detected.
|
|
APP N° 751
|
Wykrywanie filmu olejowego na trzpieniach metalowych Należy sprawdzać obecność filmu olejowego na trzpieniach metalowych.
Oil film detection on metal pins
An oil film on metal pins should be detected.
|
|
|
:
|
APP N° 750
Param.:
|
|
Pomiar koloru włókna bawełnianego barwionego na żółto Podczas produkcji powinien następować pomiar koloru włókna bawełnianego barwionego na żółto.
Color measurement of dyed yellow cotton strands
The color of cotton strands should be measured during the tinting process.
|
|
|
:
|
APP N° 749
Param.:
|
INI:
|
|
Separacja kolorów materiałów tekstylnych w trakcie recyclingu W trakcie procesu recyclingu powinny być sortowane tekstylia ze względu na kolor.
Color separation of recycled textiles
During the recycling process textiles should be color separated.
|
|
|
:
|
APP N° 748
Param.:
|
|
Rozróżnianie barwy części z tworzyw sztucznych we wnętrzu pojazdu Powinny być rozróżniane barwy komponentów plastykowych we wnętrzu pojazdu.
Color differentiation of plastic interior components
Plastic interior parts should be differentiated.
|
|
|
:
|
APP N° 747
|
Rozróżnianie elementów ze skóry i z tworzyw sztucznych we wnętrzu pojazdu We wnętrzu pojazdu powinny być oddzielane komponenty ze skóry od elementów plastykowych.
Differentiation of leather and leather imitation interior components
Leather interior components should be differentiated from plastic interior parts.
|
|
|
:
|
APP N° 746
Param.:
|
|
Pomiar koloru płyt z tworzyw sztucznych o różnych powierzchniach Powinien być przeprowadzany pomiar koloru płyt z tworzyw sztucznych gładkich, a także o średniej i dużej chropowatości.
Color measurement of plastic plates with different structures
The color of plastic plates with a fine, middle and coarse surface should be measured.
|
|
|
:
|
APP N° 745
Param.:
|
|
Pomiar koloru przędzy poliestrowej Powinien być mierzony kolor przędzy poliestrowych.
Color measurement of polyester thread
The color of polyester thread should be measured.
|
|
|
:
|
APP N° 744
Param.:
|
|
Pomiar koloru tkanin poliestrowych Powinien być mierzony kolor tkanin poliestrowych.
Color measurement of polyester mesh
The color of polyester mesh should be measured.
|
|
|
:
|
APP N° 743
Param.:
|
|
Pomiar częstotliwości wirujących wentylatorów Powinna być ustalana częstotliwość obracających się wentylatorów.
Frequency measurement of rotating fans
The frequency of rotating blowers should be measured.
|
|
|
:
|
APP N° 742
Param.:
|
|
Wykrywanie znaczników barwnych w brzeszczotach pił Powinny być wykrywane znaczniki barwne w brzeszczotach pił.
Color mark detection on saw blades
Color marks should be detected on saw blades.
|
|
|
:
|
APP N° 741
Param.:
|
|
Rozpoznawanie znaku barwnego na śrubach metalowych Powinny być wykrywane oznaczenia barwne na powierzchni czołowej w śrubach metalowych.
Color mark detection on metal screws
The color mark on metal screws should be detected.
|
|
|
:
|
APP N° 740
Param.:
|
|
Rozróżnianie strony tylnej od przedniej komponentów wykonanych z tworzyw sztucznych Strona tylna płaskich części z tworzywa sztucznego powinna różnić się od strony przedniej.
Backside/frontside differentiation of synthetic parts
The backside should be differentiated from the frontside of flat synthetic components.
|
|
|
:
|
APP N° 739
Param.:
|
|
Rückseite unterschieden werden. Rozróżnianie części przedniej i tylnej wykonanej z tworzywa sztucznego Powinna być odróżniana strona przednia w płaskich komponentach z tworzyw sztucznych od strony tylnej.
Frontside and backside differentiation of a plastic part
The frontside of a flat plastic part should be differentiated from the backside.
|
|
|
:
|
APP N° 738
Param.:
|
|
Rozpoznawanie miejsc sklejania papierosów Powinny być rozpoznawane miejsca klejenia papierosów.
Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.
|
|
|
:
|
APP N° 737
Param.:
|
|
Wykrywanie spoin na puszkach blaszanych Powinny być wykrywane spoiny na puszkach z blachy.
Welding line detection of tin cans
The welding line on tin cans should be detected.
|
|
|
:
|
APP N° 736
Param.:
|
INI:
|
|
Rozróżnianie barwy w kolorze jasnym i ciemnym na łbach śrub Powinny być rozróżniane głowice śrub w kolorze srebrnym od pokrytych kolorem czarnym.
Differentiation of silver-colored screws from black coated screws
Silver-colored screws should be differentiated from black coated screws.
|
|
|
:
|
APP N° 735
Param.:
|
INI:
|
|
Rozpoznawanie znaku barwnego na elementach łożysk ślizgowych Powinny być rozpoznawane oznaczenia barwne na częściach łożysk ślizgowych.
Color mark detection on slide bearings
The color mark on slide bearings should be detected.
|
|
|
:
|
APP N° 734
Param.:
|
|
Odróżnianie komponentów wnętrza wykonanych ze skóry i PCV. Powinny być odróżniane części wykonane ze skóry od części z PCV.
Differentiation of leather from PVC interior components
Leather interior parts should be differentiated from PVC components.
|
|
|
:
|
APP N° 733
|
Pomiar średnicy wewnętrznej części metalowych Powinna być kontrolowana średnica komponentów wykonanych z metalu.
Inner diameter measurement of metal components
The inner diameter of metal components should be measured.
|
|
|
:
|
APP N° 732
|
Wykrywanie szczeliny między dwoma sąsiadującymi laminatami Powinna być rozpoznawana szczelina między laminatami.
Detection of a gap between vinyl layers
A gap between vinyl layers should be detected.
|
|
|
:
|
APP N° 731
|
Rozróżnianie strony cynowanej od powietrznej w szkle typu float W przypadku szkła float powinna być odróżniana strona cynowana od strony powietrznej.
Differentiation of tin and air side of float glasses
The tin side should be differentiated from the air side of float glasses.
|
|
|
:
|
APP N° 730
|
Kontrola gęstości włókien w cienkich włókninach Powinna być kontrolowana gęstość włókien we włókninach.
Fiber density control of fiber sheets
The density of fiber sheets should be controlled.
|
|
|
:
|
APP N° 729
|
Liczenie fałd w filtrach olejowych oraz powietrznych Powinny być wykrywane fałdy w filtrach olejowych oraz powietrznych.
Counting of folds on oil and air filter mats
Folds of oil and air filter mats should be detected.
|
|
|
:
|
APP N° 728
Param.:
|
|
Rozpoznawanie połączenia zgrzewanego na puszcze blaszanej Powinna być rozpoznawana zgrzeina na zadrukowanej puszcze z blachy.
Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.
|
|
|
:
|
APP N° 727
|
Pomiar grubości płyt do izolacji cieplnej Powinna być mierzona grubość płyt do izolacji cieplnej.
Thickness measurement of thermal insulation panels
The thickness of thermal insulation panels should be measured INLINE.
|
|
|
:
|
APP N° 726
|
Kontrola wysokości sprężyn spiralnych wykonanych z metalu Powinna być mierzona wysokość sprężyn spiralnych wykonanych z metalu.
Metal spring height control
The height of metal springs should be measured.
|
|
|
:
|
APP N° 725
|
Pomiar grubości uszczelek płaskich Powinna być mierzona grubość uszczelek płaskich.
Thickness measurement of flat gaskets
The thickness of flat gaskets should be measured.
|
|
|
:
|
APP N° 724
|
Rozróżnianie koloru między jasnymi, przezroczystymi częściami z tworzyw sztucznym w odcieniu niebies-kim i żółtym Powinny być odróżniane przezroczyste części plastyku w odcieniu żółtym od jasnych części z tworzyw sztucz-nych w odcieniu niebieskim.
Differentiation of yellowish cast to bluish shade clear transparent plastic components
Clear bluish transparent plastic components should be differentiated from yellowish parts.
|
|
|
:
|
APP N° 723
Param.:
|
|
Rozróżnianie barwy jasnych, przezroczystych części z tworzyw sztucznych Powinny być odróżniane jasne, przezroczyste części z two-rzyw sztucznych w żółtym odcieniu od części w odcieniu niebieskim.
Color differentiation of clear transparent plastic parts
A yellowish cast to a bluish shade of transparent clear plastic components should be detected.
|
|
|
:
|
APP N° 722
Param.:
|
|
Rozróżnianie niebieskawych i żółtawych komponentów plastykowych Powinny być rozróżniane białe części z tworzywa sztucznego z tendencją zbliżania się do koloru niebieskiego od części białych z przechodzeniem do koloru żółtego.
Differentiation of bluish and yellowish colored plastic parts
Blueish colored plastic parts should be differentiated from yellowish colored plastic components.
|
|
|
:
|
APP N° 721
Param.:
|
|
Rozróżnianie między komponentami matowymi i wykonanymi z połyskiem we wnętrzach pojazdów wytwarzanych w przemyśle motoryzacyjnym We wnętrzu pojazdu powinny być rozróżniane elementy matowe od posiadających połysk.
Differentiation of shiny and matt automotive interior components
Matt and shiny interior components should be differentiated.
|
|
|
:
|
APP N° 720
Param.:
|
|
Wykrywanie znaczników barwnych na płytach drewnianych Na płytach drewnianych powinny być rozpoznane znaczniki barwne. Znacznikami są linie w kolorze czerwonym, zielonym lub czarnym o szerokości ok. 2 mm.
Color mark detection on wood plates
Color marks on wood plates should be detected. It should be noted that the color marks are black, green or red lines with a width of around 2mm.
|
|
|
:
|
APP N° 719
Param.:
|
|
Kontrola powierzchni blach ze stali szlachetnych Należy kontrolować powierzchnie zewnętrzne blach ze stali szlachetnych.
Surface control of stainless-steel sheets
The surface of stainless-steel sheets should be controlled.
|
|
|
:
|
APP N° 718
|
Wykrywanie kleju na tkaninie podstawowej dywanu Powinna być sprawdzana obecność warstwy kleju na tkaninie podstawowej dywanów.
Glue detection on carpet backing
The presence of glue should be controlled on carpet backing.
|
|
|
:
|
APP N° 717
Param.:
|
|
Liczenie fałd na wężach aluminiowych Powinny być liczone fałdy na wężach z aluminium. Należy zauważyć, że odstęp między kolejnymi fałdami może być różny.
Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.
|
|
|
:
|
APP N° 716
Param.:
|
|
Liczenie przezroczystych pokrywek z tworzywa sztucznego Powinny być liczone przepuszczające światło pokrywki
z tworzywa sztucznego.
Counting of transparent plastic lids
Transparent plastic lids should be counted.
|
|
|
:
|
APP N° 715
Param.:
|
|
Liczenie przepuszczających światło kubków z tworzywa sztucznego Powinny być liczone przezroczyste kubki plastykowe.
Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.
|
|
|
:
|
APP N° 714
|
Liczenie pojedynczych arkuszy Powinny być liczone nakładające się na siebie
i transportowane na przenośniku pojedyncze arkusze.
Single paper sheet counting
Single sheets imbricated and transported on a conveyor belt should be counted.
|
|
|
:
|
APP N° 713
Param.:
|
|
Liczenie przezroczystych pojemników z tworzywa sztucznego Powinny być liczone ściśle przylegające do siebie przezroczyste pojemniki z tworzywa sztucznego.
Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.
|
|
|
:
|
APP N° 712
|
Liczenie worków papierowych Bezpośrednio po wykonaniu worków papierowych, powinny być one liczone na przenośniku. Należy zwrócić uwagę, że po pierwsze, każdy worek posiada podwójną krawędź i po drugie, że odstęp między workami i w związku z tym wysokość stosu może być zmienne.
Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.
|
|
|
:
|
APP N° 711
Param.:
|
|
Kontrola koloru płynnych lakierów przez wzierniki Barwa płynnych lakierów powinna być kontrolowa-na przez wzierniki. Należy przy tym przestrzegać, aby płytki szklane posiadały powierzchnię refleksyjną.
Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
|
|
|
:
|
APP N° 710
|
Liczenie pokrywek z tworzywa sztucznego ułożonych w stosie Pokrywki z tworzywa sztucznego ułożone w stosie powinny być liczone metodą bezdotykową.
Counting of stacked plastic lids
Stacked plastic lids should be counted.
|
|
APP N° 709
Param.:
|
INI:
|
|
Rozróżnianie barwy strony przedniej - tylnej w komponentach wewnętrznych ze skóry Powinny być rozróżniana barwa strony przedniej i tylnej komponentów wewnętrznych wykonanych ze skóry.
Backside–frontside color differentiation of leather interior components
Leather interior components should be color differentiated related to the backside–frontside.
|
|
|
:
|
APP N° 708
Param.:
|
INI:
|
|
Rozróżnianie barwy lakierowanych części z tworzywa sztucznego Barwy lakierowanych części z tworzywa sztucznego powinny być rozróżniane.
Color differentiation of painted plastic components
Lacquered plastic components should be color differentiated.
|
|
|
:
|
APP N° 707
Param.:
|
|
Rozróżnianie barwy lakierowanych części plastykowych Onyx - lakierowane w kolorze czarnym komponenty z tworzywa sztucznego powinny być odróżniane od części pokrytych takim samym lakierem.
Color differentiation of lacquered plastic components
Painted onyx-black components should be differentiated from lacquered black components.
|
|
|
:
|
APP N° 706
Param.:
|
INI:
|
|
Rozróżnianie koloru różnych gatunków kawy Powinny być rozróżniane kolory różnych gatunków kawy.
Color differentiation of different types of coffee
Different types of coffee should be distinguished by color.
|
|
|
:
|
APP N° 705
|
Rozróżnianie między etykietami z białego papieru i białą syntetyczną watą Powinny być odróżniane etykiety z białego papieru od białej syntetycznej waty.
Differentiation of white paper and white synthetic cotton
White paper should be differentiated from white synthetic cotton.
|
|
|
:
|
APP N° 704
|
Rozpoznanie znaku grawerowanego laserem na pręcie ze stali szlachetnej Powinny być rejestrowane znaki grawerowane laserem umieszczane na prętach ze stali szlachetnej.
Detection of a laser-engraved mark on a stainless-steel rod
Laser-engraved marks on stainless steel rods should be detected.
|
|
|
:
|
APP N° 703
|
Kontrola położenia i kąta rozpylanego strumienia cieczy przez dysze wycieraczek do szyb Powinno być sprawdzane położenie oraz kąt wylotu strumienia cieczy wytwarzanego przez dysze wy-cieraczek do szyb samochodowych. Dysze wyciera-czek o wysokiej jakości wytwarzają dwa równolegle skierowane strumienie oraz jeden w kształcie wach-larza. Dodatkowo powinien być kontrolowany także kąt otworu strumienia wachlarzowego oraz ilość cieczy wypływającej w strumieniach kojarzonych.
Position and angle control of washer jets
The position and angle of washer jets should be controlled. High-end washer jets provide normally two near-collimated water jets with a rigid angle and a fan beam with a wide angle. The task of the measuring instrument is furthermore to control the opening angle of the fan beam as well as the amount of water in the near-collimated water jets.
|
|
|
:
|
APP N° 702
|
Detekcja znaków towarowych na opakowaniach z papieru Powinny być wykrywane znaki towarowe na torbach papierowych. Należy przy zawracać uwagę, żeby rozpoznawane były zarówno czarne znaki na białym tle, jak i białe na tle czarnym.
Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.
|
|
|
:
|
APP N° 701
|
Kontrola procesu spawania laserowego Podczas spawania laserowego powinna być badana powstająca emisja świetlna
z uwzględnieniem barwy i intensywności.
Laser welding process control
During the laser welding the color as well as the intensity of the emitted light, caused by the laser welding, should be controlled.
|
|
|
:
|
APP N° 700
Param.:
|
|
Pomiar barwy eloksalowanych części aluminiowych Powinny być mierzone barwy eloksalowa-nych komponentów aluminiowych.
Color measurement of anodized aluminum parts
The color of anodized aluminum parts should be measured.
|
|
|
:
|
APP N° 699
|
Pomiar transmisji UVA płytek z tworzyw sztucznych Powinny być mierzone właściwości światła przechodzącego w obszarze UVA.
UVA transmittance of plastic plates
The UVA transmittance of plastic plates should be measured.
|
|
|
:
|
APP N° 698
|
Pomiar odstępu płyt izolacyjnych Powinien być mierzony odstęp do płyt izolacyjnych.
Distance measurement to insulation panels
The distance to insulation panels should be measured.
|
|
|
:
|
APP N° 697
|
Pomiar odstępu na szybach z pleksiglasu Powinien być mierzony odstęp do bocznych okien z tworzywa sztucznego.
Distance measurement of plastic side windows
The distance to plastic side windows should be measured.
|
|
|
:
|
APP N° 696
|
Rozróżnianie barw czarnych i brązowych komponentów z tworzyw sztucznych we obszarze wewnętrznym Powinny być rozróżniane brązowe i czarne imitacje skóry.
Color differentiation of black and brown interieur plastic components
Black and brown interior plastic parts should be color differentiated.
|
|
|
:
|
APP N° 695
Param.:
|
|
Pomiar połysku imitacji skóry w obszarze wewnętrznym Powinien być ustalany połysk imitacji skóry z tworzywa sztucznego.
Gloss measurement of leather imitations
The gloss of leather interior imitations should be measured.
|
|
|
:
|
APP N° 694
Param.:
|
INI:
|
|
Kontrola fluorescencji barwnej szpuli przędzy Szpule przędzy powinny być rozróżniane z uwagi na barwę fluorescencji.
Fluorescence color control of yarn bobbins
The fluorescence color of yarn bobbins should be controlled.
|
|
|
:
|
APP N° 693
Param.:
|
INI:
|
|
Sprawdzanie prawidłowości położenia ziaren kukurydzy Powinno być kontrolowane wyrównanie ziaren kukurydzy.
Orientation control of maize kernels
During the corn handling, the orientation of maize kernels should be controlled.
|
|
|
:
|
APP N° 692
|
Kontrola istnienia taśmy rozrywającej na paczce papierosów Powinno być sprawdzane istnienie taśm rozrywających na paczkach papierosów.
Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.
|
|
|
:
|
APP N° 691
Param.:
|
|
Rozpoznawanie znaku barwnego na metalowej folii Powinny być wykrywane różne znaki barwne na różnych barwnych foliach metalowych.
Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.
|
|
|
:
|
APP N° 690
|
Rozpoznanie luki na śladzie kleju naniesionym na folii aluminiowej Przerwy na śladzie kleju na folii aluminiowej powinny być rozpoznawane od wymiaru 5 mm x 1 mm.
Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.
|
|
|
:
|
APP N° 689
Param.:
|
INI:
|
|
Rozróżnianie kolorów lakierowanych komponentów z tworzywa sztucznego dla przemysłu motoryzacyjnego Lakierowane części z tworzywa sztucznego w branży motoryzacyjnej powinny być separowane z uwagi na ich barwę.
Color differentiation of plastic automotive components
Lacquered automotive plastic components should be color differentiated.
|
|
|
:
|
APP N° 688
|
Rozpoznawanie miejsc klejenia filtrów papierosowych Musi być kontrolowana jakość miejsc sklejania w filtrach papierosowych.
Splice inspection of cigarette filters
The splices of cigarettes should be controlled.
|
|
|
:
|
APP N° 687
|
Kontrola obecności naklejek przezroczystych Powinna być sprawdzana obecność przezroczystych etykiet.
Presence control of transparent labels
The presence of transparent labels should be controlled.
|
|
|
:
|
APP N° 686
Param.:
|
INI:
|
|
Separacja kolorów elementów metalowych Części metalowe powinny być separowane z uwagi na ich barwę.
Color separation of metal parts
Metal parts should be separated depending on the color.
|
|
|
:
|
APP N° 685
|
Kontrola warstwy kleju na taśmach z tworzyw sztucznych Powinna być sprawdzana grubość warstwy kleju na taśmie z tworzywa sztucznego.
Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.
|
|
|
:
|
APP N° 684
|
Kontrola barwy ciemnoniebieskich osłon z tworzywa sztucznego Ciemnoniebieskie osłony z tworzywa sztucznego powinny być kontrolowane z uwagi na zachowanie granic tolerancji koloru.
Color control of deep blue plastic covers
The color of blue plastic covers should be controlled, whether the respective cover is inside the tolerance range or not.
|
|
|
:
|
APP N° 683
INI:
|
|
Wykrywanie miejsca nakładania się dwóch blach w wirnikach i następnie, czy wykonana została spoina Powinno być kontrolowana obecność spoiny w wentylatorach metalowych. Z kolei należy sprawdzić, czy obydwie blachy zachodzą na siebie i zostały zespawane.
Detection of overlapped metal plates on metal fans and further whether the metal plates are welded
The presence of welding lines should be controlled on metal fans. Furthermore, it should be controlled, whether the overlapped metal plates are welded or not welded.
|
|
|
:
|
APP N° 682
|
Rozróżnianie między powlekaną folią z tworzywa sztucznego a folią niepowlekaną Należy rozróżniać powlekaną folię z tworzywa sztucznego od folii niepokrytej żadną owłoką.
Differentiation of coated and uncoated plastic film
An uncoated plastic film should be distinguished from a coated plastic film.
|
|
|
:
|
APP N° 681
|
Kontrola barwy i jasności żarówek Powinna być kontrolowana barwa oraz jasność lamp typu Filament.
Color and intensity control of filament lamps
The color as well as the intensity of filaments lamps should be controlled.
|
|
|
:
|
APP N° 680
|
Rozróżnianie między oksydowanymi na czarno prętami metalowymi a zwykłymi prętami Oksydowane na czarno pręty metalowe powinny być odróżniane od zwykłych prętów metalowych.
Differentiation of black finished metal rod and metal rod
Black bronzed metal rods should be distinguished from metal rods.
|
|
|
:
|
APP N° 679
|
Kontrola lakieru na listwach wewnętrznych z połyskiem Powinna być nadzorowana jakość lakieru na listwach wewnętrznych
z połyskiem.
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
|
|
|
:
|
APP N° 678
Param.:
|
|
Kontrola lakieru na listwach wewnętrznych z połyskiem Powinna być nadzorowana jakość lakieru na listwach wewnętrznych z połyskiem.
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
|
|
|
:
|
APP N° 677
Param.:
|
INI:
|
|
Rozróżnianie barwy listew wewnętrznych z połyskiem Powinny być rozróżniane barwy listew wewnętrznych z połyskiem. Wymogiem w tym przypadku jest rozpiętość tonacji barwnej od ciemnej do jasnej.
Color differentiation of shiny interior trims
Shiny interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
|
|
|
:
|
APP N° 676
Param.:
|
INI:
|
|
Rozróżnianie barwy matowych listew wewnętrznych Powinny być rozróżniane barwy matowych listew wewnętrznych. Wymogiem w tym przypadku jest rozpiętość tonacji barwnej od ciemnej do jasnej.
Color differentiation of matt interior trims
Matt interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
|
|
|
:
|
APP N° 675
Param.:
|
INI:
|
|
Rozróżnianie koloru osłon głośników Powinna być rozróżniana barwa osłon głośników.
Color differentiation of loudspeaker covers
Loudspeaker covers should be color differentiated.
|
|
APP N° 674
INI:
|
|
Liczenie pokrywek z metalu Powinny być liczone pokrywki metalowe ułożone w stosie.
Counting of metal lids
Metal lids should be counted in a stack.
|
|
|
:
|
APP N° 673
|
Kontrola strumienia rozpylanej cieczy za pomocą systemu przechodzącego promieniowania laserowego Intensywność oraz geometria strumienia rozpylanej cieczy powinna być kontrolowana w bezpośredniej bliskości wylotu z dyszy.
Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.
|
|
|
:
|
APP N° 672
Param.:
|
|
Kontrola obecności półprzezroczystej pokrywki fluorescencyjnej na białym pojemniku z tworzywa sztucznego Powinna być kontrolowana obecność półprzezroczystej pokrywki fluorescencyjnej na pojemniku plastykowym.
Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.
|
|
|
:
|
APP N° 671
Param.:
|
|
Wykrywanie przedniej i tylnej strony dywanów Strona przednia dywanów powinna różnić się od strony odwrotnej.
Backside-, frontside detection of carpets
The backside from a carpet should be differentiated from the frontside.
|
|
|
:
|
APP N° 670
Param.:
|
|
Rozpoznawanie śladów kleju na papierze do filtrów papierosowych Na papierze do filtrów papierosowych powinny być rozpoznawane pozostałości kleju. Należy zwracać uwagę, żeby klej był rozpuszczalny w wodzie.
Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.
|
|
|
:
|
APP N° 669
Param.:
|
|
Rozpoznawanie różnych kapsli kolorowych wewnątrz filtrów papierosowych Powinny być rozpoznawane zabarwione kapsle umieszczone wewnątrz filtra papierosowego.
Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.
|
|
APP N° 668
Param.:
|
|
Rozróżnianie fluorescencji barwnej elementów wewnątrz samochodu Komponenty w obszarze wewnętrznym samochodu powinny być odróżniane od siebie za pomocą barwnej fluorescencji.
Color-fluorescence differentiation of interior automotive components
Interior automotive parts should be color differentiated.
|
|
|
:
|
APP N° 667
Param.:
|
|
Rozróżnianie barw elementów wewnątrz samochodu wykonanych ze skóry Komponenty wewnątrz samochodu powinny być rozróżniane z uwagi na swój kolor.
Color differentiation of leather interior components
Leather interior parts used in the automotive area should be color differentiated.
|
|
|
:
|
APP N° 666
Param.:
|
|
Wykrywanie stron przednich / tylnych arkuszy z papieru laminowanego na czarno Powinno być rozpoznawane prawidłowe położenie arkuszy
z papieru laminowanego na czarno. Należy przy tym zwracać uwagę na to, żeby przednia strona posiadała wyciśnięty wzór prostokątny.
Frontside / backside detection of black laminated paper sheets
The correct direction of black laminated paper sheets should be detected. It should be noted, that the frontside is slightly marked with a rectangular pattern.
|
|
|
:
|
APP N° 665
|
Rozpoznanie reliefu na butelkach szklanych Powinny być rozpoznawane reliefy na różnych butelkach szklanych.
Relief detection on glass bottles
Reliefs on different glass bottles should be detected.
|
|
|
:
|
APP N° 664
|
Rozróżnianie kół zębatych Koła zębate niepoddane obróbce chemicznej powinny być rozróżniane od kół oksydowanych.
Gear differentiation
Chemically non-treated gears should be distinguished from blackened gears.
|
|
|
:
|
APP N° 663
Param.:
|
|
Kontrola obecności wydrukowanej ilustracji fluoryzującej Powinna być sprawdzana obecność wydrukowanej ilustracji fluoryzującej.
Fluorescent print presence control
The presence of a fluorescent print on plastic film should be controlled.
|
|
|
:
|
APP N° 662
Param.:
|
|
Kontrola ekstremalnie słabego rozpylania Powinno być nadzorowane istnienie i także intensywność w przypadku bardzo słabego rozpylania.
Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.
|
|
|
:
|
APP N° 661
|
Pomiar grubości maty grafitowej Powinna zostać ustalona grubość włókniny grafitowej.
Graphite fabric thickness measurement
The thickness of a graphite fabric should be measured.
|
|
|
:
|
APP N° 660
Param.:
|
|
Rozpoznawanie spoin na rurze ze stali szlachetnej Powinna być wykrywana spoina na tulei ze stali szlachetnej podczas jej obrotu.
Welding line detection on stainless steel tubes
The welding line on stainless-steel tubes should be detected. At this, the stainless-steel tube is rotating.
|
|
|
:
|
APP N° 659
|
Wykrywanie różnych primer Powinny zostać rozpoznane różne, fluoryzujące primer. Należy przy tym zwracać uwagę, żeby primer został naniesione na czarną powierzchnię.
Detection of different primers
Different, fluorescent primers should be detected. Here, the primers will be applied on a black surface.
|
|
|
:
|
APP N° 658
Param.:
|
|
Wykrywanie filmu olejowego w strefach tłoczenia Powinna być wykrywana obecność warstw oleju w miejscach przeprowadzania procesu tłoczenia. Zwłaszcza po myciu w tych miejscach muszą zostać rozpoznane pozostałości materiałów smarowych.
Oil film detection on metal stamping stripes
The presence of an oil film on metal stripes should be detected. Especially after the cleaning process remaining residues of lubricants must be recognized.
|
|
|
:
|
APP N° 657
Param.:
|
INI:
|
|
As esferas coloridas semitransparentes localizadas dentro das seções transparentes das hastes de filtro devem ser diferenciadas por cores. As esferas coloridas semitransparentes localizadas dentro das seções transparentes das hastes de filtro devem ser diferenciadas por cores.
Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.
|
|
|
:
|
APP N° 656
Param.:
|
INI:
|
|
Kontrola koloru półprzezroczystych kulek w przezroczystych tulejach z tworzywa sztucznego Powinna być kontrolowana barwa półprzezroczystych, kolorowych kulek, które znajdują się
w przezroczystych odcinkach tulei z tworzywa sztucznego w prętach filtracyjnych.
Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.
|
|
|
:
|
APP N° 655
Param.:
|
|
Pomiar grubości warstwy bezbarwnego kleju na optycznie przezroczystej folii plastikowej fluoryzującej pod wpływem promieniowania ultrafioletowego Powinna być mierzona grubość warstwy bezbarwnego kleju na przezroczystej i fluoryzującej pod wpływem promieniowania ultrafioletowego przezroczystej folii.
Thickness control of a transparent adhesive layer on a UV fluorescent transparent plastic film
The thickness of a transparent glue on a transparent but fluorescent plastic film should be measured.
|
|
|
:
|
APP N° 654
Param.:
|
|
Rozpoznanie warstwy fluorescencyjnej na czarnej skórze Powinna być rejestrowana luka wynosząca 5 mm w warstwie fluorescencyjnej na czarnej powierzchni skóry.
Detection of fluorescent coating on black leather
A gap with a width of 5mm in the fluorescent coating on a black leather surface should be detected.
|
|
|
:
|
APP N° 653
|
Ocena jakości liści Jakość liści powinna być ustalana na podstawie charakterystyki fluorescencyjnej.
Evaluation of the quality of leaves
The quality of leaves should be evaluated in using the fluorescent effect.
|
|
|
:
|
APP N° 652
Param.:
|
|
Kontrola obecności warstwy kleju na elementach z tworzywa sztucznego Powinny być sprawdzane ślady kleju na czarnej powierzchni tworzywa sztucznego.
Glue bead presence control on plastic components
The presence of adhesive on black plastic parts should be controlled.
|
|
|
:
|
APP N° 651
Param.:
|
INI:
|
|
Kontrola obecności warstwy primer na powierzchni tworzywa sztucznego Powinna być sprawdzana obecność warstwy primer na elemencie z tworzywa sztucznego.
Presence control of a primer layer on a plastic component
A primer layer on a plastic surface should be detected.
|
|
|
:
|
APP N° 650
Param.:
|
INI:
|
|
Kontrola położenia w spawanej metalowej rurze płaskiej Powinno być kontrolowane położenie spoiny w rurach płaskich. Należy przy tym zwrócić uwagę, żeby spoina znajdowała się na spodzie.
Correct positioning control of welded flat metal tubes
The position of a welding line on a flat tube should be controlled. At this, the welding line should be underneath.
|
|
|
:
|
APP N° 649
|
Kontrola barwy lakierowanych komponentów samochodowych Lakierowane części samochodowe powinny podlegać kontroli koloru. Komponenty, które odbiegają swoją barwą od wzorca powinny zostać odseparowane od prawidłowych części.
Color control of automotive paints
Automotive paints should be color differentiated. At this, the correct parts should be separated from the incorrect parts.
|
|
|
:
|
APP N° 648
Param.:
|
|
Pomiar barwy lakierów samochodowych Powinno być kontrolowane, czy wartość koloru danego lakieru w odniesieniu do odpowiedniej barwy referencyjnej znajduje się w obszarze dozwolonej tolerancji dE.
Color measurement of car paints
The color of car paints should be measured and controlled whether the respective color is inside a certain dE tolerance to the corresponding reference.
|
|
|
:
|
APP N° 647
Param.:
|
INI:
|
|
Pomiar barwy płyt szklanych Powinna być mierzona barwa płyt szklanych, przy czym należy uwzględnić, że barwną mętną powłokę należy przykryć warstwą przezroczystą lub posiadającą połysk. Praktycznie mierzony jest kolor ale tylko przez przezroczystą warstwę na szkle, przy czym należy unikać wpływu odbicia bezpośredniego na wynik pomiaru.
Color measurement of glass plates
The color of glass plates should be measured. It should be noted, that the colored opaque glass layer is covered from a transparent shiny glass layer and the color should be measured through the transparent glass layer. The challenge is, to avoid that the direct reflection from the surface of the transparent glass layer is influencing the color measurement result.
|
|
|
:
|
APP N° 646
Param.:
|
|
Rozpoznawanie barwnych znaków odniesienia na zadrukowanej folii aluminiowej Powinny być wykrywane czarne znaki z połyskiem na czarnej matowej folii aluminiowej oraz znaki odniesienia o intensywnym kolorze pomarańczowym na podłożu o tej samej barwie.
Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.
|
|
|
:
|
APP N° 645
Param.:
|
|
Rozpoznawanie barwnych znaków odniesienia na folii aluminiowej Powinien być wykrywany znak barwny na folii aluminiowej.
Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.
|
|
APP N° 644
Param.:
|
INI:
|
|
Rozróżnianie komponentów wewnętrznych w branży motoryzacyjnej Powinny być rozróżniane różne elementy we wnętrzu pojazdów wytwarzanych w przemyśle motoryzacyjnym.
Differentiation of automotive interior components
Automotive interior components should be differentiated.
|
|
|
:
|
APP N° 643
|
Kontrola węzłów w taśmach z tworzyw sztucznych Powinny być kontrolowane taśmy plastikowe z uwagi na występujące węzły.
Knot detection on plastic straps
Knots in plastic straps should be inline detected.
|
|
|
:
|
APP N° 642
|
Kontrola powłok naniesionych na płytach szklanych Powinna być sprawdzana powłoka na płytach szklanych.
Coating control on glass plates
The different coatings on glass plates should be color controlled.
|
|
|
:
|
APP N° 641
Param.:
|
INI:
|
|
Kontrola inline spoiny na rurach ze stali szlachetnej Na rurach ze stali szlachetnej powinny być wykrywane wady spoiny. W związku z tym rura jest przesuwana wzdłuż spoiny.
Inline-control of welding line on stainless steel tubes
A welding line should be inline controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
|
|
|
:
|
APP N° 640
Param.:
|
|
Rozpoznawanie wad spoiny na rurach ze stali szlachetnej Na rurach ze stali szlachetnej powinny być wykrywane wady spoiny. W związku z tym rura jest przesuwana wzdłuż spoiny.
Welding line control on stainless steel tubes
A welding line should be controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
|
|
|
:
|
APP N° 639
Param.:
|
|
Wykrywanie spoin na rurach ze stali szlachetnej Na rurach ze stali szlachetnej powinna zostać ustalona pozycja spoiny. W związku z tym rura może zostać wprowadzona w ruch obrotowy.
Welding line detection on stainless steel tubes
A welding line should be detected on stainless steel tubes. At this, the tube can be turned.
|
|
APP N° 638
Param.:
|
|
Kontrola barwy listew ozdobnych Listwy ozdobne powinny być kontrolowane z uwagi na kolor.
Color control of trims
Trims should be color controlled.
|
|
APP N° 637
Param.:
|
INI:
|
|
Rozróżnianie między komponentami tekstylnymi a alcantara we wnętrzu Komponenty tekstylne i alcantara powinny być rozróżniane.
Differentiation of fabric and alcantara interior components
Fabric and alcantara interior components should be differentiated.
|
|
|
:
|
APP N° 636
Param.:
|
INI:
|
|
Rozróżnianie barwy obudów lusterek wstecznych Powinien być kontrolowany kolor obudów lusterek wstecznych.
Color differentiation of rearview mirror housings
Rearview mirror housings should be color differentiated.
|
|
|
:
|
APP N° 635
Param.:
|
INI:
|
|
Kontrola prawidłowości położenia kołpaków z tworzywa sztucznego Powinno zostać zarejestrowana pozycja kołpaków z tworzywa sztucznego (prawidłowa lub odwrócona).
Direction control of plastic caps
The direction (upside or upside down) of plastic caps should be controlled.
|
|
APP N° 634
Param.:
|
|
Kontrola kleju na zadrukowanym papierze Na zadrukowanym papierze powinna zostać zbadana obecność i ilość naniesionego kleju oraz ewentualne jego brak w określonym miejscu.
Glue line control on printed paper
The presence, amount and gaps of a glue line on printed paper should be detected.
|
|
|
:
|
APP N° 633
Param.:
|
INI:
|
|
Pomiar ilości sadzy na bibułce filtracyjnej Powinna zostać ustalona ilość sadzy na bibułce filtracyjnej.
Soot quantity measurement on filter paper
The amount of soot on filter paper should be measured.
|
|
|
:
|
APP N° 632
Param.:
|
INI:
|
|
Rozróżnianie barwy eloksalowanych rur aluminiowych Powinny być rozróżniane barwy eloksalowanych rur aluminiowych.
Color differentiation of anodized aluminum tubes
Anodized aluminum tubes should be color differentiated.
|
|
|
:
|
APP N° 631
Param.:
|
INI:
|
|
Rozróżnianie barwy eloksalowanych profili aluminiowych Powinny być rozróżniane barwy eloksalowanych profili aluminiowych
Color differentiation of anodized aluminum profiles
Anodized aluminum profiles should be color differentiated.
|
|
|
:
|
APP N° 630
|
Rozróżnianie barwy aluminium eloksalowanego Powinny być rozróżniane eloksalowane części wykonane z aluminium.
Color differentiation of anodized aluminum components
Anodized aluminum components should be color differentiated.
|
|
|
:
|
APP N° 629
|
Rozróżnianie stron przednich od stron tylnych w taśmach papierowych Powinna być rozróżniana strona tylna żółtej jak również białej taśmy papierowej od jej strony przedniej.
Front side – backside differentiation of paper web
The backside of yellow and white paper web should be differentiated from the respective front side.
|
|
|
:
|
APP N° 628
|
Rozróżnianie między pokrytą klejem stroną przednią bibułki filtracyjnej od strony tylnej bez naniesionej warstwy Powinno być kontrolowane, czy strona przednia i tylna bibułki filtracyjnej znajdują się na górze. Tylko strona przednia posiada warstwę kleju o słabych właściwościach fluoroscencyjnych.
Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.
|
|
|
:
|
APP N° 627
|
Rozróżnianie barwy między częściami białymi i metalicznie białymi Powinny być rozróżniane części lakierowane w ko-lorze białym od komponentów lakierowanych w ko-lorze białym metalicznym.
Color differentiation between white and metallic white lacquered parts
White painted parts should be differentiated from metallic white lacquered components.
|
|
APP N° 626
|
Kontrola intensywności dodatków fluoroscencyjnych w papierze nasączonym olejem Powinna być kontrolowana intensywność dodatków fluoroscencyjnych w papierze nasyconym olejem.
Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
|
|
|
:
|
APP N° 625
|
Rozpoznawanie szczelin w metalizowanych kartach plastykowych Powinna zostać wykryta szczelina w metalizowanej karcie plastykowej
Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.
|
|
|
:
|
APP N° 624
|
Rozróżnianie barwy komponentów we wnętrzu pojazdu Powinny być rozróżniane elementy we wnętrzu pojazdu w przemyśle motoryzacyjnym
Color Differentiation of interior components
Automotive interior components should be color differentiated at a big distance.
|
|
|
:
|
APP N° 623
|
Detekcja wad w powłoce fluoryzującej na taśmie z tworzywa sztucznego Warstwa fluoryzująca pod wpływem promieniowania ultrafio-letowego naniesiona na taśmę z tworzywa sztucznego powinna zostać zbadana, czy nie występują na niej wady
Gap detection of fluorescent coating on plastic band
A gap inside fluorescent coating on a plastic ribbon should be detected.
|
|
|
:
|
APP N° 622
|
Detekcja fluoryzującego szwu w dywanie Powinien zostać rozpoznany szew fluoryzujący pod wpływem działania światła ultrafioletowego
Fluorescent thread detection on carpets
A fluorescent seam should be detected on carpet.
|
|
|
:
|
APP N° 621
|
Odróżnianie komponentów wnętrza wykonanych z drewna i włókna węglowego Elementy wykonane z drewna i włókna węglowego powinny być odróżniane od siebie
Differentiation of wooden and carbon based interior components
Wooden and carbon based interior components should be differentiated.
|
|
|
:
|
APP N° 620
|
Kontrola barwy rur ze stali szlachetnej Rury ze stali szlachetnej barwione na niebiesko powinny być odróżniane od rur nielakierowanych.
Color control of stainless steel tubes
Blue painted stainless steel tubes should be differentiated from uncolored tubes.
|
|
|
:
|
APP N° 619
|
Pomiar barwy materiałów tekstylnych Zabarwione na zielono lub oliwkowo materiały tekstyl-ne powinny być kontrolowane z uwagi na kolor.
Color measurement of fabrics
Green and olive fabrics should be color controlled.
|
|
|
:
|
APP N° 618
|
Rozróżnianie barwy szwów za osłoną z przezro-czystej folii plastikowej Powinny być kontrolowane komponenty ze szwami, które różnią się barwami.
Color differentiation of threads through shiny transparent plastic film
Components with different colored threads should be differentiated.
|
|
APP N° 617
Param.:
|
|
Pomiar wilgotności granulatu z tworzywa sztucznego Powinna być ustalana zawartość wody w granulacie z tworzywa sztucznego.
Moisture control of plastic pellets
The very low water content of plastic pellets should be measured.
|
|
|
:
|
APP N° 616
|
Rozróżnianie barwy sprężyn spiralnych wykonanych z metalu Sprężyny spiralne z metalu powinny być rozróżniane z uwagi na kolor. Odstęp przy kontroli nie powinien być mniejszy aniżeli 100 mm.
Color differentiation of metal springs
Metal springs should be color differentiated at a distance of 100mm.
|
|
|
:
|
APP N° 615
Param.:
|
INI:
|
|
Rozróżnianie komponentów we wnętrzu pojazdu w przemyśle motoryzacyjnym Powinny być rozróżniane elementy we wnętrzu pojazdów wytwarzanych w przemyśle motoryzacyjnym.
Color differentiation of interior automotive components
Interior components should be color differentiated.
|
|
APP N° 614
|
Rozróżnianie między komponentami ze skóry naturalnej i sztucznej we wnętrzu pojazdu We wnętrzu powinny być rozróżniane elementy ze skóry naturalnej i sztucznej.
Differentiation of leather and leather imitation interior parts
Leather interior parts should be differentiated from leather imitation interior components.
|
|
|
:
|
APP N° 613
|
Pomiar odstępu w cieniowanych szybach samochodowych Odstęp do szyb samochodowych powinien zostać ustalony za pomocą bezdotykowego systemu pomiarowego. Należy przy tym przestrzegać, żeby na jeden punkt pomiarowy do dyspozycji znajduje się mało miejsca, ponieważ odstęp w wielu miejscach szyby powinien zostać zmierzony w tym samym czasie.
Distance measurement to colored car glass
The distance to colored car glass should be measured. It has to be taken into account, that due to the fact, that several measuring points at the glass surface are necessary, the space for the respective measurement device, especially the frontend is limited.
|
|
|
:
|
APP N° 612
|
Badanie lakierowanych kompo-nentów z uwagi na połysk i za-dymienie Lakierowane komponenty powinny być sprawdzane pod kątem połysku i różnic zadymienia.
Investigation of lacquered components in regards to gloss and haze
Lacquered components should be controlled in regards to gloss and haze.
|
|
|
:
|
APP N° 611
|
Pomiar koloru różnie zabarwionych przezroczystych szyb pleksi Lekko zabarwione na niebiesko jak również na żółto przezroczyste szyby ze szkła akrylowego powinny zostać zmierzone z uwagi na kolor.
Color measurement of two different colored transparent Plexiglas sheets
A slightly blueish and a slightly yellowish colored transparent acrylic glass sheet should be color measured.
|
|
|
:
|
APP N° 610
Param.:
|
|
Pomiar barwy drutów miedziowanych Powinna być zmierzona barwa miedziowanych drutów.
Color measurement of copper coated wires
The color of copper anodized wires should be measured.
|
|
|
:
|
APP N° 609
Param.:
|
|
Śledzenie krawędzi z naniesionym klejem na przezroczystej folii z tworzywa sztucznego Powinny być rozpoznawane krawędzie ze ścieżką naniesionego kleju na przezroczystej folii z tworzywa sztucznego z
Glue line edge tracing on transparent plastic film
The edge of a glue line on a transparent plastic film should be detected.
|
|
|
:
|
APP N° 608
Param.:
|
|
Rozróżnianie barw obudów głośników w pojazdach samochodowych Powinien być rozróżniany kolor obudów głośników dla pojazdów samochodowych.
Color differentiation of automotive loudspeaker housings
The color of automotive loudspeaker housings should be controlled.
|
|
|
:
|
APP N° 607
Param.:
|
|
Ciągłe śledzenie krawędzi kształtowanej w twardym papierze Powinny być ciągle rozpoznawane kształtowane stopnie
w twardym papierze.
Continuous edge pursuit on embossed paper
The edge on embossed paper should be traced.
|
|
|
:
|
APP N° 606
Param.:
|
|
Pomiar barwy pół-przepuszczających światło części plastykowych Powinna być zmierzona barwa pół-przepuszczających światło części plastykowych.
Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
|
|
|
:
|
APP N° 605
Param.:
|
|
Pomiar barwy materiałów ze wzorem czarno-czerwonym Powinna być zmierzona barwa materiału ze wzorem czarno-czerwonym.
Color measurement of red-black patterned fabrics
The color of red-black patterned fabrics should be measured.
|
|
|
:
|
APP N° 604
Param.:
|
|
Pomiar barwy niebiesko-szarego materiału Powinna być zmierzona barwa niebiesko szarego materiału.
Color measurement of gray-blue fabrics
The color of gray-blue fabrics should be measured.
|
|
|
:
|
APP N° 603
Param.:
|
|
Pomiar barwy materiału ze wzorem czarno-pomarańczowym Materiał ze wzorem czarno-pomarańczowym powinien być mierzony z uwagi na barwę.
Color measurement of orange fabrics
The color of orange – black patterned textiles should be measured.
|
|
|
:
|
APP N° 602
Param.:
|
|
Pomiar barwy części z tworzywa sztucznego Powinien być mierzony kolor części z plastyku.
Color measurement of plastic parts
The color of plastic parts should be measured.
|
|
|
:
|
APP N° 601
Param.:
|
|
Rozróżnianie różnych zanieczyszczeń części metalowych Powinny być rozróżniane różne zanieczyszczenia na powierzchniach części metalowych.
Differentiation of diverse hazy metal parts
Diverse hazy metal components should be differentiated.
|
|
|
:
|
APP N° 600
Param.:
|
|
Pomiar barwy przezroczystych peletów z tworzywa sztucznego Przezroczyste pelety z plastyku powinny być kontrolowane z uwagi na barwę. W szczególności powinno być sprawdzane ich żółknięcie.
Color measurement of transparent plastic pellets
Transparent plastic pellets should be color controlled and especially the yellowing should be detected.
|
|
|
:
|
APP N° 599
Param.:
|
|
Kontrola obecności przezroczystych pasków plastykowych Powinna być sprawdzana obecność przezroczystych pasków
z tworzywa sztucznego.
Presence control of a transparent plastic film
The presence of a transparent edge strip should be controlled.
|
|
|
:
|
APP N° 598
Param.:
|
INI:
|
|
Kontrola barwy płomienia Powinna być kontrolowana barwa płomienia.
Color control of flames
The color of a flame should be controlled.
|
|
|
:
|
APP N° 597
Param.:
|
|
Rozpoznawanie czarnej linii na białym tle z dużej odległości Powinna być rozpoznawana czarna linia na białym tle ze stosunkowo dużej odległości.
Black line detection on white background at a big distance
A black line on a white background should be detected at a big distance.
|
|
|
:
|
APP N° 596
Param.:
|
INI:
|
|
Rozróżnianie między częściami metalowymi matowymi i z połyskiem Powinno następować rozróżnianie między częściami metalowymi matowymi i z połyskiem.
Differentiation of matt and shiny metal parts
Matt metal components should be differentiated from shiny metal parts.
|
|
|
:
|
APP N° 595
Param.:
|
INI:
|
|
Rozróżnianie strony przedniej i odwrotnej w plandekach samochodów ciężarowych Strona przednia plandeki samochodowej powinna różnić się od strony odwrotnej.
Differentiation of front side and backside of canvas
The front side of canvas should be differentiated from the backside.
|
|
APP N° 594
Param.:
|
|
Kontrola obecności przezroczystych nalepek na opakowaniach papierosów. Powinna być kontrolowana obecność przezroczystych etykiet na paczkach papierosów.
Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.
|
|
|
:
|
APP N° 593
Param.:
|
INI:
|
|
Rozróżnianie barwy komponentów samochodowych do zastosowania we wnętrzu Części samochodowe stosowane wewnątrz powinny być rozróżniane pod względem barwy.
Color differentiation of automotive interior parts
Automotive components used in the interior field should be color differentiated.
|
|
APP N° 592
Param.:
|
|
Kontrola wilgoci w peletach z drewna Powinna być kontrolowana zawartość wilgoci w peletach
z drewna.
Moisture control of wood pellets
The moisture of wood pellets should be controlled.
|
|
|
:
|
APP N° 591
Param.:
|
|
Kontrola wilgoci w soczewicy Powinna być kontrolowana zawartość wilgoci w soczewicy.
Moisture control of lentils
The moisture of lentils should be controlled.
|
|
|
:
|
APP N° 590
Param.:
|
|
Kontrola wilgoci w tartych orzechach Powinna być kontrolowana zawartość wilgoci
w tartych orzechach.
Moisture control of grinded nuts
The moisture of grinded nuts should be controlled.
|
|
|
:
|
APP N° 589
Param.:
|
|
Kontrola wilgoci w pszenicy Powinna być kontrolowana zawartość wilgoci
w pszenicy.
Moisture control of wheat
The moisture of wheat should be controlled.
|
|
|
:
|
APP N° 588
Param.:
|
|
Kontrola wilgoci w ryżu Powinna być kontrolowana zawartość wilgoci w ryżu.
Moisture control of rice
The moisture of rice should be controlled.
|
|
APP N° 587
Param.:
|
|
Kontrola wilgoci w cegłach Powinna być kontrolowana zawartość wilgoci w cegłach.
Moisture control of bricks
The moisture of bricks should be controlled.
|
|
APP N° 586
Param.:
|
|
Kontrola wilgoci w cegłach klinkierowych Powinna być kontrolowana zawartość wilgoci w cegłach klinkierowych.
Moisture control of clinker bricks
The moisture of clinker bricks should be controlled.
|
|
APP N° 585
Param.:
|
|
Kontrola wilgoci w cegłach betonowych Powinna być kontrolowana zawartość wilgoci w cegłach betonowych.
Moisture control of concrete blocks
The moisture of concrete blocks should be controlled.
|
|
APP N° 584
Param.:
|
|
Kontrola wilgoci w gazobetonie Powinna być kontrolowana zawartość wilgoci
w gazobetonie.
Moisture of gas concrete
The moisture of gas concrete should be controlled.
|
|
APP N° 583
Param.:
|
|
Kontrola wilgoci w papierze Powinna być kontrolowana zawartość wilgoci w papierze.
Moisture control of paper
The moisture of paper should be controlled.
|
|
APP N° 582
Param.:
|
|
Kontrola wilgoci w materiałach tekstylnych Powinna być kontrolowana zawartość wilgoci w materiałach tekstylnych.
Moisture control of fabrics
The moisture of textiles should be controlled.
|
|
APP N° 581
Param.:
|
|
Kontrola wilgoci drewna Powinna być kontrolowana zawartość wilgoci w drewnie.
Moisture control of timber
The moisture of timber should be controlled.
|
|
|
:
|
APP N° 580
Param.:
|
|
Rozpoznawanie krawędzi kubków Powinna być rozpoznawana krawędź w kubkach plastikowych.
Edge detection on plastic cups
The rims of stacked plastic cups should be detected.
|
|
|
:
|
APP N° 579
Param.:
|
|
Rozpoznawanie wad na szkle płaskim Na okrągłych tarczach szklanych powinny być rozpoznawane zarysowania i odpryski.
Defect detection on glass plates
Defects, like scratches and splintering of cutting edges on glass discs should be detected.
|
|
|
:
|
APP N° 578
Param.:
|
INI:
|
|
Kontrola barwy lakieru samochodowego Powinien być rozróżniany kolor lakierów samochodowych.
Car finish color control
Car finish colors should be controlled.
|
|
|
:
|
APP N° 577
Param.:
|
INI:
|
|
Kontrola obecności warstwy kleju na taśmie papierowej Powinna być sprawdzana obecność warstwy kleju na na taśmie papierowej.
Adhesive layer presence detection on paper web
The presence of an adhesive layer on paper web should be controlled.
|
|
|
:
|
APP N° 576
Param.:
|
INI:
|
|
Rozpoznawanie znaków wodnych na papierze bezpiecznym Powinny być rozpoznawane znaki wodne na papierze bezpiecznym.
Watermark detection on safety paper
Water reference marks should be detected on safety paper.
|
|
|
:
|
APP N° 575
Param.:
|
INI:
|
|
Rozróżnianie barwy pierścieni metalowych Pierścienie metalowe powinny być rozróżniane z uwagi na kolor.
Color differentiation of metal rings
Metal rings should be color differentiated.
|
|
|
:
|
APP N° 574
Param.:
|
INI:
|
|
Rozpoznawanie taśm klejących na taśmach z tworzywa sztucznego Na taśmach plastykowych powinny być wykrywane taśmy klejące.
Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.
|
|
|
:
|
APP N° 573
Param.:
|
INI:
|
|
Wykrywanie strefy nakładania się perforowanych rurach metalowych Na perforowanych rurach metalowych powinna być wykrywana strefa zachodzenia na siebie.
Overlap joint detection on perforated metal tubes
The overlapping area on perforated metal tubes should be detected.
|
|
|
:
|
APP N° 572
Param.:
|
|
Rozpoznawanie miejsc klejenia na paczkach papierosów. Powinno być kontrolowane istnienie miejsc klejonych na opakowaniach papierosów.
Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.
|
|
|
:
|
APP N° 571
Param.:
|
|
Rozróżnianie filtrów papierosowych Powinny być rozróżniane segmenty filtrów do papierosów.
Cigarette filter differentiation
Cigarette filter segments should be differentiated.
|
|
|
:
|
APP N° 570
Param.:
|
|
Rozpoznawanie szczeliny w filtrach papierosowych Powinny być rozpoznawane szczeliny między elementami filtrów papierosowych.
Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.
|
|
|
:
|
APP N° 569
Param.:
|
|
Kontrola pozycji szyjki butelki Powinna być mierzona wysokość szyjki butelki.
Bottle neck height control
The height of the bottle neck should be measured.
|
|
|
:
|
APP N° 568
Param.:
|
|
Pozycjonowanie butelek szklanych Butelki szklane powinny być pozycjonowane.
Glass bottle positioning
Glass bottles should be positioned.
|
|
|
:
|
APP N° 567
Param.:
|
INI:
|
|
Rozróżnianie koloru szkła płaskiego Szkło płaskie powinno być rozróżniane z uwagi na kolor.
Color differentiation of flat glasses
Flat glasses should be color differentiated.
|
|
|
:
|
APP N° 566
Param.:
|
|
Rozpoznawanie spoiny w rurze wewnętrznej W trakcie obracania na stronie rury wewnętrznej powinien być rozpoznawany szew spawany.
Inner tube welding line detection
The welding line of an inner tube should be detected during rotation.
|
|
|
:
|
APP N° 565
|
Rozróżnianie koloru części z tworzyw sztucznych stosowanych we wnętrzu samochodu Komponenty z tworzywa sztucznego stosowane we wnętrzu samochodu powinny być rozróżniane z uwagi na kolor.
Color differentiation of plastic automotive interior components
Automotive interior plastic parts should be color differentiated.
|
|
|
:
|
APP N° 564
Param.:
|
INI:
|
|
Kontrola koloru i obecności uszczelki fugi w płycie pilśniowej Powinien być sprawdzany kolor oraz obecność uszczelki fugi w płycie pilśniowej.
Joint sealing color control on fiber boards
The color as well as the presence of the joint sealing of fiber boards should be detected.
|
|
|
:
|
APP N° 563
Param.:
|
INI:
|
|
Kontrola barwy prażonej cebuli Prażona cebula powinna być sprawdzana ze względu na różnice kolorów.
Color control of roasted onions
Roasted unions should be color controlled.
|
|
|
:
|
APP N° 562
Param.:
|
|
Wykrywanie powierzchni klejonej na materiale nośnym z papieru lub tekstyliów Powinna być sprawdzana obecność warstwy klejonej na papierze lub materiale tekstylnym.
Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.
|
|
|
:
|
APP N° 561
Param.:
|
INI:
|
|
Pomiar barwy komponentów z tworzywa sztucznego Powinien być mierzony kolor części z plastyku.
Color measurement of plastic components
Plastic components should be color measured
|
|
APP N° 560
Param.:
|
|
Rozpoznawanie warstwy absorbującej promieniowanie UVC na przezroczystej folii z tworzywa sztucznego Powinno następować niezawodne rozpoznawanie obecności warstwy absorbującej promieniowanie UVC na przezroczystej folii z tworzywa sztucznego.
Detection of an UVC absorbing coating on transparent plastic film
UVC absorbing coating should be detected on transparent plastic films.
|
|
|
:
|
APP N° 559
Param.:
|
INI:
|
|
Kontrola obecności warstwy fluorescencyjnej na uszczelce gumowej Powinno być sprawdzane istnienie warstwy fluorescencyjnej na uszczelce gumowej.
Presence control of fluorescent coating
The presence of a fluorescent coating on rubber seal should be controlled.
|
|
|
:
|
APP N° 558
Param.:
|
|
Rozpoznawanie przerw w miejscach klejenia na przezroczystych etykietach. Powinna być rejestrowana pustka w miejscu klejenia na przezroczystych etykietach.
Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
|
|
|
:
|
APP N° 557
Param.:
|
INI:
|
|
Odróżnianie między czarną skórą, imitacją skóry a Alcantara Powinny być rozróżniane między sobą komponenty ze skóry, imitacji skóry oraz Alcantara.
Differentiation of black leather, leather imitation and alcantara components
Black leather interior components should be distinguished from black leather imitation as well as alcantara material.
|
|
|
:
|
APP N° 556
Param.:
|
|
Rozróżnianie koloru nici tekstylnych W maszynach do szycia należy sprawdzać różne kolory nici używanych do szycia skóry.
Color differentiation of threads
Different colored threads, used for sewing leather together, should be controlled on sewing machines.
|
|
|
:
|
APP N° 555
|
Pomiar odstępu płyt z włókna szklanego Powinien być mierzony odstęp do płyt z włókna szklanego.
Distance measurement on carbon fiber plates
The distance to carbon fiber plates should be measured.
|
|
|
:
|
APP N° 554
Param.:
|
INI:
|
|
Rozróżnianie barwy części z tworzywa sztucznego z połyskiem Komponenty z tworzywa sztucznego z połyskiem stosowane wewnątrz powinny być rozróżniane z uwagi na kolor.
Color differentiation of shiny plastic parts
Shiny plastic components, used for the interior automotive field, should be color differentiated.
|
|
|
:
|
APP N° 553
Param.:
|
INI:
|
|
Rozróżnianie barwy matowych części plastykowych Matowe komponenty z tworzywa sztucznego stosowane wewnątrz powinny być rozróżniane z uwagi na kolor.
Color differentiation of matt plastic interior components
Matt plastic parts, used for the automotive interior field, should be color differentiated.
|
|
|
:
|
APP N° 552
Param.:
|
INI:
|
|
Rozróżnianie kolorów beżowych części z tworzywa sztucznego stosowanych we wnętrzu samochodu Powinna być barwa beżowa części z tworzywa sztucznego mających zastosowanie we wnętrzu samochodu.
Color differentiation of beige interior plastic parts
Beige plastic parts, which are used in the automotive interior field, should be color differentiated.
|
|
|
:
|
APP N° 551
Param.:
|
|
Ustalenie ciężaru powierzchniowego farb drukarskich Powinien być kontrolowany ciężar powierzchniowy farb drukarskich naniesionych na płyty MDF lub HDF. Przy tym okazało się, że istnieje związek liniowy między wartością koloru siM określony na rolce dociskowej a ciężarem powierzchniowym farby drukarskiej na płycie. Oprócz tego od rodzaju wybranej farby zależny jest współczynnik proporcjonalności.
Lacquer surface weight control
The lacquer surface weight on furniture plates should be controlled. Investigations have shown that there is a proportional relation between the color space siM - parameters of the liquid paint on the pressing roll and the surface weight of the lacquer on the panel. However, the proportionality factor is dependent of the color and has to be calibrated for the respective paint.
|
|
|
:
|
APP N° 550
|
Pomiar odstępu na czarnej taśmie gumowej Powinie być mierzony odstęp od taśmy gumowej. Należy przy tym zwrócić uwagą, że powierzchnia materiału może zmieniać się od czarnej matowej do czarnej błyszczącej.
Distance measurement to black rubber band
The distance to a black rubber band should be measured. It has to be taken into account, that the surface of the rubber band can change from black matt to black shiny.
|
|
|
:
|
APP N° 549
Param.:
|
|
Pomiar połysku przezroczystych taśm z tworzywa sztucznego Powinien być badany stopień połysku różnych przezroczystych taśm z plastyku. Należy przy tym sprawdzać stronę przednią i odwrotną.
Gloss measurement of transparent plastic films
The gloss factor of different transparent plastic films should be measured on both sides.
|
|
|
:
|
APP N° 548
Param.:
|
INI:
|
|
Kontrola powłoki na powierzchni przegubu kulowego Powinna być sprawdzana powierzchnia przegubu kulowego. Należy przy tym rozróżniać powierzchnie niepokryte, pokryte, jak również „niebieskie“.
Ball joint coating control
The joint ball surface should be controlled with a view to the coating. At this, uncoated joint balls should be differentiated from coated and blue coated joint balls.
|
|
|
:
|
APP N° 547
Param.:
|
INI:
|
|
Rozpoznawanie perforowanych otworów w przezroczystych taśmach z tworzywa sztucznego Powinny być rejestrowane otwory perforowane w taśmach plastykowych.
Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
|
|
|
:
|
APP N° 546
Param.:
|
INI:
|
|
Rozróżnianie płyt HDF (płyty z włókna o wysokiej gęstości) Różnie obrobione płyty HDF powinny być wzajemnie rozdzielone. Jeden rodzaj płyt jest obrobiony tylko papierem piaskowym, drugi typ pokryty lakierem UV, natomiast w trzecim warstwa lakieru UV została ponownie przetarta papierem.
Differentiation of High Density Fiberboards (HDF-boards)
Treated High Density Fiberboards should be differentiated. At this, one board is wood sanded, the 2nd board is wood sanded with first sealer and the 3rd board is wood sanded with first sealer and lacquer sanded.
|
|
|
:
|
APP N° 545
Param.:
|
INI:
|
|
Kontrola dwóch rur plastykowych w oparciu o stronę wewnętrzną Rury z tworzywa sztucznego powinny być rozróżniane w odniesieniu do jakości powierzchni strony wewnętrznej.
Differentiation of the inner surface of plastic tubes
The inner surface of plastic tubes should be controlled.
|
|
|
:
|
APP N° 544
Param.:
|
INI:
|
|
Kontrola barwy lakierowanych klamek drzwiowych Lakierowane klamki do drzwi powinny być rozróżniane z uwagi na kolor.
Lacquered door handle color control
The color of varnished door handles should be controlled.
|
|
|
:
|
APP N° 543
Param.:
|
INI:
|
|
Kontrola barwy lakierowanych części z tworzywa sztucznego Lakierowane komponenty z tworzywa sztucznego powinny być rozróżniane z uwagi na kolor.
Color differentiation of painted plastic components
Plastic parts should be color differentiated. For this purpose, a color sensor type SPECTRO-3-100-COF-d6.0-CL is used.
|
|
|
:
|
APP N° 542
Param.:
|
INI:
|
|
Rozróżnianie metalizowanych klamek drzwiowych Powinny być rozróżniane barwy metalizowanych klamek do drzwi.
Differentiation of metalized door handles
Metalized door handles should be color differentiated.
|
|
|
:
|
APP N° 541
|
Optyczna kontrola transmisji różnych płyt szklanych Powinna być sprawdzana optyczna przenikalność w różnych płytach szklanych.
Optical transmission control of different glass plates
The transmission of different glass plates should be controlled.
|
|
|
:
|
APP N° 540
Param.:
|
|
Kontrola zadymienia blach ze stali szlachetnej Powinna być kontrolowane zadymienie na powierzchniach ze stali szlachetnej.
Haze control of stainless steel plates
The haze of stainless steel surfaces should be controlled.
|
|
|
:
|
APP N° 539
|
Kontrola obecności fluoryzującego, płynnego kleju we wgłębieniu Powinna być kontrolowana obecność fluoryzującego, płynnego kleju w otworze
Presence control of liquid fluorescent glue in a hole
The presence of fluorescent liquid glue in a hole should be controlled.
|
|
|
:
|
APP N° 538
Param.:
|
INI:
|
|
Kontrola powierzchni tocznych w kołach zębatych Powierzchnia toczna w kołach zębatych powinna być kontrolowana z uwagi na wady powierzchniowe.
Control of the contact surface of gear wheels
The contact surface of gear wheels should be controlled.
|
|
|
:
|
APP N° 537
Param.:
|
INI:
|
|
Rozróżnianie barwy części plastykowych w obszarze wewnętrznym Komponenty tworzywa sztucznego w obszarze wewnętrznym powinny być rozróżniane z uwagi na kolor.
Color differentiation of interior plastic parts
Plastic parts, which are used in the automotive interior field, should be color differentiated
|
|
|
:
|
APP N° 536
Param.:
|
INI:
|
|
Kontrola obecności filmu silikonowego na części z tworzywa sztucznego Powinna być sprawdzana obecność warstwy silikonowej na komponentach plastykowych.
Detection of silicone oil film on plastic components
The presence of silicon oil should be controlled on the surface of plastic components.
|
|
|
:
|
APP N° 535
Param.:
|
INI:
|
|
Kontrola barwy pierścieni kolorowych na strzykawkach Kolor znaczników barwnych stosowany na strzykawkach powinien być kontrolowany.
Color mark control on syringes
The color of the mark on syringes should be controlled.
|
|
|
:
|
APP N° 534
Param.:
|
|
Rozróżnianie metalowych ogniw łańcucha Człony łańcucha powinny być rozróżniane z uwagi na grubość. Grubość jednej części wynosi przy tym 2,0 mm, podczas gdy druga część posiada grubość 2,3 mm.
Differentiation of metal chain links
Metal chain links should be differentiated by thickness. The thickness of the one size is 2.0mm, whereas the other size has a thickness of 2.3mm.
|
|
|
:
|
APP N° 533
Param.:
|
|
Detekcja znaczników karbowanych na taśmach metalowych Uszkodzone taśmy bimetalowe są oznaczane za pomocą znaczników karbowanych. Podczas dalszej obróbki znaczniki te muszą być dokładnie rozpoznawane, dzięki czemu uszkodzona część taśmy metalowej może zostać później usunięta.
Detection of chatter marks on metal bands
Defects inside bimetallic bands will be marked with chatter marks. These chatter marks should be proper detected during the further processing and the damaged part of the metal stripes should be removed from the finishing later on
|
|
APP N° 532
Param.:
|
INI:
|
|
Rozróżnianie komponentów wewnętrznych w przemyśle motoryzacyjnym Powinny być rozróżniane różne elementy ze skóry, Alcantara oraz tekstylne z obszaru wewnętrznego z uwagi na ich barwę i strukturę.
Differentiation of automotive interior parts
Interior parts used in the automotive industry should be differentiated
|
|
|
:
|
APP N° 531
Param.:
|
|
Detekcja holograficznych znaczników referencyjnych Powinny być rozpoznawane holograficzne znaczniki referencyjne. Należy przy tym przestrzegać, że zarówno zielone jak i czerwone znaczniki odbijające światło muszą być rejestrowane w takim samym ustawieniu.
Detection of holographical reference marks
Holographic reference marks should be detected. There are red as well as green reflecting reference marks which should be detected with the same adjustment.
|
|
|
:
|
APP N° 530
Param.:
|
|
Kontrola barwy szwów w skórze w obszarze wewnętrznym Powinny być rozpoznawane barwy szwów na różnych komponentach ze skóry.
Seam color detection on leather automotive interior components
The color of the seam on leather components should be controlled
|
|
|
:
|
APP N° 529
|
Pomiar barwy inline taśmy papierowej Podczas produkcji powinien następować pomiar barwy taśmy papierowej. Należy przy tym przestrzegać, żeby w otoczeniu, w którym następuje pomiar, panowała odpowiednio wysoka temperatura i wilgotność.
Inline color measurement of paper web
The color of a paper web should be measured inline. It has to be taken into account, that the ambient temperature as well as the humidity is very high at the place where the paper web should be color measured.
|
|
|
:
|
APP N° 528
Param.:
|
INI:
|
|
Rozróżnianie kolorów pasów bezpieczeństwa Pasy bezpieczeństwa powinny być rozróżniane z uwagi na ich kolor.
Color differentiation of safety seat belts
Seat belts should be color controlled and differentiated.
|
|
|
:
|
APP N° 527
|
Rozróżnienie połysku płytek podłogowych pokrytych i nie pokrytych powłoką Powinny być rozróżniane płytki podłogowe pokryte
i niepokryte powłoką.
Gloss differentiation of coated flagstones from uncoated flagstones
Coated flagstones should be differentiated from uncoated flagstones.
|
|
|
:
|
APP N° 526
Param.:
|
INI:
|
|
Rozróżnianie barwy imitacji skóry Imitacje skóry we wnętrzach samochodów wyprodukowanych w przemyśle motorazycyjnym powinny być rozróżniane pod względem barwy.
Color differentiation of leather imitations
Leather imitations in the interior automotive field should be color differentiated.
|
|
|
:
|
APP N° 525
Param.:
|
INI:
|
|
Rozróżnianie koloru osłon głośników Powinien być rozróżniany kolor obudów głośników.
Color differentiation of loudspeaker grids
The color of loudspeaker grids should be differentiated.
|
|
|
:
|
APP N° 524
Param.:
|
INI:
|
|
Odróżnianie połysku farby od czarnych komponentów wewnętrznych Czarne imitacje skóry we wnętrzu samochodu powinny być odróżniane od czarnych komponentów tekstylnych oraz gładkich czarnych części z tworzywa sztucznego.
Color-gloss differentiation of black interior parts
Black leather imitation components from the automotive interior field should be differentiated from black fabric as well as from black plain plastic parts.
|
|
|
:
|
APP N° 523
Param.:
|
INI:
|
|
Odróżnianie materiałów Alcantara i tekstylnych we wnętrzu Powinny być rozróżniane różnie ubarwione materiały Alcantara jak również tekstylne.
Differentiation of alcantara and fabric interior components
Different colored alcantara and fabric interior components for the automotive industry should be distinguished.
|
|
|
:
|
APP N° 522
Param.:
|
|
Pomiar koloru glazurowanych płytek ściennych Powinien być sprawdzany inline kolor glazurowanych płytek wykładzinowych.
Color measurement of glazed tiles
The color of glazed tiles should be inline measured.
|
|
|
:
|
APP N° 521
|
Pomiar połysku eloksalowanych blach aluminiowych Powinien być mierzony inline połysk różnych blach aluminiowych.
Gloss measurement of anodized guide rails
The gloss of anodized aluminum guide rails should be inline measured.
|
|
|
:
|
APP N° 520
Param.:
|
INI:
|
|
Pomiar barwy eloksalowanych profili aluminiowych Powinien być sprawdzany inline kolor eloksalowanych profili aluminiowych.
Color measurement of anodized aluminum stripes
The color of anodized aluminum stripes should be measured inline.
|
|
|
:
|
APP N° 519
|
Kontrola jakości przezroczystych, płasko-równoległych okien z tworzywa sztucznego Powinny być sprawdzanie przezroczyste płytki z tworzywa sztucznego z uwzględnieniem ich jakości optycznej. Przy tym powinny zostać wyselekcjonowane płytki z wadami optycznymi.
Quality control of transparent plastic plates
Transparent plastic plates should be quality controlled. The parts with a high optical quality should be differentiated from components with optical aberration failures.
|
|
|
:
|
APP N° 518
Param.:
|
INI:
|
|
Pomiar barwy granulatu z tworzywa sztucznego przeznaczonego do recyklingu Powinna być sprawdzana barwa granulatu przeznaczona do ponownego przetworzenia. Należy przy tym zwrócić uwagę, że położenie pojedynczych ziaren granulatu za wziernikiem może się zmieniać i w tym przypadku duże pole pomiaru byłoby korzystne, aby uzyskać wynik najbardziej zbliżony do wartości średniej koloru. Następnie należy przestrzegać, że w pobliżu wziernika panują temperatury zbliżone do 120°C.
Color measurement of recycled plastic pellets
The color of recycled plastic pellets should be measured. It has to be taken into account, that the position of the pellets behind the inspection glass can vary, thus a big light spot has a certain advantage to get a proper average measurement value. Furthermore, it should be considered, that the ambient temperature around the inspection glass can reach 120°C.
|
|
|
:
|
APP N° 517
Param.:
|
INI:
|
|
Kontrola koncentracji pasywatora w roztworze Powinna być kontrolowana ilość pasywatora w roztworze.
Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
|
|
|
:
|
APP N° 516
Param.:
|
INI:
|
|
Kontrola obecności nici fluoryzujących w pieluszce w trakcie produkcji Powinna być sprawdzana obecność nici fluoryzujących w pieluszkach podczas ich wytwarzania.
Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
|
|
|
:
|
APP N° 515
Param.:
|
INI:
|
|
Kontrola powłoki na stronie czołowej w kondensatorach foliowych Powinna być sprawdzana strona czołowa kondensatorów foliowych z uwzględnieniem obecności podwójnej powłoki.
Coating control at the front side of film capacitors
The double coating at the front side of film capacitors should be controlled.
|
|
|
:
|
APP N° 514
Param.:
|
INI:
|
|
Kontrola masy zalewowej w korpusach kondensatorów Powinno być kontrolowane prawidłowe pokrycie materiału kondensatora masą zalewową.
Casting compound control at capacitor housings
The casting compound of capacitor housings should be controlled.
|
|
|
:
|
APP N° 513
Param.:
|
INI:
|
|
Wykrywanie znaczników barwnych w pojemnikach z tworzywa sztucznego Powinien być wykrywany zielony znacznik barwny na ryflowanym tle białego pojemnika z tworzywa sztucznego. Należy przy tym zwrócić uwagę na to, że zielone zaznaczenie może częściowo już nie istnieć.
Color mark detection on a plastic cartridge
A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched.
|
|
|
:
|
APP N° 512
Param.:
|
INI:
|
|
Kontrola istnienia otworów w wężu cewnika Powinno być sprawdzane istnienie otworów w cewnikach.
Hole presence control on catheter tubes
The presence of holes on catheter tubes should be controlled.
|
|
|
:
|
APP N° 511
Param.:
|
INI:
|
|
Kontrola istnienia zaokrąglenia w cewniku Powinno być sprawdzane istnienie zaokrąglenia w cewniku.
Catheter dome presence control
The presence of a dome at the end of a catheter should be controlled.
|
|
|
:
|
APP N° 510
|
Pomiar stopnia połysku w półprzezroczystych foliach z tworzywa sztucznego Powinien być mierzony inline stopień połysku w foliach z tworzywa sztucznego przepuszczających światło.
Gloss measurement of translucent plastic films
The gloss level of semi-transparent plastic films should be inline measured.
|
|
|
:
|
APP N° 509
|
Rozróżnianie koloru podstawek z tworzywa sztucznego w uchwytach na napoje Powinny być odróżnianie czarne podstawki z tworzywa sztucznego od ciemno-brązowych w stanie już zamontowanym.
Color differentiation of flaps in cup holders
Black flaps should be color differentiated from dark brown flaps. During the tests the flaps are already integrated into the cup holder.
|
|
|
:
|
APP N° 508
|
Rozpoznawanie rowków w amortyzatorach Powinna być sprawdzana obecność błyszczącego rowka w amortyzatorze.
Notch presence detection on a shock absorber
A notch on a metal shock absorber should be detected. It has to be taken into account, that the notch is very shiny.
|
|
|
:
|
APP N° 507
Param.:
|
INI:
|
|
Rozróżnianie koloru i struktury komponentów wewnętrznych w przemyśle motoryzacyjnym W praktyce można uzyskać bezbłędne rozróżnienie najczęściej stosowanych komponentach wewnętrznych za pomocą odróżniania połysku i barwy. Okazało się jednak, że zwłaszcza przy odróżnianiu między materiałami Alcantara na jednej stronie a materiałami tekstylnymi na drugiej różnice nie są wystarczająco duże, tak że komponenty z uwagi na strukturę muszą być dodatkowo badane.
Color and structure differentiation of automotive interior components
In practice, a proper color-gloss differentiation between most of the interior components can be realized, however, it has to be taken into account, that the difference in gloss as well as in color between the fabrics and the alcantara components is small, thus the structure difference should be used to differentiate even those products.
|
|
|
:
|
APP N° 506
Param.:
|
INI:
|
|
Rozróżnianie barwy lakierowanych części plastykowych Powinny być rozróżniane kolory lakierowanych komponentów z tworzywa sztucznego, jeśli znajdują zastosowanie we wewnętrzu samochodu.
Color differentiation of painted plastic components
Painted plastic components used for the interior automotive area should be color differentiated.
|
|
|
:
|
APP N° 505
Param.:
|
INI:
|
|
Kontrola obecności grawerunku laserowego na butelce szklanej Powinna być sprawdzana obecność oraz wyrazistość grawerunku laserowego na szyjce butelki szklanej.
Presence control of a laser engraving on a glass bottle
The presence as well as the intensity of a laser engraving on glass bottles should be controlled.
|
|
|
:
|
APP N° 504
Param.:
|
|
Kontrola grubości ścianek części plastykowych Powinna być ustalana grubość ścianek części z tworzywa sztucznego. Należy przy tym uwzględniać, żeby przepuszczalność światła części z tworzywa sztucznego korelowała z ich grubością ścianek.
Wall thickness control of semitransparent plastic components
The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts.
|
|
|
:
|
APP N° 503
Param.:
|
|
Kontrola wysokości płyt kamiennych Powinna być kontrolowana grubość płyt kamiennych podczas transportu na przenośniku taśmowym. Odchyłki wysokości wymagane przez przenośnik taśmowy, mogą być na początku pomijane, ponieważ mogą służyć do celów referencyjnych.
Stone plate thickness control
The thickness of stone plates should be measured. At this, the stone plates will be transported on a conveyor belt with a negligible movement in height, thus it can be used as a reference.
|
|
|
:
|
APP N° 502
Param.:
|
INI:
|
|
Kontrola obecności półprzezroczystego filmu z tworzywa sztucznego na blasze metalowej Powinno być kontrolowane niebieskawe, półprzezroczyste pasmo plastikowe na blasze metalowej.
Presence control of a semitransparent plastic film on a metal sheet
A semitransparent light blue plastic film should be detected on a metal sheet.
|
|
|
:
|
APP N° 501
Param.:
|
INI:
|
|
Rozróżnianie barwy półskorup łożysk ślizgowych Półskorupy łożysk ślizgowych powinny być rozróżniane
z uwagi na kolor.
Color differentiation of half shells of bush bearings
Half shells of friction-type bearings should be color differentiated.
|
|
|
:
|
APP N° 500
Param.:
|
INI:
|
|
Kontrola obecności farby podkładowej na ramach metalowych lakierowanych na czarno Powinna być rozpoznawana obecność farby podkładowej naniesionej na ramy metalowe lakierowane następnie na czarno.
Primer presence control on a black painted metal frame
The presence of a primer should be detected on a black painted metal frame.
|
|
|
:
|
APP N° 499
Param.:
|
INI:
|
|
Kontrola barwy LED w komponentach wewnętrznych Powinien być kontrolowany kolor oraz intensywność światła LED w wewnętrznych komponentach z tworzywa sztucznego. Następnie komponenty, w których nie istnieją żadne LED, należy odpytywać, czy obecna jest w nich płytka osłonowa.
LED color control on interior components
The color as well as the intensity of LEDs, integrated in interior components, should be controlled. Furthermore, on components without LEDs the presence of a cover plate should be checked.
|
|
|
:
|
APP N° 498
Param.:
|
INI:
|
|
Kontrola barwy obrączek metalowych Jakość obrączek metalowych powinna być kontrolowana
z uwagi na kolor.
Color control of metal rings
The quality of metal rings should be controlled with a view to the color.
|
|
|
:
|
APP N° 497
Param.:
|
INI:
|
|
Rozróżnianie kolorów metalowych obudów głośników Powinny być rozróżniane kolory dwóch różnych typów metalowych obudów głośników.
Color differentiation of metal loudspeaker grids
Two kinds of metal loudspeaker grids should be color differentiated.
|
|
|
:
|
APP N° 496
Param.:
|
INI:
|
|
Kontrola obecności oleju na siatkach metalowych Powinna być kontrolowana obecność oleju na siatkach metalowych.
Oil presence control on metal grids
The presence of oil should be detected on metal grids.
|
|
|
:
|
APP N° 495
|
Pomiar połysku na impregnowanych materiałach tekstylnych Powinien być mierzony współczynnik połysku na powierzchniach materiałów tekstylnych pokrytych impregnatem.
Gloss measurement on coated textiles
The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value.
|
|
|
:
|
APP N° 494
Param.:
|
INI:
|
|
Kontrola koloru T-Shirt w przezroczystej folii po zgrzaniu Powinien być kontrolowany kolor produktów T-Shirt, które zapakowane są w przezroczyste folie.
Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
|
|
|
:
|
APP N° 493
Param.:
|
INI:
|
|
Detekcja zjawiska fluorescencji na foliach metalowych Należy sprawdzać obecność warstwy fluoryzującej na powierzchniach folii metalowych.
Fluorescence detection on metal foils
The presence of fluorescence coating on a metal foil should be controlled.
|
|
|
:
|
APP N° 492
|
Rozpoznawanie punktu na szklanej butelce Podczas obrotu powinny być rejestrowane punkty znajdujące się na butelce szklanej.
Dot detection on glass bottles
Dots on glass bottles should be detected during the rotation.
|
|
|
:
|
APP N° 491
Param.:
|
|
Pomiar wysokości przezroczystych płyt z tworzywa sztucznego ze zintegrowaną tkaniną Powinna być mierzona wysokość przezroczystych płyt
z tworzywa sztucznego z wtopioną tkaniną z materiału.
Height measurement of a transparent plastic plate with embedded fabric
The height of transparent plastic plate with different embedded fabric should be measured.
|
|
|
:
|
APP N° 490
|
Pomiar grubości polerowanych płyt kamiennych Powinna być ustalana grubość płyt kamiennych. Należy przy tym zwracać uwagę, aby płyty kamienne były transportowane na dodatkowej płycie referencyjnej.
Thickness measurement of polished slabs
The thickness of polished slabs should be measured. It should be noted, that the slabs are placed on a reference plate.
|
|
|
:
|
APP N° 489
Param.:
|
|
Kontrola połysku polerowanych płyt kamiennych Powinien być rejestrowany połysk polerowanych płyt kamiennych.
Gloss measurement on polished slabs
The gloss of polished slabs should be measured.
|
|
|
:
|
APP N° 488
|
Kontrola barwy polerowanych płyt kamiennych Powinna być zapisywana barwa polerowanych płyt kamiennych.
Color control of polished slabs
The color of polished slabs should be controlled.
|
|
|
:
|
APP N° 487
Param.:
|
INI:
|
|
Pomiar barwy granulatu z tworzywa sztucznego Podczas produkcji powinien następować pomiar barwy granulatu z tworzywa sztucznego.
Color measurement of plastic pellets
The color of plastic pellets should be measured during the production.
|
|
|
:
|
APP N° 486
Param.:
|
INI:
|
|
Pomiar znaczników barwnych w różnych materiałach tekstylnych Powinny być mierzone wartości L*a*b* znaczników barwnych w różnych materiałach tekstylnych.
Color mark measurement on fabric
The L*a*b* values of color marks on different fabric should be determined.
|
|
|
:
|
APP N° 485
Param.:
|
INI:
|
|
Kontrola pozycji nici w procesie nawijania na szpuli Podczas procesu nawijania na szpulę powinna być kontrolowana pozycja nici tekstylnej.
Winding control of yarn on a pirn
During the winding of yarn, the correct winding should be controlled.
|
|
|
:
|
APP N° 484
Param.:
|
|
Pomiar wielkości cząstek w strumieniu rozpylanej cieczy Powinna być określana wielkość cząstek w strumieniu rozpylanej cieczy.
Particle size measurement in a spray jet
The size of particles in a spray jet should be measured.
|
|
|
:
|
APP N° 483
Param.:
|
|
Kontrola strumienia rozpylanej cieczy w trakcie ruchu Powinien być kontrolowany strumień cieczy rozpylanej z dyszy w trakcie ruchu.
Spray jet control during the movement
The spray jet of a spray nozzle should be controlled during the movement.
|
|
|
:
|
APP N° 482
Param.:
|
INI:
|
|
Pomiar barwy blach lakierowanych Powinna być ustalana barwa blach lakierowanych (wartość L*a*b*).
Color measurement of lacquered metal sheets
The color of painted metal sheets should be measured (L*a*b* values).
|
|
|
:
|
APP N° 481
Param.:
|
INI:
|
|
Rozróżnianie barwy trzpieni z tworzywa sztucznego Trzpienie z tworzywa sztucznego powinny być rozróżniane z uwagi na kolor.
Color differentiation of plastic pen housings
The color of plastic bushings should be controlled.
|
|
|
:
|
APP N° 480
Param.:
|
INI:
|
|
Kontrola prawidłowości pozycji trzpieni metalowych Części obrotowe ze stali powinny być kontrolowane
z uwagi na prawidłowość ich położenia.
Direction control of metal pins
The direction of metal pins should be controlled.
|
|
|
:
|
APP N° 479
Param.:
|
INI:
|
|
Rozróżnianie barwy jasnych osłon zamykających pasów bezpieczeństwa Barwy jasnych osłon zamykających pasów bezpieczeństwa powinny być rozróżniane.
Color differentiation of bright seat belt plastic housings
Bright seat belt plastic housings should be color differentiated.
|
|
|
:
|
APP N° 478
Param.:
|
INI:
|
|
Rozróżnianie barw beżowych osłon zamykających pasów bezpieczeństwa z tworzywa sztucznego Powinny być rozróżniane beżowe i jasnobeżowe osłony zamykające pasów bezpieczeństwa.
Color differentiation of beige seat belt plastic housings
Beige colored seat belt plastic housings should be differentiated.
|
|
|
:
|
APP N° 477
Param.:
|
INI:
|
|
Rozróżnianie barwy ciemnych osłon zamykających pasów bezpieczeństwa Osłony zamykające pasów bezpieczeństwa powinny być rozróżniane z uwagi na kolor. Chodzi w tym przypadku o bardzo ciemne części plastykowe, które posiadają po pierwsze lekkie czerwonawe i po drugie lekkie niebieskawe odchyłki.
Color differentiation of dark seat belt plastic housings
Dark seat belt housings should be differentiated.
|
|
|
:
|
APP N° 476
Param.:
|
INI:
|
|
Rozróżnianie barw części z tworzywa sztucznego wewnątrz w przemyśle motoryzacyjnym Barwy wewnętrznych komponentów plastykowych powinny być rozróżniane.
Color differentiation of plastic interior components for the automotive industry
Plastic components used for the automotive interior field should be color differentiated.
|
|
|
:
|
APP N° 475
Param.:
|
INI:
|
|
Rozróżnianie tulejek aluminiowych lakierowanych wewnątrz jedno- i dwukrotnie Powinny być rozróżniane tulejki aluminiowe lakierowane wewnątrz jednokrotnie od tulejek lakierowanych dwukrotnie.
Differentiation of single and double inside coated aluminum tubes
Single inside coated aluminum tubes should be differentiated from double inside coated aluminum tubes.
|
|
|
:
|
APP N° 474
Param.:
|
INI:
|
|
Rozpoznawanie oleju fluoryzującego na różnych podkładkach uszczelniających Powinna być kontrolowana obecność oleju na podkładkach uszczelniających. Należy przy tym zwracać uwagę, żeby olej był wykrywalny w świetle UV.
Detection of fluorescent oil on flat washers
The presence of oil on different flat washers should be controlled. It has to be taken into account, that the oil is fluorescent, if UV light is used.
|
|
|
:
|
APP N° 473
Param.:
|
|
Rozpoznawanie fluoryzujących środków smarowych na trzpieniach metalowych Powinna być wykrywana obecność fluoryzującej warstwy środka smarowego w świetle promieniowania UV.
Detection of fluorescent lubricant on metal pins
Fluorescent lubricant should be detected on metal pins.
|
|
|
:
|
APP N° 472
|
Rozróżnianie barwy rurek z tworzywa sztucznego Rurki z tworzywa sztucznego powinny być rozróżniane z uwagi na kolor.
Color differentiation of small plastic tubes
Small violet plastic tubes should be color differentiated.
|
|
|
:
|
APP N° 471
Param.:
|
|
Rozróżnianie barwy małych szczotek z tworzywa sztucznego Małe szczotki z tworzywa sztucznego powinny być rozróżniane z uwagi na kolor.
Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
|
|
|
:
|
APP N° 470
|
Pomiar barwy dachówek Powinien być sprawdzany inline kolor dachówek.
Roof tile color measurement
The color of roof tiles should be inline measured.
|
|
|
:
|
APP N° 469
|
Rozpoznawanie warstwy absorbującej promieniowanie UV na przezroczystej butelce Powinno następować niezawodne rozpoznawanie obecności warstwy absorbującej promieniowanie UV na przezroczystej butelce.
Detection of an UV blocking layer on transparent glass bottles
The presence of an UV blocking layer should be detected on transparent glass bottles.
|
|
|
:
|
APP N° 468
|
Rozróżnianie barwy lakierowanych części z tworzywa sztucznego Barwy lakierowanych części z tworzywa sztucznego powinny być rozróżniane. Na wynik pomiaru nie może mieć wpływu kierunek obrotu (wokół prostopadłej do powierzchni).
Color differentiation of lacquered plastic components
Car finish should be color differentiated. A rotation around the perpendicular axis of the plastic components should not influence the result of the color control.
|
|
|
:
|
APP N° 467
|
Rozróżnianie barwy klamek samochodowych Powinna być rozróżniana barwa klamek samochodowych. Należy przy tym zwracać uwagę, żeby powierzchnia lakierowana posiadała wysoki połysk.
Color differentiation of car door handles
Car door handles should be color differentiated. It has to be taken into account, that the door handles are very shiny.
|
|
|
:
|
APP N° 466
Param.:
|
INI:
|
|
Kontrola obecności półokrągłego wytłoczenia w nosku wytłaczanej części Powinna być kontrolowana obecność wytłoczenia w nosku wytłaczanej części. Następnie powinno być sprawdzane, czy jest to karb półokrągły, czy wydłużony.
Presence control of a notch in a lobe of a metal stamping part
The presence of a notch in a lobe of a metal stamping part should be detected. Furthermore a semicircular notch must be differentiated from an elongated notch.
|
|
|
:
|
APP N° 465
Param.:
|
INI:
|
|
Pomiar barwy kabli izolowanych Powinien być sprawdzany inline kolor izolacji przewodów elektrycznych.
Color measurement of the insulation of cables
The color of the insulation of electrical cables should be inline measured.
|
|
|
:
|
APP N° 464
Param.:
|
|
Kontrola ilości cieczy rozpylanej w strefach zagrożonych eksplozją Powinna być sprawdzana możliwość rozpylania jak również ilość rozpylanej cieczy w strefach zagrożonych eksplozją. Należy przy tym wziąć pod uwagę, że podczas tego procesu nie jest możliwa kontrola światła przechodzącego.
Spray jet amount control in the Ɛx range
The presence as well as the spray amount of a spray jet in the Ex range should be controlled. It has to be taken into account, that a system based on the transmitted light mode cannot be used for this application.
|
|
|
:
|
APP N° 463
Param.:
|
INI:
|
|
Kontrola obecności oleju w nakrętkach i śrubach Obecność oleju w nakrętkach i śrubach powinna być sprawdzana bezpośrednio przed zaginaniem krawędzi.
Oil presence control in metal screw nuts and screws
The presence and amount of oil in a screw nut as well as in a screw should be detected directly before border crimping.
|
|
|
:
|
APP N° 462
|
Liczenie złożonych torebek papierowych Złożone torebki papierowe, które transportowane będą na przenośniku taśmowym, powinny być liczone.
Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.
|
|
|
:
|
APP N° 461
Param.:
|
INI:
|
|
Kontrola barwy czerwonego paska na pasie bezpieczeństwa Powinien być sprawdzany kolor czerwonego paska na pasie bezpieczeństwa. Barwa czerwieni musi znajdować się w określonym polu tolerancji.
Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
|
|
|
:
|
APP N° 460
Param.:
|
|
Kontrola przejścia materiału o grubym splocie do splotu drobnego W materiale tekstylnym powinna być kontrolowana pozycja przejścia ze splotu grubego do drobnego.
Edge position detection on fabric
The position of the changeover from rough to fine on a textile should be detected.
|
|
|
:
|
APP N° 459
Param.:
|
INI:
|
|
Rozróżnianie odwrotnej strony pierścienia plastykowego od strony przedniej Powinno być kontrolowane położenie (strona przednia na górze - na dole) pierścieni z tworzywa sztucznego, które mają być transportowane na przenośniku taśmowym.
Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
|
|
|
:
|
APP N° 458
Param.:
|
INI:
|
|
Rozpoznawanie miejsca rozdziału na taśmie Fleece z tworzywa sztucznego Powinno zostać wykryte miejsce rozdziału na taśmie plastykowej Fleece. Należy przy tym zwracać uwagę, żeby zarówno miejsce rozdziału jak i materiał Fleece były białe, by nie powstawała różnica barw.
Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
|
|
|
:
|
APP N° 457
|
Rozpoznawanie położenia warstwy silikonowej na przezroczystej taśmie klejącej Powinno zostać wykryte położenie warstwy silikonowej na przezroczystym filmie z tworzywa sztucznego (rozpoznanie na stronie przedniej i odwrotnej taśmy).
Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
|
|
|
:
|
APP N° 456
|
Rozpoznawanie kleju na gwincie śruby Powinna być kontrolowana obecność oraz ilość kleju fluoryzującego (fluoryzacja występuje przy promieniowaniu UV) na gwincie śruby.
Glue detection on the thread of a screw
The presence and amount of fluorescent (fluorescent under the influence of UV light) glue on the thread of a screw should be detected.
|
|
|
:
|
APP N° 455
Param.:
|
INI:
|
|
Rozpoznawanie szwu w skórze i w imitacji skóry Beżowe (czarne) szwy powinny być rozpoznawane na beżowej (czarnej) skórze lub na jej imitacji.
Seam detection on leather and leather imitations
Beige (black) stitching should be detected on beige (black) leather or leather imitations.
|
|
|
:
|
APP N° 454
|
Rozróżnianie między skórą a imitacją skóry Skóra i jej imitacja powinny odróżniać się we wnętrzu od siebie w sposób jednoznaczny.
Differentiation of leather and leather imitations
Leather and leather imitations used in the interior field should be proper differentiated.
|
|
|
:
|
APP N° 453
Param.:
|
INI:
|
|
Pomiar długości płyty gipsowo-kartonowej Powinna zostać zmierzona długość płyty gipsowo-kartonowej.
Measurement of the length of gypsum plasterboard
The length of gypsum plasterboard should be measured.
|
|
|
:
|
APP N° 452
Param.:
|
|
Kontrola położenia pierścieni stalowych Należy sprawdzić obecność jednego lub dwóch pierścieni stalowych.
Double ring control
The presence of one or two rings should be controlled.
|
|
|
:
|
APP N° 451
|
Kontrola położenia korka gumowego bezpośrednio przed wprowadzeniem do strzykawki Powinna zostać sprawdzona prawidłowość położenia korka gumowego przed zamknięciem strzykawki.
Position monitoring of a rubber plug before the final positioning in a syringe
The position of a rubber plug should be controlled with regard to the outer face and inner surface.
|
|
|
:
|
APP N° 450
|
Kontrola barwy światła odbitego w pokryciach szklanych Pokrycia szklane powinny być badane metodą światła odbitego biorąc pod uwagę paletę kolorów.
Reflected light color control of coatings on glass plates
The coating of glass plates should be color controlled in the reflected light mode.
|
|
|
:
|
APP N° 449
|
Kontrola barwy światła przechodzącego w pokryciach szklanych Pokrycia szklane powinny być badane metodą światła przechodzącego z uwzględnieniem palety kolorów.
Transmitted light color control of coatings on glass plates
The coating of glass plates should be color controlled in the through beam way.
|
|
|
:
|
APP N° 448
Param.:
|
INI:
|
|
Detekcja szwów spawanych w rurkach wewnętrznych Powinna być rejestrowane umiejscowienie szwu spawanego.
Detection of the welding line in the core retainer
The position of the welding line should be detected in inner pipes.
|
|
|
:
|
APP N° 447
Param.:
|
INI:
|
|
Rozróżnianie barwy kapturków plastykowych do strzykawek Kapturki plastykowe, które stosowane są do strzykawek szklanych powinny być kontrolowane. Należy przy tym zwracać uwagę, żeby kapturki plastykowe były lekko przezroczyste i jednocześnie posiadały błyszczącą powierzchnię.
Color differentiation of plastic caps for syringes
Plastic caps used for syringes should be color controlled. It has to be taken into account, that the plastic caps are semitransparent and the surface is very glossy.
|
|
|
:
|
APP N° 446
Param.:
|
|
Kontrola strumienia rozpylanej cieczy w świetle odbitym Powinna być przeprowadzana kontrola strumienia rozpylanej cieczy w świetle odbitym, co należy stosować w strefach zagrożonych wybuchem.
Spray jet control with reflected light
The spray jet should be controlled with reflected infrared light and in an Ɛx zone environment.
|
|
|
:
|
APP N° 445
Param.:
|
INI:
|
|
Kontrola barwy frytek Powinna być sprawdzana barwa frytek.
Color control of fried potato chips
The color of fried potato chips should be controlled.
|
|
|
:
|
APP N° 444
Param.:
|
INI:
|
|
Kontrola wartości szarości płyt sitodrukowych z tworzywa sztucznego Powinna być kontrolowana wartość szarości płyt sitodrukowych z tworzywa sztucznego.
Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
|
|
|
:
|
APP N° 443
Param.:
|
INI:
|
|
Kontrola koloru znaczników barwnych sitodruku Kolor znaczników barwnych sitodruku powinien być kontrolowany na płytach z tworzywa sztucznego.
Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
|
|
|
:
|
APP N° 442
Param.:
|
INI:
|
|
Kontrola koloru lakierów do paznokci Powinien być sprawdzany kolor lakierów do paznokci. Należy przy tym uwzględniać, że barwa lakierów do paznokci powinna być rozróżniana w stanie napełnionym przez przezroczyste szkło
Color control of nail polishes
The color of nail varnishes should be controlled. It has to be taken into account that the nail lacquers should be checked through transparent glass bottles.
|
|
|
:
|
APP N° 441
Param.:
|
|
Rozróżnianie kolorów szminek Powinien być kontrolowany kolor szminek.
Color differentiation of make-up
The color of make-up should be controlled.
|
|
|
:
|
APP N° 440
Param.:
|
INI:
|
|
Rozróżnianie kolorów cieni do powiek Powinien być kontrolowany kolor cieni do powiek.
Color differentiation of eye shadows
The color of eye shadows should be controlled.
|
|
|
:
|
APP N° 439
Param.:
|
INI:
|
|
Rozróżnianie kolorów pomadek do ust Powinien być kontrolowany kolor pomadek do ust.
Color differentiation of lipsticks
The color of lipsticks should be controlled.
|
|
|
:
|
APP N° 438
Param.:
|
|
Kontrola średnicy drutów metalowych Powinna być mierzona średnica różnych drutów metalowych
i powinny one zostać następnie posegregowane.
Diameter control of metal wires
The diameter of metal wires should be controlled and the wires should be differentiated.
|
|
|
:
|
APP N° 437
Param.:
|
INI:
|
|
Rozróżnianie między ażurami z powłoką cynową a srebrną Powinny zostać oddzielone ażury pokryte warstwą cyny od ażurów z powłoką srebrną.
Color differentiation of tin and silver plated stamping stripes
Tin plated stamping stripes should be distinguished from silver plated stamping stripes.
|
|
|
:
|
APP N° 436
Param.:
|
|
Ustalenie pozycji filtrów papierosowych Pozycja filtrów do papierosów powinna zostać zarejestrowana w sposób precyzyjny i przy dużej prędkości obiektywu wynoszącej kilka m/s.
Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.
|
|
|
:
|
APP N° 435
|
Pomiar grubości cienkiej warstwy na przezroczystej folii z tworzywa sztucznego Powinna zostać ustalona grubość cienkiej warstwy na optycznie przezroczystym podłożu. Proponuje się pomiar transmisji, ponieważ intensywność może zostać zastosowana do obliczenia grubości warstwy.
Thickness control of a thin layer on a transparent plastic film
The thickness of a thin layer on a transparent plastic film should be measured. To measure the transmission with a through beam system seems to be an adequate method to determine the thickness of a thin layer.
|
|
|
:
|
APP N° 434
Param.:
|
INI:
|
|
Kontrola nieprzezroczystości optycznie półprzepuszczalnych płyt z tworzywa sztucznego Optycznie półprzepuszczalne płyty z tworzywa sztucznego powinny być badane ze względu na zmętnienie.
Haze control of semi transparent plastic plates
Semi transparent plastic plates should be controlled with a view to the opacity.
|
|
|
:
|
APP N° 433
Param.:
|
INI:
|
|
Rozróżnianie barwy kołpaków zamykających z tworzywa sztucznego Pokrywki plastykowe stosowane do pojemników do płynów do picia, powinny być rozdzielane według barwy. Należy przy tym zwracać uwagę na to, żeby pokrywki intensywnie błyszczały.
Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.
|
|
|
:
|
APP N° 432
Param.:
|
|
Rozróżnianie barwy lakierowanych listew ozdobnych Listwy ozdobne powinny być kontrolowane z uwagi na kolor. Należy przy tym zwracać uwagę, żeby listwy ozdobne przez zastosowanie lakieru ochronnego posiadały intensywny połysk.
Color differentiation of lacquered trims
Trim strips should be color differentiated. It has to be taken into account, that the lacquered trims are very shiny.
|
|
|
:
|
APP N° 431
|
Kontrola jakości wkładów Powinna być sprawdzana jakość wkładów do drukarek laserowych. Można przy tym stwierdzić, że przy wzrastającym wykorzystywaniu wkładu ulega pogorszeniu reflektywność powierzchni wewnętrznej wkładu.
Quality control of cartridges
The quality of cartridges should be controlled. It has to be taken into account, that the reflectivity of the surface of the cartridges will be decreased with the increase of the usage of the cartridges.
|
|
|
:
|
APP N° 430
|
Kontrola barwy i zmętnienia kamieni ozdobnych Powinna być kontrolowana przezroczystość oraz barwa kamieni szlachetnych.
Color and opacity control of gemstones
The color as well as the opacity of gemstones should be controlled.
|
|
|
:
|
APP N° 429
Param.:
|
INI:
|
|
Rozróżnienie koloru nici woskowanych Barwy nici woskowanych powinny być rozróżniane. Należy przy tym zwracać uwagę, żeby nici dzięki zastosowaniu wosku posiadały intensywny połysk.
Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
|
|
|
:
|
APP N° 428
Param.:
|
INI:
|
|
Rozróżnianie ocynkowanych od nieocynkowanych części obrotowych ze stali Ocynkowane części obrotowe ze stali powinny być odróżniane od części nieocynkowanych.
Differentiation of zinc plated steel parts and raw steel parts
Zinc plated steel turned parts should be differentiated from raw steel turned parts.
|
|
|
:
|
APP N° 427
|
Kontrola koloru i orientacji kapsli W trakcie produkcji bezpośrednio przed zapakowaniem należy kontrolować kolor i orientację kapsli.
Color and guidance control of capsules
The color as well as the orientation of capsules should be controlled during the production and just before packaging.
|
|
|
:
|
APP N° 426
|
Kontrola barwy materiałów tekstylnych Powinien być sprawdzany inline kolor taśm tekstylnych.
Detection of color on fabric
The color of different colored fabric should be inline controlled.
|
|
|
:
|
APP N° 425
|
Kontrola obecności filmu olejowego w korpusie aluminiowym W korpusie aluminiowym należy sprawdzać, czy powierzchnia wewnętrzna jest zwilżona filmem olejowym.
Presence control of an oil film on an aluminum surface
The presence of an oil film in aluminum housing should be controlled.
|
|
|
:
|
APP N° 424
|
Kontrola obecności kropli oleju na powierzchni stalowej Należy sprawdzać obecność (jednej) kropli oleju na powierzchni stalowej.
Oil drop presence control on a steel surface
The presence of an oil drop on a steel surface should be controlled.
|
|
|
:
|
APP N° 423
|
Kontrola podwójnych warstw w membranach w płytkach bezpieczeństwa W każdej płytce bezpieczeństwa należy sprawdzić, czy znajduje się w niej jedna lub omyłkowo dwie membrany. Należy przy tym zwrócić uwagę na to, że mogą być stosowane różne materiały na płytki bezpieczeństwa (miedź lub aluminium) i także na membrany (folia aluminiowa lub stalowa).
Double membrane control on breaker plates
The presence of one or two diaphragms in a blow-out disk should be differentiated. At this, different types of burst disks are available (copper and aluminum) with different diaphragms (aluminum membrane or steel membrane).
|
|
|
:
|
APP N° 422
|
Kontrola obecności pierścienia silikonowego na elemencie z tworzywa sztucznego Na części wykonanej z tworzywa sztucznego powinna być sprawdzana obecność pierścienia silikonowego.
Presence control of a seal ring on a plastic component
The presence of a silicon ring on a plastic component should be controlled.
|
|
|
:
|
APP N° 421
|
Rozpoznawanie fluoryzującej warstwy klejącej na osłonie plastykowej Na osłonie plastykowej przez promieniowanie UV powinna być rozpoznawana fluoryzująca warstwa klejąca. Należy przy tym przestrzegać, żeby warstwa klejąca była pokryta przezroczystą taśmą z tworzywa sztucznego.
Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.
|
|
|
:
|
APP N° 420
|
Rozpoznawanie warstwy klejącej na osłonie plastykowej Na osłonie z tworzywa sztucznego powinna być rozpoznawana warstwa klejąca. Warstwa klejąca powoduje powstanie określonej falistości folii z tworzywa sztucznego na przeciwległej stronie. Ponieważ strona klejąca jest przykryta metaliczną folią o wysokim połysku, należy koniecznie sprawdzić stronę odwrotną.
Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.
|
|
|
:
|
APP N° 419
|
Odróżnianie Alcantara od materiału tekstylnego w strefie wnętrza Obicie Alcantara powinno różnić się od obicia tekstylnego.
Differentiation Alcantara (Ultrasuede) and fabric interior equipment
Alcantara and fabric interior equipment should be differentiated.
|
|
|
:
|
APP N° 418
|
Rozróżnianie granulatów z tworzywa sztucznego Granulaty z tworzywa sztucznego różniące się chemicznie oraz barwą powinny zostać wzajemnie rozdzielone.
Differentiation of plastic pellets
Chemically and in terms of color different plastic pellets should be distinguished.
|
|
|
:
|
APP N° 417
|
Detekcja etykiet fluoryzujących Przy promieniowaniu UV powinny być wykrywane etykiety fluoryzujące oraz odstępy między nimi.
Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
|
|
|
:
|
APP N° 416
|
Kontrola obecności przędzy w chwycie z tworzywa sztucznego na wrzecionie W chwycie z tworzywa sztucznego powinna być sprawdzana obecność przędzy na wrzecionie.
Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
|
|
|
:
|
APP N° 415
|
Kontrola kierunku prętów metalowych Pręty metalowe powinny być kontrolowane z uwagi na prawidłowość ich położenia. Jeden koniec pręta jest zaciśnięty na płasko, podczas gdy drugi jest okrągły.
Direction control of a metal rod
The direction of a metal rot should be controlled. At this, the metal rod is flat press formed at the one side and at the other end round in shape.
|
|
|
:
|
APP N° 414
|
Kontrola częstotliwości wentylatorów przemysłowych Częstotliwość oraz kierunek obrotów wentylatorów powinny być kontrolowane. W tym celu należy umieścić na jednej z łopatek wirnika naklejkę fluoryzującą wrażliwą na światło ultrafioletowe.
Frequency control of industrial ventilators
The frequency as well as the direction of rotation of industrial ventilators should be controlled. At this, on one of the blades of the ventilator a fluorescent label is glued on.
|
|
|
:
|
APP N° 413
|
Kontrola położenia drutów metalowych na przezroczystej folii z tworzywa sztucznego Na przezroczystej folii należy sprawdzić, czy druty metalowe znajdują się na przedniej, ale także i na tylnej strony folii.
Position monitoring of metal wires on a transparent plastic layer
The back side / front side position of metal wires on a transparent plastic film should be controlled.
|
|
|
:
|
APP N° 412
|
Wykrywanie i liczenie fałd w mieszku sprężystym W różnych materiałach na mieszki sprężyste powinna zostać ustalana liczba fałd.
Edge detection at bellows (fold counting)
On bellows the edges should be detected and counted.
|
|
|
:
|
APP N° 411
|
Odróżnianie typów sprężyn gazowych Dwa różne typy sprężyn gazowych powinny zostać odseparowane. Sprężyny gazowe podczas kontroli mogą być obracane.
Differentiation of pneumatic cylinders
Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis.
|
|
|
:
|
APP N° 410
|
Kontrola prędkości obrotowej wirników turbosprężarki doładowującej Prędkość obrotowa wirników turbosprężarki doładowującej.powinna być kontrolowana. W tym celu jedna z łopatek wirnika powinna zostać powleczona bezbarwnym lakierem fluoryzującym.
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled. At this, one of the blades of the wheel is coated with a fluorescent transparent lacquer.
|
|
|
:
|
APP N° 409
|
Rozpoznanie szczelin w stalowych rdzeniach silników elektrycznych Szczeliny w stalowych rdzeniach silników elektrycznych powinny być prawidłowo rejestrowane przy większych obrotach.
Gap detection on iron cores of electrical motors
The gaps on iron cores of electrical motors should be detected during the fast rotation.
|
|
|
:
|
APP N° 408
|
Rozróżnianie czarnych i ciemnoszarych kolorów skóry syntetycznej Zadaniem czujnika jest rozróżnianie czarnych i ciemnoszarych kolorów skóry syntetycznej.
Differentiation of black and dark gray leather imitation
Dark gray and black leather imitation should be distinguished.
|
|
|
:
|
APP N° 407
|
Detekcja pozostałości tworzywa na podstawie elementów metalowych Zadaniem czujnika jest detekcja pozostałości tworzywa na podstawie elementów metalowych.
Detection of plastic residues on the start of metal thread
Plastic residues on the start of metal threads should be detected.
|
|
|
:
|
APP N° 406
|
Kontrola przezroczystości arkuszy z tworzywa Zadaniem czujnika jest kontrola przezroczystości arkuszy z tworzywa.
Transparency control of white plastic plates
The transparency of white plastic plates should be controlled.
|
|
|
:
|
APP N° 405
|
Kontrola obecności gwintu wewnętrznego oraz otworów w kole zębatym Czujnik kontroluje obecność gwintu wewnętrznego oraz obecność wiertła w otworach.
Presence control of an inside thread and a hole at a gear wheel
The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit.
|
|
|
:
|
APP N° 404
|
Kontrola wysokości pinu oraz głębokości otworu wpustowego koła zębatego Czujnik kontroluje wysokość pinu oraz głębokość otworu wpustowego koła zębatego. Możliwa jest także kontrola wysokości zębów koła.
Height measurement of a metal pin and of the teeth as well as the depth of a blind hole on a metal gear wheel
The height of a metal pin as well as the depth of a blind hole on a gear wheel should be controlled. Furthermore, the height of the teeth on the gear wheel should be measured.
|
|
|
:
|
APP N° 403
|
Kontrola wielkości wybrania w aluminiowej obudowie turbosprężarki Zadaniem czujnika jest kontrola wielkośći wybrania w aluminiowej obudowie turbosprężarki.
Gap size measurement on an aluminum casting of a turbo charger
The gap size on the aluminum housing of a turbo charger should be measured.
|
|
|
:
|
APP N° 402
|
Kontrola koloru izolacji przewodów Czujnik kontroluje kolor izolacji przewodów.
Color control of cable jacket
The color of a cable jacket should be controlled.
|
|
|
:
|
APP N° 401
|
Detekcja obecności klejącej warstwy UV na detalu z tworzywa Czujnik wykrywa obecność klejącej warstwy UV na detalu z tworzywa.
Presence control of UV bond on a plastic component
The presence of an UV adhesive layer on the backside of a plastic part should be controlled. A false detection even from the front side of the plastic component must be avoided.
|
|
|
:
|
APP N° 400
|
Pomiar grubości opaski metalowej Czujnik mierzy bezdotykowo grubość opaski bimetalowej podczas transportu na linii.
Thickness measurement of a bimetal band
The thickness of a bimetal band should be measured contactless during the movement.
|
|
|
:
|
APP N° 399
|
Rozróżnianie półprzezroczystych folii Czujnik rozróżnia półprzezroczyste folie.
Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
|
|
|
:
|
APP N° 398
|
Detekcja obecności niewielkich płytek metalowych na miedzianych kontaktach Zadaniem czujnika jest detekcja obecności niewielkich płytek metalowych na miedzianych kontaktach.
Presence control of small metal plates on a copper contact
The presence of a small and thin metal plate should be detected.
|
|
|
:
|
APP N° 397
|
Detekcja przetłoczeń w folii Zadaniem czujnika jest detekcja przetłoczeń w połprzezroczystej folii. Detekcja możliwa jest jedynie z wierzchniej strony.
Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
|
|
|
:
|
APP N° 396
|
Kontrola fluorescencji wody w systemie oczyszczania Czujnik kontroluje zawartość oleju w wodzie. W miarę zużycia zawartość oleju wzrasta.
Fluorescence control of water based cleaning systems
The amount of oil in an oil-water based emulsion should be controlled. Over time cleaning water used for water based cleaning machines is changing into an oil-water based emulsion with a steady increase of the content of oil.
|
|
|
:
|
APP N° 395
|
Kontrola mętności wody w systemie oczyszczania Zadaniem czujnika jest kontrola mętności wody w systemie oczyszczania. Z czasem woda zawiera coraz więcej zanieczyszczeń i powinna być wymieniona.
Turbidity control of water based cleaning systems
The turbidity of cleaning water used for cleaning systems should be controlled. Over time, the cleaning water becomes more and more an oil-in-water emulsion mixed with dirt, grease and small metal swarf.
|
|
|
:
|
APP N° 394
|
Detekcja zielonych i pomarańczowych znaczników UV. Czujnik rozróżnia zielone i pomarańczowe znaczniki UV naniesione sprayem na materiał.
Detection of a fluorescent green and orange mark
Orange as well as a green fluorescent marks sprayed on a white fleece should be detected and distinguished.
|
|
|
:
|
APP N° 393
|
Kontrola obecności paska Velcro na tylnej półce Zadaniem czujnika jest kontrola obecności paska Velcro na tylnej półce auta.
Presence control of a Velcro® strip on rear shelf
The presence of a Velcro® strip on a hat shelf should be controlled.
|
|
|
:
|
APP N° 392
|
Kontrola pozycji folii na powierzchni kartonowej Czujnik monitoruje pozycję folii na powierzchni kartonu. Folia powinna przykrywać ok. 10mm górnej krawędzi kartonu.
Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.
|
|
|
:
|
APP N° 391
|
Detekcja fluorescencyjnego włókna w materiale Fluorescencyjne włókno jest używane do oznaczenia miejsca połączenia dwóch brytów materiału. Występuje w kolorze pomarańczowym lub żółtym.
Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
|
|
|
:
|
APP N° 390
|
Kontrola koloru plastikowych profili okiennych Zdaniem czujnika jest kontrola plastikowych profili okiennych.
Color control of plastic window profiles
Plastic profiles which are used for casement frames should be color controlled.
|
|
|
:
|
APP N° 389
|
Kontrola koloru uchwytów Czujnik kontroluje kolor uchwytów w branży automotive.
Color control of handles
Handles in the automotive field should be color controlled.
|
|
|
:
|
APP N° 388
|
Detekcja krawędzi matrycy Zadaniem czujnika jest detekcja krawędzi matrycy o grubości 80µm.
Wafer edge detection
The edges of wafers with a thickness of 80µm should be detected.
|
|
|
:
|
APP N° 387
|
Rozróżnianie kolorów skóry syntetycznej i innych materiałów wykończeniowych wnętrza auta Czujnik rozróżnia kolory ciemnych i jasnych skór syntetycznych oraz innych materiałów. Niektóre z nich są bardzo podobne, jednak różnią się strukturą powierzchni.
Color differentiation of leather imitations and fabrics in the interior area
Different dark and light leather imitations and fabrics should be differentiated. The colors of the different dark parts as well as of the light parts are very close, almost the same, but the structure of the respective surface is slightly different.
|
|
|
:
|
APP N° 386
|
Kontrola wysokości między detalami przed spawaniem Czujnik mierzy wysokość w pionie pomiędzy 2 detalami przed spawaniem.
Vertical height control between a turned metal part and a press-bent part
The vertical height between a shiny turned metal part and a press-bent part should be measured immediately before welding.
|
|
|
:
|
APP N° 385
|
Kontrola odległości do czarnych odbojników Czujnik wykrywa odległość do czarnych odbojników.
Distance control of black rubber buffers
The distance of black rubber buffers should be controlled.
|
|
|
:
|
APP N° 384
|
Detekcja krawędzi taśmy sygnałowej Czujnik bardzo precyzyjnie wykrywa krawędź taśmy sygnałowej.
Detection of the edge of a stripped ribbon cable
The beginning of the laser stripped part of a ribbon cable should be precisely detected.
|
|
|
:
|
APP N° 383
|
Rozróżnianie kolororów sensorów ultradźwiękowych z odległości 100mm Zadaniem czujnika jest rozróżnianie połyskujących kolorów sensorów ultradźwiękowych z odległości 100mm.
Color differentiation of ultrasonic sensors at a distance of 100mm
Ultrasonic sensors should be color differentiated at a distance of 100mm. It has to be taken into account, that the surface of the ultrasonic sensor cap is very glossy.
|
|
|
:
|
APP N° 382
|
Rozróżnianie czarnego i szarego aksamitu z odległości 100mm Czujnik rozróżnia czarne i szare elementy wyposażenia wnętrza auta z pokryciem aksamitnym materiałem z odległości 100mm.
Differentiation of black and gray velvet at a sensor distance of 100mm
Black and gray interior parts with a velvet casing should be color differentiated at a distance of 100mm.
|
|
|
:
|
APP N° 381
|
Rozróżnianie kolorów lakierowanych elementów z tworzywa z odległości 100mm Czujnik rozróżnia kolory lakierowanych elementów z tworzywa. Ich powierzchnia jest bardzo błyszcząca. Czujnik powinien poprawnie rozpoznawać również powierzchnie pokryte lakierem metalicznym z odległości minimum 100mm.
Color differentiation of lacquered plastic parts at a distance of 100mm
Lacquered plastic parts should be color differentiated. The parts are very glossy and even metallic lacquer should be controlled at a distance of in minimum 100mm.
|
|
|
:
|
APP N° 380
|
Rozróżnianie kolorów elementów plastikowych wnętrza auta z odległości 100mm Zadaniem czujnika jest rozróżnianie kolorów elementów plastikowych wnętrza auta z odległości 100mm.
Color differentiation of plastic parts in the interior field at a distance of 100mm
Plastic interior parts should be color differentiated from a distance of 100mm.
|
|
|
:
|
APP N° 379
|
Detekcja przezroczystej folii na powierzchni lakierowanej z odległości 100mm Zadaniem czujnika jest detekcja przezroczystej folii (z efektem polaryzacji) na powierzchni lakierowanej z odległości 100mm.
Detection of a transparent film on a lacquered surface at a distance of 100mm
A transparent film should be detected on a shiny lacquered surface. It has to be taken into account that the plastic film has a certain polarization effect.
|
|
|
:
|
APP N° 378
|
Kontrola koloru detalu z formy wtryskowej Czujnik kontroluje kolor detalu z formy wtryskowej. Detale różnią się zarówno kolorem jak i połyskiem. Ponieważ najbardziej jednorodna jest powierzchnia blisko krawędzi detalu, wiązka światła czujnika powinna być skierowana właśnie w to miejsce.
Color control of injection moldings
Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge.
|
|
|
:
|
APP N° 377
|
Rozróżnianie koloru sensorów ultradźwiękowych Czujnik rozróżnia kolor sensorów ultradźwiękowych. Ich powierzchnia jest bardzo błyszcząca.
Color differentiation of ultrasonic sensors
Ultrasonic sensors should be color differentiated. It has to be taken into account, that the surface is very glossy.
|
|
|
:
|
APP N° 376
|
Rozróżnianie koloru detali pokrytych aksamitnym materiałem Czujnik rozróżnia kolor detali wnętrza auta pokrytych aksamitnym materiałem.
Color differentiation of interior components with velvet surface
Parts made for the interior field with a black or dark gray velvet surface should be color differentiated.
|
|
|
:
|
APP N° 375
|
Rozróżnianie kolorów lakierowanych detali z tworzywa Zadaniem czujnika jest rozróżnianie kolorów lakierowanych detali z tworzywa. Ich powierzchnia jest bardzo błyszcząca.
Color differentiation of lacquered plastic components
Lacquered plastic parts should be differentiated. It should be taken into account, that the surface is very glossy.
|
|
|
:
|
APP N° 374
|
Rozróżnianie koloru elementów wykończenia wnętrza auta Czujnik rozróżnia jasnoszare i ciemnoszare detale wykończenia wnętrza auta.
Color differentiation of plastic parts in the interior field
Gray plastic parts should be separated from dark gray plastic parts.
|
|
|
:
|
APP N° 373
|
Detekcja folii na lakierowanych elementach z tworzywa Czujnik wykrywa folię na czarnych i białych elementach z tworzywa. Dodatkowym utrudnieniem jest połyskująca powierzchnia detali.
Detection of transparent film on lacquered plastic components
A transparent film should be detected on a black as well as white lacquered plastic part. It has to be taken into account, that the white and the black surface are very shiny and the plastic film as well.
|
|
|
:
|
APP N° 372
|
Kontrola jakości elementów przekładni Zadaniem czujnika jest kontrola szerokości zęba oraz przerwy pomiędzy zębami przekładni.
Quality control of internal gears
The width of the teeth as well as the gap between the teeth of internal gears should be controlled.
|
|
|
:
|
APP N° 371
|
Kontrola obecności warstwy chromowanej Zadaniem czujnika jest kontrola obecności warstwy chromowanej metalowego detalu.
Chromium plating presence control
The presence of chromium plating on a metal part should be controlled.
|
|
|
:
|
APP N° 370
|
Kontrola koloru białych profili z tworzywa Czujnik kontroluje kolor białych profili z tworzywa.
Color control of white plastic profiles
The color of white plastic profiles should be controlled.
|
|
|
:
|
APP N° 369
|
Detekcja kolorowych znaczników na powierzchni folii Czujnik wykrywa czarny znacznik na błyszczącej folii z dowolnym kolorem tła.
Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.
|
|
|
:
|
APP N° 368
|
Detekcja pozycji lakierowanych arkuszy metalu Czujnik w precyzyjny sposób wykrywa krawędź lakierowanego arkusza metalu. Jego zadaniem jest pomiar odległości pomiędzy arkuszami w pełnym zakresie palety kolorów, wliczając czarny z wysokim połyskiem oraz matowy biały.
Position detection of lacquered metal sheets
The edge of different lacquered metal sheets should be precisely detected. Furthermore the distance of the painted metal plates should be measured. At this, it has to be taken into account, that a color gamut as well as gray scale range from shiny black to matt white should be covered.
|
|
|
:
|
APP N° 367
|
Kontrola obecności uszczelki w detalu z tworzywa Zadaniem czujnika jest kontrola obecności uszczelki w detalu z tworzywa.
Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
|
|
|
:
|
APP N° 366
|
Kontrola koloru tafli szkła Zadaniem czujnika jest kontrola koloru tafli szkła.
Color control of flat glass
The color of flat glass should be controlled in the transmitted-light mode.
|
|
|
:
|
APP N° 365
|
Kontrola koloru lakierowanych arkuszy metalu Zadaniem czujnika jest kontrola koloru lakierowanych arkuszy metalu, w tym także arkuszy pokrytych lakierem metalicznym.
Color control of lacquered metal sheets
Lacquered metal sheets should be color differentiated. Even metallic paints must be color controlled.
|
|
|
:
|
APP N° 364
|
Kontrola dojrzałości kwiatów Czujnik kontroluje dojrzałość kwiatów. Kryterium kontroli stanowi dojrzałość kwiatów.
Color control of the degree of ripeness of flowers
The degree of ripeness of flowers should be controlled. A distinguishing criterion for the degree of ripeness is the color of the flowers.
|
|
|
:
|
APP N° 363
|
Kontrola długości metalowego wałka Zadaniem czujnika jest kontrola długości metalowego wałka. Prędkość linii wynosi ok. 2m/s.
Length control of a metal rod
The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement.
|
|
|
:
|
APP N° 362
|
Detekcja obecności etykiety na butelce z tworzywa Zadaniem czujnika jest detekcja obecności etykiety na butelce z tworzywa.
Label presence detection on plastic bottles
The presence of a label on plastic bottles should be controlled.
|
|
|
:
|
APP N° 361
|
Kontrola koloru preform PET Czujnik kontroluje kolor preform PET.
Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
|
|
|
:
|
APP N° 360
|
Kontrola obecności niebieskich i zielonych znaczników na powierzchni szarego detalu z tworzywa Zadaniem czujnika jest kontrola obecności niebieskich i zielonych znaczników na powierzchni szarego detalu z tworzywa.
Presence control of a blue and a green mark on a gray plastic component
A green as well as a blue mark should be present on a gray plastic component.
|
|
|
:
|
APP N° 359
|
Detekcja obecności warstwy uszczelniającej na zwojach gwintu nakrętki Czujnik wykrywa obecność warstwy uszczelniającej na zwojach gwintu nakrętki.
Screw locking varnish presence control on female threads
The presence of a thread lock fluid should be controlled on inside threads.
|
|
|
:
|
APP N° 358
|
Rozróżnianie szlifowanych i surowych pinów metalowych Zadaniem czujnika jest rozróżnianie szlifowanych i surowych pinów metalowych.
Differentiation of grinded and raw metal pins
Grinded and raw metal pins should be differentiated.
|
|
|
:
|
APP N° 357
|
Rozróżnianie kolorów O-ringów Zadaniem czujnika jest rozróżnianie kolorów O-ringów. Dodatkowym utrudnieniem jest połyskowa powierzchnia.
Color differentiation of O-rings
O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy.
|
|
|
:
|
APP N° 356
|
Rozróżnianie metalowych prętów Czujnik rozróżnia metalowe wałki z wykończeniem gładkim i wielowpustowym.
Differentiation of metal rods
Metal rods with an even finish should be differentiated from metal rods with a slotted end. Furthermore a metal rod with a black slotted end should be differentiated from a steel colored end.
|
|
|
:
|
APP N° 355
|
Kontrola szerokości półprzezroczystej folii Czujnik kontroluje szerokość półprzezroczystej folii o szerokości 18,5mm. Ponieważ folia może przesuwać się na boki podczas pomiaru o ±10mm, zakładamy zakres pomiarowy na poziomie 50mm.
Width control of a semitransparent plastic film
The width of a semitransparent plastic film should be controlled. At this, the transversal drift of the 18.5mm wide plastic film is around ±10mm, thus the detecting range should be 50mm.
|
|
|
:
|
APP N° 354
|
Kontrola grubości włókien z tworzyw sztucznych Zadaniem czujnika jest kontrola średnicy pojedyńczego włókna w zakresie od 0,1 do 2,0mm.
Diameter control of plastic monofilaments
The diameter of plastic monofilaments should be controlled. At this, monofilaments with diameters starting from 0.1mm up to 2mm are possible.
|
|
|
:
|
APP N° 353
|
Kontrola podwójnych warstw folii Zadaniem czujnika jest dokładne wykrycie partii folii jedno- i dwuwarstwowych.
Double layer control of plastic films
With a view to the changeover from the double layer to the single layer range of a plastic film a sensor system should deliver exactly a signal which informs about the beginning of the single layer as well as the double layer range.
|
|
|
:
|
APP N° 352
|
Detekcja uszkodzeń na powierzchni opasek metalowych Czujnik wykrywa ciemne i jasne punkty różnej wielkości na powierzchni opasek metalowych.
Defect detection on metal bands
Dark as well as bright spots with different size should be detected on metal bands.
|
|
|
:
|
APP N° 351
|
Kontrola koloru klamry pasów bezpieczeństwa Czujnik rozróżnia kolory klamry pasów bezpieczeństwa.
Color control of seat belt plugs
Seat belt plugs should be color differentiated.
|
|
|
:
|
APP N° 350
|
Kontrola koloru pinów z tworzywa Czujnik rozróżnia kolory pinów z tworzywa wykorzystywanych w pasach samochodowych.
Color control of plastic pins
Plastic pins which are used for seat belts should be color differentiated.
|
|
|
:
|
APP N° 349
|
Kontrola koloru pasów bezpieczeństwa Zadaniem czujnika jest rozróżnianie koloru pasów bezpieczeństwa.
Color control of seat belts
The fabric of the seat belts should be color controlled.
|
|
|
:
|
APP N° 348
|
Kontrola koloru osłon mocowania zamka pasów bezpieczeństwa Czujnik kontroluje kolor osłony mocowania zamka pasów bezpieczeństwa.
Color control of seat belt rubbers
Seat belt rubbers should be color differentiated.
|
|
|
:
|
APP N° 347
|
Kontrola koloru gniazd zamka pasów bezpieczeństwa Czujnik kontroluje kolor gniazd zamka pasów bezpieczeństwa.
Color control of seat belt sockets
Seat belt sockets should be color controlled.
|
|
|
:
|
APP N° 346
|
Kontrola koloru w systemach mocowań sufitowych Czujnik kontroluje kolor w systemie mocowań sufitowych.
Color control of T-grids for ceiling systems
T-grids used for ceiling systems should be color controlled.
|
|
|
:
|
APP N° 345
|
Kontrola obecności linii na drucie metalowym Czujnik wykrywa linie na powierzchni drutu miedzianego.
Stamping mark presence control on metal wires
The presence of stamped small lines should be controlled on a copper colored metal wire.
|
|
|
:
|
APP N° 344
|
Kontrola podwójnych płyt fornirowych Czujnik wykrywa podwójne płyty fornirowe podczas w systemie podajników maszyny.
Double sheet control of veneers
During the transportation of veneers, it should be controlled whether one or more than one veneer was picked up from a handling system.
|
|
|
:
|
APP N° 343
|
Detekcja logo na przydymionym szkle Czujnik wykrywa logo na przydymionym szkle. Wykorzystane jest zjawisko zmiany kąta załamania światła przy przejściu przez logo.
Detection of a brand name on fog light glasses
A logo should be detected on a fog light glass. It has been shown that the brand name in the glass is acting like an optical component and deflects the laser beam in a different way compared to the normal glass surface.
|
|
|
:
|
APP N° 342
|
Kontrola obecności folii Czujnik kontroluje obecność folii na kopertach. Wykorzystany klej jest delikatnie fluorescencyjny, a matowa folia absorbuje światło UV.
Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.
|
|
|
:
|
APP N° 341
|
Kontrola zawijania folii Czujnik wykrywa zawijanie krawędzi paska folii.
Plastic film plunging control
Folds in a matt plastic film should be detected.
|
|
|
:
|
APP N° 340
|
Kontrola koloru frezu w płytach MDF Czujnik kontroluje kolor frezu w płycie MDF. W przypadku błędu widoczny będzie surowy materiał.
Color control of grooves on MDF plates
Grooves on MDF plates should be color controlled. In case of failure the MDF background color can be seen.
|
|
|
:
|
APP N° 339
|
Pomiar wysokości pasów blachy na odwijarce Czujnik kontroluje pozycję pasów blachy. Dodatkowym utrudnieniem jest falowanie pasów oraz wysoka prędkość linii.
Metal sheet height control on rewinders and unwinders in the stamping industry
The position of metal stripes on re- and unwinders should be controlled. At this, it has to be taken into account that the metal stripes, especially the small bands, are oscillating and the acceleration can be very high.
|
|
|
:
|
APP N° 338
|
Pomiar grubości folii Zadaniem czujnika jest pomiar grubości folii.
Plastic film thickness measurement
The thickness of a plastic film should be measured.
|
|
|
:
|
APP N° 337
|
Rozróżnianie strony folii Czujnik odróżnia stronę z połyskiem od strony szorstkiej folii.
Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
|
|
|
:
|
APP N° 336
|
Detekcja znaczników UV na płycie drewnianej Czujnik wykrywa znaczniki UV na płycie drewnianej. Zdarza się, że znaczniki występują bardzo blisko siebie.
Detection of fluorescent marks on wooden board
Fluorescent marks should be detected on wooden boards. At this, two marks which are close together should be proper detected.
|
|
|
:
|
APP N° 335
|
Detekcja obecności etykiety na półce bagażnika Czujnik wykrywa obecność etykiety na półce bagażnika.
Presence detection of felt label on a backlight shelf
The presence of a felt label on a rear window shelf should be checked.
|
|
|
:
|
APP N° 334
|
Rozróżnianie kolorów skóry syntetycznej oraz innych materiałów Czujnik rozróżnia kolor materiałów oraz skóry syntetycznej w branży automotive.
Color differentiation of fabrics and leather imitations
Fabrics as well as leather imitations should be differentiated in the automotive interior field.
|
|
|
:
|
APP N° 333
|
Okresowa kontrola wentylatorów przemysłowych Wentylatory przemysłowe powinny być okresowo sprawdzane. Dodatkowo konieczna jest kontrola kierunku obrotów.
Frequency control of industrial ventilators
Ventilators for industrial purposes should be frequency checked. Furthermore the direction of rotation should be controlled.
|
|
|
:
|
APP N° 332
|
Detekcja zniekształceń w profilu aluminiowym Czujnik wykrywa zniekształcenia profilu aluminiowego.
Detection of super elevations of aluminum profile
Super elevations of aluminum profile should be detected.
|
|
|
:
|
APP N° 331
|
Detekcja czerwonego i białego światła odbitego od powierzchni elementów wnętrza auta Czujnik wykrywa czerwone i białe światło odbite od powierzchni elementów wnętrza auta.
Detection of red and white diffuse light on interior components
The diffuse red and white light should be detected on interior components.
|
|
|
:
|
APP N° 330
|
Detekcja przezroczystej etykiety fluorescencyjnej na przezroczystej folii Zadaniem czujnika jest detekcja przezroczystej etykiety fluorescencyjnej na przezroczystej folii.
Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
|
|
|
:
|
APP N° 329
|
Kontrola koloru tektury falistej Czujnik kontroluje kolor tektury falistej, w szczególności czarne obszary. Detekcja odbywa się z odległości minimum 120mm.
Corrugated cardboard color control
The color of corrugated cardboards should be controlled. Especially black areas should be detected and the distance from the cardboard to the sensor should be larger than 120mm.
|
|
|
:
|
APP N° 328
|
Kontrola dwuwarstwowych arkuszy papieru Zadaniem czujnika jest odróżnianie jedno- od dwuwarstwowych arkuszy papieru.
Double layered paper sheet control
Double-layered paper sheets should be differentiated from single sheets.
|
|
|
:
|
APP N° 327
|
Detekcja warstwy matującej na opasce metalowej Zadaniem czujnika jest detekcja warstwy matującej na opasce metalowej.
Tarnish film detection on metal band
A tarnish film should be detected on metal band.
|
|
|
:
|
APP N° 326
|
Kontrola obecności smaru na detalu metalowym Czujnik sprawdza obecność smaru na detalu metalowym z odległości minimum 200mm.
Presence control of red lubricant on metal pin
The presence of a red lubricant on a metal pin should be controlled. A minimum sensor distance of approx. 200mm is required.
|
|
|
:
|
APP N° 325
|
Kontrola obecności przewodów w oplocie oraz jego gęstości Czujnik sprawdza obecność przewodów w oplocie oraz kontroluje jego gęstość.
Braided hose wire absence and overstretch control
The presence of all wires inside a braided hose should be controlled. Furthermore it should be controlled, whether the hose is overstretched.
|
|
|
:
|
APP N° 324
|
Detekcja uszkodzeń oplotu kablowego Czujnik wykrywa zmiany średnicy oplotu kablowego.
Braided cable sleeves diameter failure detection
Deviations of the diameter of braided sleeves should be detected.
|
|
|
:
|
APP N° 323
|
Rozróżnianie czarnej i szarej włókniny naturalnej komponentów wyposażenia wnętrza Zadaniem czujnika jest rozróżnianie czarnej i szarej włókniny naturalnej komponentów wyposażenia wnętrza.
Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
|
|
|
:
|
APP N° 322
|
Detekcja żółtego paska na metalowych zaciskach Czujnik wykrywa obecność zółtego paska na metalowych zaciskach.
Detection of a yellow stripe on metal clamps
The presence of a yellow striped on metal clamps should be detected.
|
|
|
:
|
APP N° 321
|
Detekcja paska klejącego na kopercie Czujnik wykrywa pasek klejący na kopercie przy wykorzystaniu fluorescencji kleju.
Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.
|
|
|
:
|
APP N° 320
|
Rozróżnianie folii z tworzywa Aplikacja polega na rozróżnianiu przezroczystych folii lekko odbijających światło. Dodatkowo czujnik kontroluje przezroczystość.
Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
|
|
|
:
|
APP N° 319
|
Rozróżnianie strzykawek z warstwą ochronną od strzykawek bez warstwy ochronnej Czujnik rozróżnia strzykawki z warstwą ochronną od strzykawek bez warstwy ochronnej.
Differentiation of coated and uncoated syringes
Coated syringes should be distinguished from uncoated syringes.
|
|
|
:
|
APP N° 318
|
Detekcja czarnej i szarej warstwy pokrycia na metalowych detalach Czujnik rozróżnia metalowe detale z pokryciem czarnym i szarym od detali bez pokrycia w komorze lakierniczej w strefie EX.
Detection of black and gray lacquer coat on metal part
In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts.
|
|
|
:
|
APP N° 317
|
Detekcja pasków UV na biletach Czujnik wykrywa fluorescencyjny pasek UV na biletach.
Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
|
|
|
:
|
APP N° 316
|
Rozróżnianie koloru osłon sensorów ultradźwiękowych z dużej odległości Zadaniem czujnika jest rozróżnianie koloru osłon sensorów ultradźwiękowych z odległości 450mm.
Color differentiation of ultrasonic sensor caps from far distance
The color of ultrasonic sensor caps should be controlled from a distance of 450mm.
|
|
|
:
|
APP N° 315
|
Detekcja warstwy kleju na śrubie z tworzywa Czujnik wykrywa warstwę kleju na śrubie z tworzywa.
Adhesive film presence detection on plastic screws
The presence of an adhesive film should be controlled on the thread of plastic screws.
|
|
|
:
|
APP N° 314
|
Rozróżnianie kolorowych sensorów ultradźwiękowych Aplikacja polega na rozróżnianiu kolorów sensorów ultradźwiękowych.
Differentiation of different colored ultrasonic sensors
Ultrasonic sensors should be color differentiated.
|
|
|
:
|
APP N° 313
|
Rozróżnianie koloru elementów z tworzywa wykorzystywanych we wnętrzu auta Zadaniem czujnika jest rozróżnianie koloru elementów z tworzywa wykorzystywanych we wnętrzu auta.
Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
|
|
|
:
|
APP N° 312
|
Detekcja kolorowych znaczników na różnokolorowych opakowaniach z tworzywa Zadaniem czujnika jest detekcja kolorowych znaczników na różnokolorowych opakowaniach z tworzywa.
Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
|
|
|
:
|
APP N° 311
|
Detekcja obecności otworu gwintowanego w aluminiowej obudowie Czujnik wykrywa gwint otworu w aluminiowej obudowie. Dodatkowym utrudnieniem jest odróżnienie otworu gwintowanego od gładkiego.
Presence control of a blind thread in aluminum casting
An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole.
|
|
|
:
|
APP N° 310
|
Detekcja przerwy w warstwie klejącej plastra Zadaniem czujnika jest detekcja przerwy w warstwie klejącej plastra.
Detection of a gap on adhesive plaster
The presence of a gap of the tape on an adhesive plaster should be detected.
|
|
|
:
|
APP N° 309
|
Detekcja kolorowych znaczników oraz rozróżnianie koloru włókien światłowodu Czujnik wykrywa zarówno kolor znacznika jak i kolor światłowodu. Prędkość przesuwu światłowodu wynosi ok. 10m/s.
Color mark detection on optical fibers and color differentiation of optical fibers
The color as well as a color mark should be detected on optical fibers. The feed speed of the glass fiber is roughly 10 m/s.
|
|
|
:
|
APP N° 308
|
Kontrola obecności taśmy klejącej na przezroczystej folii Zadaniem czujnika jest kontrola obecności taśmy klejącej na przezroczystej folii. Część taśmy jest fluorescencyjna.
Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.
|
|
|
:
|
APP N° 307
|
Rozróżnianie kolorów syntetycznej skóry w branży automotive Czujnik rozróżnia kolory syntetycznej skóry w branży automotive.
Color Differentiation of leather imitations in the automotive field
Different colored leather imitations should be recognized and differentiated.
|
|
|
:
|
APP N° 306
|
Kontrola koloru palonych ziaren kawy Czujnik kontroluje kolor ziaren odpowiadający poziomowi palenia kawy.
Color control of the roast level of coffee beans
The color of roasted beans should be control. At this, the color informs about the roast level of the coffee beans.
|
|
|
:
|
APP N° 305
|
Detekcja miejsca spawu zaznaczonego czarną linią na powierzchni pasów metalowych Czujnik wykrywa czarną linię w miejscu spawu niezależnie od zmiennego koloru paska metalowego.
Detection of a black marked welding line on different metal stamping stripes
A black mark should be detected on metal stamping stripe. At this, the stripes can be different in color and gloss.
|
|
|
:
|
APP N° 304
|
Rozróżnianie strony płytki szklanej Czujnik rozróżnia matową i połyskującą stronę płytki szklanej.
Differentiation of the backside from the front side of a glass plate
The matt backside of a glass plate should be differentiated from the glossy front side.
|
|
|
:
|
APP N° 303
|
Kontrola wysokości kopułek w ramkach matrycy Czujnik kontroluje wysokość kopułek w ramkach matrycy. Poprawnie wykrywane są również kopułki bezbarwne.
Dome height inspection of lead frames
The height of the domes on lead frames should be controlled. Even a transparent coating can be controlled.
|
|
|
:
|
APP N° 302
|
Pomiar odległości do powierzchni aluminium Czujnik mierzy odległość do powierzchni szlifowanego aluminium. Zarówno metoda pomiaru jak i sposób szlifowania aluminium zależą w dużym stopniu od kąta nachylenia powierzchni.
Distance measurement onto an aluminum ground surface
The distance to an aluminum ground surface should be measured. At this, the grinding is extremely angle-dependent and thus, the consequences in using a laser displacement sensor are that the reflectivity is strongly angle-dependent, too.
|
|
|
:
|
APP N° 301
|
Detekcja krawędzi tubki z tworzywa Czujnik wykrywa górną krawędź tuby wykonanej z tworzywa podczas jej obrotu wokół własnej osi.
Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.
|
|
|
:
|
APP N° 300
|
Rozróżnianie kolorów beżowych papierów Zadaniem czujnika jest odróżnianie kolorów beżowych papierów. Obszar detekcji ma średnicę ok. 25mm.
Color differentiation of beige papers
Beige colored papers should be color differentiated. At this, the detecting area should be around 25mm in diameter.
|
|
|
:
|
APP N° 299
|
Detekcja rozgałęzienia w gałęziach Zadaniem czujnika jest detekcja rozgałęzienia w gałęziach. Prędkość przesuwu oraz grubość gałęzi może się zmieniać w zależności od dostawy. Zakres detekcji wynosi 100mm.
Detection of embeddings in branches
Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected.
|
|
|
:
|
APP N° 298
|
Rozróżnianie koloru komponentów wnętrza auta Czujnik rozróżnia kolory 6 różnych komponentów wnętrza auta. Odległość czujnika wynosi 50mm, a plamka ma średnicę ok. 20mm.
Color differentiation of interior components
Six different interior components should be color differentiated. The sensor distance should be around 50mm and the detecting range of the color sensor at this distance should be approximately 20mm in diameter.
|
|
|
:
|
APP N° 297
|
Rozróżnianie koloru detalu z tworzywa Czujnik rozróżnia kolor detalu z tworzywa. W tej aplikacji wysoki połysk powierzchni minimalizuje różnice w kontraście pomiędzy 3 komponentami.
Color differentiation of plastic fittings
The color of plastic fittings should be controlled. At this, the high gloss factor of the surface reduces the contrast difference between the three different components.
|
|
|
:
|
APP N° 296
|
Detekcja spętleń w wiązce włókien syntetycznych Zadaniem czujnika jest detekcja spętleń w szybko transportowanej wiązce włókien syntetycznych. Optyczna bariera jednodrogowa jest umieszczona w taki sposób, aby prawidłowa wiązka nie zakłócała jej sygnału. Dopiero pojawienie się spętleń spowoduje przerwanie bariery.
Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
|
|
|
:
|
APP N° 295
|
Detekcja fluorescencyjnego pokrycia na czarnych uszczelkach gumowych Czujnik wykrywa warstwę fluorescencyjną na powierzchni uszczelki gumowej (zakres długości fali: 365nm..385nm). Na dalszym etapie znaczniki UV zostaną zastąpione znacznikami niebieskimi światła widzialnego.
Detection of a fluorescent coating on black rubber seal
The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range.
|
|
|
:
|
APP N° 294
|
Kontrola grubości błyszczących, aluminiowych poduszek Czujnik mierzy grubość aluminiowych poduszek używanych do izolacji termicznej. Poduszki są transportowane podajnikiem taśmowym. Ponieważ drgania pionowe taśmy podajnika są bardzo mało, możemy wykorzystać dystans do jego powierzchni jako wartość referencyjną.
Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.
|
|
|
:
|
APP N° 293
|
Kontrola koloru i kontrastu tarcz tachometru Czujnik kontroluje kolor czarnej tarczy tachometru. Zarówno kolor jak i kontrast powinny mieścić się w zadanej tolerancji.
Color and contrast control of a tachometer sheet
The color of a black tachometer sheet should be controlled; the color as well as the grey scale should remain in a certain tolerance range.
|
|
|
:
|
APP N° 292
|
Kontrola obecności plastikowej siatki Kontrola obecności plastikowej siatki.
Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
|
|
|
:
|
APP N° 291
|
Kontrola połysku ramki matrycy Czujnik kontroluje połysk ramki matrycy półprzewodników. Powierzchnia, na której ma być umieszczony chip półprzewodnikowy może być gładka lub chropowata.
Lead frame gloss control
The gloss of lead frames should be controlled. At this, the surface where the semiconductor chip should be placed can be blank or rough.
|
|
|
:
|
APP N° 290
|
Rozróżnianie kolorów barwionego dna butelek Zadaniem czujnika jest rozróżnianie 4 kolorów barwionego dna butelek: bezbarwnego, żółtego, czerwonego i fioletowego.
Color differentiation of bottom colored clear glass bottles
Bottom colored clear glass bottles should be differentiated. At this, four different colored bottles can be possible: clear, yellow, red and violet.
|
|
|
:
|
APP N° 289
|
Kontrola osiowości dysku szlifierki kątowej Czujnik kontroluje osiowość dysku szlifierki kątowej.
Evenness control of angle grinder discs
The flatness of angle grinder discs should be controlled during the rotation.
|
|
|
:
|
APP N° 288
|
Kontrola obecności uszczelki o-ring w aluminiowej obudowie Zadaniem czujnika jest kontrola obecności uszczelki o-ring w aluminiowej obudowie.
Presence control of an o-ring seal on aluminum casing
The presence of an o-ring seal on aluminum housing should be controlled.
|
|
|
:
|
APP N° 287
|
Detekcja znaczników kolorowych na folii pokrytej aluminium Czujnik wykrywa znaczniki kolorowe na folii pokrytej aluminium. Na wyjściu wymagany jest zarówno sygnał cyfrowy jak i analogowy.
Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.
|
|
|
:
|
APP N° 286
|
Kontrola połysku izloacji przewodu Czujnik kontroluje połysk czarnej izolacji przewodu.
Gloss control of a cable jacket
The gloss of a black cable jacket should be controlled.
|
|
|
:
|
APP N° 285
|
Kontrola obecności włókniny na wiązce przewodów Czujnik kontroluje obecność włókniny izolującej na wiązce przewodów. Kolory wiżek różnią się w zależności od partii dostawy. Kolor włókniny jest zawsze biały.
Presence control of a fleece on a cable harness
The presence of a fleece on a cable bundle should be controlled. At this, the color of the harness can differ from batch to batch, whereas the color of the fleece remains white.
|
|
|
:
|
APP N° 284
|
Kontrola pozycji wsporników żarnika w żarówce Czujnik kontroluje pozycję wsporników żarnika w żarówce ze szkła bezbarwnego oraz szkła czerwonego.
Position control of filament holders in bulbs
The position of the filament holders in clear as well as red glass bulbs should be controlled.
|
|
|
:
|
APP N° 283
|
Kontrola pozycji zamków sprężyn części metalowych Czujnik kontroluje pozycję zatrzasku metalowego.
Position control of spring locks on metal parts
The position of the snap fit of a metal part should be controlled.
|
|
|
:
|
APP N° 282
|
Zliczanie półproduktów metalowych na stosie Czujnik kontroluje ilość półproduktów metalowych na stosie.
Counting of stacked metal blanks
The correct number of stacked metal blanks should be controlled.
|
|
|
:
|
APP N° 281
|
Kontrola wyrzutu detalu z matrycy Zadaniem czujnika jest zliczanie niewielkich detali po wyjściu z matrycy. Prędkość wyrzutu na poziomie kilku m/s.
Ejection control of stamping parts
Due to stamping tool protection reasons the ejection of very small stamping parts should be controlled and the parts counted. The ejection speed of the parts is in the range of a few m/s.
|
|
|
:
|
APP N° 280
|
Detekcja krawędzi tubki z tworzywa Czujnik wykrywa górną krawędź tuby wykonanej z tworzywa podczas jej obrotu.
Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.
|
|
|
:
|
APP N° 279
|
Kontrola koloru nakrętek plastikowych V Czujnik rozróżnia 4 kolory nakrętek (ciemnożólte, jasnożółte, ciemnozielone i jasnozielone).
Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
|
|
|
:
|
APP N° 278
|
Kontrola koloru nakrętek plastikowych IV Czujnik rozróżnia 3 kolory nakrętek (jasnoniebieskie, niebieskie i ciemnoniebieskie).
Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
|
|
|
:
|
APP N° 277
|
Kontrola koloru nakrętek plastikowych III Czujnik rozróżnia 3 kolory nakrętek (czarne, jasnozłote i ciemnozłote).
Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
|
|
|
:
|
APP N° 276
|
Kontrola koloru nakrętek plastikowych II Czujnik rozróżnia 3 kolory nakrętek (biały, jasnoczerwony i ciemnoczerwony).
Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
|
|
|
:
|
APP N° 275
|
Kontrola koloru plastikowych nakrętek Czujnik rozróżnia 3 różne kolory nakrętek (jasnopomarańczowy, ciemnopomarańczowy i szary).
Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.
|
|
APP N° 274
|
Detekcja uszkodzeń na powierzchni listew metalowych łożysk ślizgowych Zadaniem czujnika jest detekcja uszkodzeń na powierzchni listew metalowych łożysk ślizgowych.
Detection of machining marks on bimetallic strips of slide bearings
Chatter marks on slide bearing stripes should be detected immediately before the grinding process.
|
|
|
:
|
APP N° 273
|
Detekcja odcieni koloru preform PET Czujnik wykrywa odcień koloru preformy PET podczas produkcji. Matryca zatrzymuje się na kilka milisekund. Jest to wystarczający czas na pomiar koloru na każdej z matryc. Ponieważ kolor może się zmieniać, czujnik musi umożliwiać szybką konfigurację.
Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
|
|
|
:
|
APP N° 272
|
Detekcja taśmy samoprzylepnej na wykładzinie Czujnik wykrywa taśmę samoprzylepną łączącą 2 fragmenty wykładzin. Wykładziny różnią się kolorem. Taśma występuje w 2 kolorach: brązowym i żółtym.
Detection of an adhesive tape on plastic flooring
An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color.
|
|
|
:
|
APP N° 271
|
Detekcja kleju na przezroczystej folii Czujnik wykrywa obecność kleju na całej szerokośći folii przezroczystej. Klej jest lekko fluorescencyjny, podczas gdy folia nie.
Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
|
|
|
:
|
APP N° 270
|
Rozróżnianie spodniej i wierzchniej strony włókniny Czujnik rozróżnia spodnią i wierzchnią stronę włókniny. Spodnia strona (bez struktury) jest fluorescencyjna, natomiast wierzchnia tłumi fluorescencję.
Differentiation of front- and backside of a fleece
The front side of a fleece should be differentiated from the back side. The back side (non structured side) is UV fluorescent, whereas the plastic structured film is nonfluorescent and damps the fluorescence.
|
|
|
:
|
APP N° 269
|
Odróżnianie kolorów dwóch elementów plastikowych Czujnik odróżnia kolory dwóch elementów plastikowych wyposażenia wnętrza auta.
Color differentiation of two plastic parts
Two different colored plastic components used in the interior field should be differentiated.
|
|
|
:
|
APP N° 268
|
Szybki pomiar kąta wychylenia oraz kierunku obrotu tarczy ząbkowanej Czujnik mierzy kąt wychylenia szybko obracającej się tarczy. Dodatkowo kontroluje on kierunek obrotu.
High speed angle measurement with direction control
The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled
|
|
|
:
|
APP N° 267
|
Rozróżnianie koloru puszek z tworzywa Czujnik rozróżnia czerwone i czarne puszki wykonane z tworzywa. Dystans od czujnika do powierzchni puszki zmienia się o kilka mm.
Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
|
|
|
:
|
APP N° 266
|
Detekcja przerwy na czarnej, niemetalicznej taśmie Zadaniem czujnika jest detekcja przerwy na czarnej, niemetalicznej taśmie w sposób optyczny metodą refleksyjną.
Detection of the section point on black nonmetallic strapping
The section point on a shiny black nonmetallic strapping should be detected optically in the reflective way.
|
|
|
:
|
APP N° 265
|
Detekcja czerwonej, błyszczącej etykiety plastikowej Zadaniem czujnika jest detekcja czerwonej, błyszczącej etykiety plastikowej na detalu z czarnego tworzywa.
Detection of a red shiny plastic label
The presence of a shiny red plastic label on a black plastic component should be detected.
|
|
|
:
|
APP N° 264
|
Detekcja czerwonego znacznika na wale aluminiowym Zadanie polega na detekcji czerwonego znacznika na wale aluminiowym (czerwony znacznik informuje o defekcie metalurgicznym). Zdarza się, że farba różni się odcieniem lub znacznik jest częściowo zamazany. Dodatkowo aluminiowa powierzchnia może być zabrudzona rdzą (pochodzącą od opasek stalowych).
Detection of a red color mark on an aluminum rod
The task is to detect a red color mark on an aluminum rod (the red color mark informs about defect metallurgic domains in the aluminum rod). At this, the red paint which is used for color marking can differ and furthermore it can happen that the color mark is partly scraped. In addition an aluminum surface can be contaminated with rust (comes from a steel band, which is used for fixing the rods in a former process), which drifts also into the red color.
|
|
|
:
|
APP N° 263
|
Odróżnianie koloru konsoli środkowej auta Zadaniem czujnika jest odróżnianie koloru konsoli środkowej auta. Dodatkowym utrudnieniem jest błyszcząca powierzchnia detalu.
Color differentiation of a black and brown center console
A black and dark brown plastic center console should be differentiated. It has to be into account, that the surface where the color should be controlled is very shiny.
|
|
|
:
|
APP N° 262
|
Odróżnianie koloru pokrywy schowka konsoli środkowej auta Zadaniem czujnika jest odróżnianie koloru pokrywy schowka konsoli środkowej auta.
Color differentiation between a brown and a black cap in a console
A brown plastic cap should be differentiated from a black plastic cap in a console.
|
|
|
:
|
APP N° 261
|
Kontrola przepełnienia diód LED SMD Zadaniem czujnika jest kontrola przepełnienia przezroczystym tworzywem powierzchni diód LED wykonanych w technologii SMD.
Overfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling.
|
|
|
:
|
APP N° 260
|
Kontrola wypełnienia diód LED SMD Zadaniem czujnika jest kontrola wypełnienia przezroczystym tworzywem powierzchni diód LED wykonanych w technologii SMD.
Underfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with a view to underfilling.
|
|
|
:
|
APP N° 259
|
Kontrola koloru herbatników Czujnik kontroluje kolor ciastek podczas produkcji.
Color control of cookies
During the production of cookies the color should be controlled.
|
|
|
:
|
APP N° 258
|
Kontrola poziomu cieczy w półprzezroczystej rurze Zadanie polega na kontroli poziomu cieczy przy użyciu systemu optycznego. Do zbadania mamy różne rodzaje płynów: wodę, detergenty oraz ciecze o konsystencji mlecznej. Natomiast rura testowa jest zawsze ta sama. Ważne jest aby piana oraz osad nie miały wpływu na pomiar.
Liquid level control from liquid in semi transparent tube
The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level.
|
|
|
:
|
APP N° 257
|
Detekcja bezbarwnego pokrycia na powierzchni uszczelek gumowych Czujnik wykrywa warstwę bezbarwnego pokrycia na powierzchni uszczelek gumowych. Uszczelki występują w kilku rodzajach. Plamka świetlna musi być dostosowana do najmniejszej uszczelki i jednocześnie poprawnie wykrywać największą.
Detection of transparent coating on rubber seals
The coating of rubber seals should be detected. At this, different types should be controlled with the same sensor, thus the spot size of the sensor must fit to the smallest rubber size and should of course deliver proper results from the bigger seals, too.
|
|
|
:
|
APP N° 256
|
Liczenie elementów systemu chłodzenia Czujnik zlicza ilość elementów systemu chłodzenia w pakiecie podczas ruchu pakietu.
Counting of dishes for water cooling systems
The number of dishes in a package should be counted during the movement of the package.
|
|
|
:
|
APP N° 255
|
Detekcja obecności warstwy oleju na metalowym detalu Czujnik kontroluje obecności warstwy oleju na metalowym detalu.
Detection of the presence of an oil film on a turned metal part
The presence of an oil film without gap should be controlled on a turned metal part.
|
|
|
:
|
APP N° 254
|
Detekcja znaków dziurkowanych na powierzchni aluminium Zadaniem czujnika jest detekcja znaków dziurkowanych na powierzchni aluminium.
Detection of punch marks in aluminum surface
Punch marks in aluminum surface should be detected.
|
|
|
:
|
APP N° 253
|
Detekcja niebieskich znaczników tłoczonych w aluminium Czujnik wykrywa niebieskie znaczniki tłoczone w aluminium. Odcień znacznika może się nieznacznie zmieniać, w zależności od gęstości użytej farby.
Detection of a stamped blue mark on aluminum housing
A stamped blue mark should be detected on aluminum housing. At this, the degree of strength of the blue lacquer is changing dependent of the moisture content of the color.
|
|
|
:
|
APP N° 252
|
Detekcja punktu cięcia taśmy Zadaniem czujnika jest detekcja punktu cięcia białej, niemetalowej taśmy optyczną metodą odbiciową.
Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.
|
|
|
:
|
APP N° 251
|
Rozróżnianie kolorów elementów z tworzywa Czujnik rozróżnia elementy kolorowe – szary, czarny i brązowy. Ograniczona przestrzeń wokół detalu wymusza użycie końcówki światłowodowej.
Color differentiation of plastic interior parts
Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor.
|
|
|
:
|
APP N° 250
|
Kontrola warstwy pokrycia na czarnym anodowanym aluminium Zadaniem czujnika jest kontrola warstwy pokrycia na czarnym anodowanym aluminium.
Presence control of a primer on black anodized aluminum
The presence of a primer coating on black anodized aluminum should be controlled.
|
|
|
:
|
APP N° 249
|
Detekcja nakładki maskującej Zadaniem czujnika jest detekcja nakładki maskującej w aluminiowej ramce.
Sealing bead presence control
The presence of a sealing bead on aluminum housing should be controlled. Gaps should be detected.
|
|
|
:
|
APP N° 248
|
Kontrola zwojów sprężyny Czujnik kontroluje odległość między pojedyńczymi zwojami.
Attitude control of an asymmetric spiral spring
The attitude of an asymmetric suppressed spring should be controlled.
|
|
|
:
|
APP N° 247
|
Kontrola obecności włókien węglowych na igle Zadaniem czujnika jest detekcja wiązki włókien węglowych. Dodatkowym utrudnieniem jest ograniczona przestrzeń wokół igły.
Presence control of carbon fibers on a sewing needle
The presence of a carbon fiber bundle on a sewing needle should be controlled. It has to be taken into account, that there is only space for the sensor in the direction of the sewing needle.
|
|
|
:
|
APP N° 246
|
Pomiar połysku łopaty turbiny wiatrowej Czujnik mierzy połysk zewnętrzej warstwy pokrycia łopaty turbiny wiatrowej. Pomiar wykonywany jest bezstykowo. Czujnik zamontowany jest na ramieniu robota, który przesuwając czujnik w pionie dba o właściwą odległość od powierzchni wynoszącą 15mm. Jednocześnie łopata przesuwana jest w poziomie, tak aby zmierzyć połysk na całej powierzchni. Zazwyczaj poziom połysku jest mniejszy niż 5, co gwarantuje spójne przyleganie pokrycia do powierzchni.
Gloss measurement of the primer surface on a vane
The gloss factor of the primer surface of vanes from wind turbines should be measured contactless. At this, the gloss sensor is mounted on a robot and will be moved vertically to make sure, that the distance to the primer surface of the vane remains approximately at 15mm, simultaneously the vane will be moved horizontally so that the gloss factor can be measured along the long axis of the vane. Normally the gloss factor of the primer surface should be lower than 5 in order to guarantee that the following coating get a fix compounding to the primer surface.
|
|
|
:
|
APP N° 245
|
Detekcja kolorowych znaczników na powierzchni światłowodu Zadaniem czujnika jest detekcja kolorowych znaczników na powierzchni światłowodu z prędkością ok. 10 m/s.
Color mark detection on an optical fiber
Color marks should be detected on optical fibers. The rate of feed is around 10m/s.
|
|
|
:
|
APP N° 244
|
Kontrola koloru powłoki światłowodu Czujnik wykrywa kolor powłoki światłowodu. Dodatkowo wszelkie uszkodzenia i zabrudzenia powinny zostać wykryte. Prędkość linii wynosi 10 m/s.
Color control of the coating of an optical fiber
The coating of an optical fiber should be controlled. At this, cuttings and soiling should be detected, even at a product speed of up to 10m/s.
|
|
|
:
|
APP N° 243
|
Detekcja pozycji fluorescencyjnego włókna w materiale Zadaniem czujnika jest detekcja fluorescencyjnego włókna w materiale. Światło UV (od 365nm do 385nm) jest konieczne do wzbudzenia włókna fluorescencyjnego, które emituje światło w widzialnym zakresie w kolorze zielonym.
Position control of a fluorescent thread in a fabric
The position of a fluorescent thread in a fabric should be controlled. UV light (365nm to 385nm) is necessary for excitation of the fluorescent material. The fluorescent material emits light in the visible range (green).
|
|
|
:
|
APP N° 242
|
Detekcja obecności przezroczystej folii Czujnik wykrywa obecność przezroczystej folii. Detekcja przeprowadzana jest z odległości 1m. Dodatkowym utrudnieniem jest drganie folii.
Presence control of an optical transparent plastic film
The presence of a transparent plastic film should be controlled. At this, the distance of the sensor to the plastic film should be in minimum 1m and it should be noticed, that the plastic film can flutter a few millimeters.
|
|
|
:
|
APP N° 241
|
Detekcja znaczników na foliowej etykiecie Czujnik wykrywa czarny znacznik na foliowej etykiecie. Wykrywany kolor musi zostać odróżniony od tła, które jest przezroczyste bądź kolorowe.
Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.
|
|
|
:
|
APP N° 240
|
Pomiar kontrolny promienia krążka Czujnik kontroluje centryczność koła przy wysokich obrotach.
Concentric runout control of a wheel
The concentricity of a high speed wheel should be controlled.
|
|
|
:
|
APP N° 239
|
Detekcja kolorowych znaczników na folii bezbarwnej Czujnik wykrywa kolorowy znacznik na folii bezbarwnej. Ponieważ czujnik pracuje w strefie EX, wykorzystywana jest końcówka z włóknem światłowodowym.
Detection of a color mark on a transparent plastic film
A color mark on a transparent plastic film should be detected. The sensor is used in the Ɛx – range, thus, an optical fiber unit is necessary.
|
|
|
:
|
APP N° 238
|
Detekcja grawerowanej krawędzi rolki Czujnik wykrywa grawerowaną krawędź rolki
Detection of a line engraving on the bearing surface of a pulley
An engraved line on the bearing surface of a black pulley should be detected.
|
|
|
:
|
APP N° 237
|
Kontrola pozycji kolorowego znacznika Czujnik kontroluje pozycję kolorowego znacznika na folii aluminiowej i bezbarwnej. Na wyjściu otrzymujemy sygnał analogowy, proporcjonalny do pozycji znacznika. Ponieważ kolor tła może się zmieniać, konieczny jest czujnik, który umożliwi szybką konfigurację. Dodatkowo wykorzystywana jest zmiana wyjścia cyfrowego, jeśli znacznik przekroczy 50% wielkości plamki (sygnał 5V), pokrywa ją w całości (10V) lub wcale (0V).
Color mark position control
The position of printed color marks on aluminum foils and plastic films should be controlled. At this, the sensor system should deliver an analogue signal which is proportional to the position of the color mark. At this, the color of the background as well as of the color mark can change from batch to batch, which means, that a flexible “easy to handle” system is required. Beside the digital output (a signal change should happen if the light spot is covered by 50% of the color mark) there is an analog output desired, which informs about the actual position of the color mark: 5V means, that the light spot covers to 50% the color mark and 0V and 10V shows, that the light spot falls either only onto the background or onto the color mark.
|
|
|
:
|
APP N° 236
|
Detekcja żył bez izolacji w wiązce kablowej Zadaniem czujnika jest detekcja żył bez izolacji w wiązce kablowej
Detection of uninsulated cables in a twisted cable assembly
Uninsulated cables should be detected in a twisted cable assembly.
|
|
|
:
|
APP N° 235
|
Rozróżnianie kolorów komponentów z tworzywa Zadaniem czujnika jest rozróżnianie 2 kolorów lakierowanych komponentów z tworzywa.
Color differentiation of spray lacquered plastic parts
Two different colored plastic components should be distinguished.
|
|
|
:
|
APP N° 234
|
Detekcja krawędzi materiału Czujnik kontroluje horyzontalną pozycję kratkowanego materiału w zakresie 20mm. Wymagana dokładność ±2mm oraz pasmo sygnału analogowego na poziomie kilku Hz.
Edge detection of a fabric
The lateral position of a wide-meshed fabric should be controlled in a range of 20mm. At this, the necessary accuracy should be ±2mm and the bandwidth of the analogue output signal has to be a few Hz.
|
|
|
:
|
APP N° 233
|
Detekcja fluorescencyjnej etykiety na folii metalowej Zadaniem czujnika jest detekcja papierowych etykiet na spodniej i wierzchniej stronie opakowania z metalowej folii w kolorze srebrnym i złotym. Etykiety świecą w świetle UV.
Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.
|
|
|
:
|
APP N° 232
|
Pomiar średnicy oraz kontrola pozycji szklanej rurki Czujnik wykrywa średnicę oraz pozycję szklanej rurki, detalu wyjściowego do produkcji światłowodu. Typowe średnice mają wartość od 20 do 90mm.
Diameter measurement and position control of glass rods
The diameter as well as the position of glass rods, the starting product of optical fibers, should be measured. Typical diameters of glass rods are in the range of 20mm to 90mm.
|
|
|
:
|
APP N° 231
|
Detekcja rys na przezroczystych zamknięciach Zadaniem czujnika jest detekcja rys na przezroczystych zamknięciach podczas transportu na linii produkcyjnej.
Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.
|
|
|
:
|
APP N° 230
|
Kontrola koloru plastikowych zamknięć przezroczystych Zadaniem czujnika jest kontrola koloru zamknięć z tworzywa. Na linii produkowane są zamknięcia w różnych kolorach (np.: pomarańczowym, fioletowym, magenta). Zadanie polega na kontroli odcienia koloru.
Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.
|
|
|
:
|
APP N° 229
|
Detekcja kolorowych znaczników łożyska ślizgowego Czujnik wykrywa czerwone, zielone i żółte znaczniki oraz ich brak na powierzchni łożyska ślizgowego. Dodatkowym utrudnieniem bywa częściowe zamazanie znacznika.
Detection of color marks on slide bearing shells
Red, green and yellow color marks as well as no color mark on slide bearing shells should be detected and distinguished. It should be taken into account that the color mark should be detected even if it is partially removed.
|
|
|
:
|
APP N° 228
|
Kontrola osiowości koła pasowego Czujnik kontroluje osiowość koła pasowego, a także wymiar x na całym jego obwodzie.
Eccentricity control of belt pulley
The eccentricity of belt pulley should be controlled. The dimension x should be controlled over the whole circle.
|
|
|
:
|
APP N° 227
|
Kontrola średnicy drutów podczas produkcji Zadaniem czujnika jest kontrola drutów o różnej średnicy podczas produkcji.
Diameter control of different wires during the production
The diameter of different metal wires should be controlled during the production process.
|
|
|
:
|
APP N° 226
|
Kontrola koloru holograficznej folii przezroczystej Zadaniem czujnika jest kontrola koloru holograficznej folii przezroczystej na linii produkcyjnej. Kolor może zostać wykryty tylko pod kątem 30 stopni do osi pionowej pod warunkiem prostopadłego oświetlenia powierzchni. Dodatkowo soczewka musi być również ustawiona prostopadle do kierunku przesuwu folii.
Color control of a holographic transparent film
During the production of a holographic transparent film the color should be inline controlled. At this the color can only be detected under an angle of 30° to the vertical axis if the light falls perpendicular onto the holographic film. Furthermore the frontend should be directed perpendicular to the transport direction of the holographic film.
|
|
|
:
|
APP N° 225
|
Rozróżnianie 3 kolorów elementów wykończenia wnętrza Czujnik rozróżnia 3 kolory elementów wykończenia wnętrza.
Color differentiation of three different plastic components in the interior field
Three different colored plastic parts should be differentiated.
|
|
|
:
|
APP N° 224
|
Rozróżnianie grubości ścianek w butelkach z tworzywa Zadaniem czujnika jest rozróżnianie butelek o zmiennej grubości ścianki.
Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.
|
|
|
:
|
APP N° 223
|
Kontrola koloru zatyczki z tworzywa Czujnik kontroluje kolor czerwonej i zielonej zatyczki.
Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
|
|
|
:
|
APP N° 222
|
Sleeve presence control on an injection needle
The presence of a sleeve on an injection needle should be controlled.
|
|
|
:
|
APP N° 221
|
Kontrola obecności smaru w komponentach elektronicznych Zadaniem czujnika jest kontrola obecności smaru na metalowym elemencie wewnątrz komponentu elektronicznego.
Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
|
|
|
:
|
APP N° 220
|
Kontrola struktury kratowej na pasku włókniny Pasek włókniny posiada na wierzchniej stronie przetłoczenie o kratowej strukturze, podczas gdy strona spodnia ma strukturę gładką. W celu rozróżnienia obu stron konieczne jest przeprowadzenie stosownej kontroli.
Lattice texture presence control on a fleece stripe
The presence of a lattice texture on a fleece stripe should be controlled.
|
|
|
:
|
APP N° 219
|
Detekcja linii na półprzezroczystej folii Zadaniem czujnika jest detekcja linii w kolorze złotym na półprzezroczystej folii.
Line detection on printed semi transparent plastic film
A golden colored line should be detected on a semi transparent plastic film.
|
|
|
:
|
APP N° 218
|
Kontrola powierzchni zawiasów Zadaniem czujnika jest kontrola połysku w wybranych miejscach na powierzchni zawiasów.
Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
|
|
|
:
|
APP N° 217
|
Rozróżnianie powierzchni polerowanej od powierzchni szlifowanej płytki szkła Podczas obróbki płytek szklanych konieczne jest rozróżnianie strony polerowanej od szlifowanej.
Differentiation of the polished surface from the grinded surface of a glass plate
During the handling of glass plates the position of the polished surface must be controlled.
|
|
|
:
|
APP N° 216
|
Kontrola obecności arkusza papieru na aluminiowej płytce Zadaniem czujnika jest wykrycie obecności papieru na aluminiowej płytce.
Presence control of a paper sheet on an aluminum plate
The presence of a paper sheet on different colored aluminum plates should be controlled.
|
|
|
:
|
APP N° 215
|
Bezstykowy pomiar grubości arkusza stali Zadaniem czujnika jest bezstykowy pomiar grubości arkusza stali na linii produkcyjnej.
Noncontact thickness measurement of metal sheets
The thickness of metal sheets should be measured, but contactless.
|
|
|
:
|
APP N° 214
|
Detekcja obecności ostatniej warstwy UV pokrycia laminatu Zadaniem czujnika jest detekcja ostatniej warstwy pokrycia laminatu. Warstwa ta świeci w świetle UV.
Detection of the presence of final UV fluorescent coating of laminate
The presence of the upper layer of a laminate should be controlled. At this, the layer is UV fluorescent.
|
|
|
:
|
APP N° 213
|
Detekcja obecności piany w płynie Zadaniem czujnika jest wykrycie piany na powierzchni płynu. Dodatkowo czujnik powinien mierzyć poziom płynu (i piany, jeśli jest obecna).
Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
|
|
|
:
|
APP N° 212
|
Detekcja etykiet fluorescencyjnych na papierze paczki papierosów Zadaniem czujnika jest wykrycie powierzchni styku posiadającej znacznik fluorescencyjny.
Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.
|
|
|
:
|
APP N° 211
|
Kontrola obecności woskowej izolacji na stalowych linach Zadaniem czujnika jest kontrola obecności woskowej izolacji na stalowych linach. Wosk posiada pigment fluorescencyjny.
Presence control of wax coating on steel wire ropes
The presence of wax coating on steel wire ropes should be controlled. The wax is supplied with fluorescent additives.
|
|
|
:
|
APP N° 210
|
Detekcja podwójnych arkuszy przed wejściem do prasy w branży automotive Podczas podawania materiału do prasy zdarza się, że 2 detale ulegną sklejeniu. Zadaniem czujnika jest wykrycie takich sytuacji.
Double sheet control of stamping parts in the automotive industry
During the handling process of stamped metal parts it happens, that instead of one part two or more parts will be sucked up from a robot.
|
|
|
:
|
APP N° 209
|
Kontrola połysku pierścieni tnących Zadaniem czujnika jest kontrola połysku pierścieni tnących w celu rozróżnienia dwóch detali.
Gloss control of cutting rings
The gloss of cutting rings should be controlled. Two components, different in gloss, should be distinguished.
|
|
|
:
|
APP N° 208
|
Detekcja światłoczułego paska na płytce metalowej Czujnik wykrywa światłoczuły pasek na płytce metalowej. Dodatkowym utrudnieniem jest fakt, iż do detekcji nie może być wykorzystane światło widzialne, które naświetliłoby pasek.
Detection of a photosensitive stripe on a metal plate
A photosensitive stripe should be detected on a metal sheet. At this, lightning sources which are working in the visible range cannot be used.
|
|
|
:
|
APP N° 207
|
Detekcja przerwy pomiędzy wkładkami higienicznymi na linii produkcyjnej Zadaniem czujnika jest detekcja przerwy pomiędzy wkładkami higienicznymi transportowanymi pomiędzy dwoma pasami. Czujnik wykrywa zarówno początek jak i koniec wkładki. Jedyny sposób na poprawną detekcję to „patrzenie“ czujnikiem przez pasy transmisyjne.
Detection of a gap between successive hygiene articles during the transportation in a conveyor belt
Panty liners will be transported between two belts. The beginning as well as the end of a panty liner should be detected. Furthermore, a gap between two successive panty liners should be detected. The only practicable possibility is to look through the two conveyor belts.
|
|
|
:
|
APP N° 206
|
Rozróżnianie koloru uszczelek drzwiowych z tworzywa Zadaniem czujnika jest odróżnianie 2 uszczelek drzwiowych występujących w bardzo zbliżonym odcieniu.
Color differentiation of brown plastic door seals
Two different brown colored plastic seals should be differentiated.
|
|
|
:
|
APP N° 205
|
Rozróżnianie koloru pasków z tworzywa Czujnik rozróżnia paski z tworzywa występujące w zbliżonym odcieniu.
Color differentiation of plastic stripes
Different colored plastic stripes should be differentiated.
|
|
|
:
|
APP N° 204
|
Kontrola ułożenia śrub Zadaniem czujnika jest kontrola ułożenia śrub w podajniku.
Detection of the alignment of a screw
The alignment of screws in a mechanical guide should be controlled.
|
|
|
:
|
APP N° 203
|
Kontrola obecności kołnierza igły iniekcyjnej Czujnik kontroluje obecność kołnierza igły iniekcyjnej.
Presence control of the sleeve on an injection needle
The presence of a sleeve should be controlled.
|
|
|
:
|
APP N° 202
|
Detekcja znacznika drukowanego na powierzchni folii aluminiowej Zadaniem czujnika jest detekcja znacznika laserowego na powierzchni folii aluminiowej. Prędkość linii wynosi ok. 60m/min.
Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
|
|
|
:
|
APP N° 201
|
Kontrola koloru plastikowych nakrętek Czujnik kontroluje tolerancję koloru plastikowych nakrętek.
Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.
|
|
|
:
|
APP N° 200
|
Kontrola koloru form PET Czujnik kontroluje różnokolorowe formy PET stosowane w przemyśle opakowań.
Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
|
|
|
:
|
APP N° 199
|
Detekcja znacznika laserowego na folii ALU oraz odróżnianie od paska laserowego Czujnik wykrywa laserowy znacznik referencyjny na błyszczącej folii ALU i odróżnia go od paska laserowego.
Detection of a lasered reference mark on an aluminum foil and differentiation from a lasered stripe
A lasered reference mark on a shiny aluminum foil should be detected. A proper detection of the reference mark should be guaranteed, which means, that the lasered stripe must not be detected as a reference mark.
|
|
|
:
|
APP N° 198
|
Kontrola koloru próbki krwi w labolatorium Zadaniem czujnika jest kontrola gęstości próbek krwi.
Color control of blood in a laboratory glass
Blood in a laboratory glass with different liquid level should be color controlled.
|
|
|
:
|
APP N° 197
|
Kontrola koloru materiału ściernego Zadaniem czujnika jest kontrola koloru materiału ściernego na linii produkcyjnej.
Inline color control of abrasive material
Abrasive band material should be inline color controlled.
|
|
|
:
|
APP N° 196
|
Optyczna kontrola styków elektrycznych w elemencie z tworzywa Błędnie wykonany detal posiada styki częściowo zalane tworzywem. Czujnik powinien wykrywać te styki.
Optical control of electrical contacts on a partly plastic covered stamping part
In the error case the electrical contacts of a stamping part can be slightly covered with a thin plastic film. This should be detected with an optical system.
|
|
|
:
|
APP N° 195
|
Rozróżnianie koloru oleju fluorescencyjnego Czujnik rozróżnia oleje używane w różnych typach silników samochodowych przy wykorzystaniu naturalnej fluorescencji oleju mineralnego. Aby odróżniać konkretne typy oleju stosowane są płynne dodatki UV.
Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
|
|
|
:
|
APP N° 194
|
Detekcja krawędzi w aluminiowej feldze Czujnik wykrywa krawędź aluminiowej felgi. Prędkość obrotowa wynosi ok. 50 obr/min.
Detection of an edge in an aluminum wheel rim
The edge in an aluminum wheel rim should be detected. The speed of the wheel rim is around 50 rpm.
|
|
|
:
|
APP N° 193
|
Detekcja fluorescencyjnych znaczników na matrycy Czujnik wykrywa fluorescencyjny znacznik na górnej części matrycy.
Detection of a fluorescent mark on a metal sheet matrix
A fluorescent mark on the top side of a metal sheet matrix should be detected.
|
|
|
:
|
APP N° 192
|
Kontrola obecności cieńkiej warstwy UV na gumowej uszczelce Gumowa uszczelka drzwi auta jest pokryta cieńką warstwą fluorescencyjną. Zadaniem czujnika jest detekcja tej warstwy.
Control of the presence of a fluorescent film on a rubber lip
A rubber lip for car doors is coated with a thin fluorescent film. The presence of this film should be checked during the production.
|
|
|
:
|
APP N° 191
|
Rozróżnianie koloru czujników ultradźwiękowych Czujnik rozróżnia kolory sensorów ultradźwiękowych montowanych w autach. Dodatkowym utrudnieniem jest bezpośrednie odbicie światła od połyskującej powierzchni.
Color differentiation of ultrasonic sensors
Ultrasonic sensors for the automotive industry should be color differentiated. At this, the shiny surface of the ultrasonic sensors causes normally a high direct reflection.
|
|
|
:
|
APP N° 190
|
Detekcja przerwy w materiale Zadaniem czujnika jest detekcja przerwy w materiale, występującym w różnych kolorach.
Detection of a gap in a fabric
In a fabric a gap should be detected. At this different colored fabric (from dark to bright) are possible.
|
|
|
:
|
APP N° 189
|
Kontrola koloru pozłacanych drutów Czujnik kontroluje kolor pozłacanych przewodów. Dodatkowo powinien wykrywać defekty (ubytki) powierzchni. Prędkość linii wynosi ok. 10 m/s.
Inline color control of a golden coated wire
A golden coated wire should be controlled during the production process. Furthermore, local defects like grooves should be detected. At this, the production speed of the wire is approximately 10 m/s.
|
|
|
:
|
APP N° 188
|
Kontrola koloru izolacji kabli Zadaniem czujnika jest rozróżnianie koloru izolacji kabli (np.: odróżnianie czerwonych od brązowych). Dodatkowym utrudnieniem jest zmiana połysku powierzchni izolacji w zależności od temperatury i wilgotności otoczenia. Dlatego czujnik nie powinien reagować na ww. parametry.
Inline color control of insulated cables
During the production the color of a plastic insulation should be controlled (e.g. brown and red insulated cables). At this the gloss of the plastic surface can be changing due to temperature and humidity changes. Therefore a sensor should be used which is independent of the gloss of the surface.
|
|
|
:
|
APP N° 187
|
Detekcja pozycji etykiety na bezbarwnej folii Czujnik wykrywa pozycję bezbarwnej etykiety na bezbarwnej folii. Prędkość linii wynosi kilka m/s.
Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
|
|
|
:
|
APP N° 186
|
Detekcja spawu na taśmie stalowej Zadaniem czujnika jest detekcja spawu na taśmie stalowej. Zdarza się, że powierzchnia spawu jest zeszlifowana.
Welding line detection on a metal stripe
A welding line on a metal stripe should be detected. At this, the welding line looks different, even a grinded welding line is possible.
|
|
|
:
|
APP N° 185
|
Pomiar połysku szklanej powierzchni panelu fotowoltaicznego Zadaniem czujnika jest pomiar połysku powierzchni panelu fotowoltaicznego podczas produkcji.
Gloss measurement of the glass surface of a photo voltaic panel
The gloss factor of the glass cover of a photo voltaic panel should be measured during the production.
|
|
|
:
|
APP N° 184
|
Rozróżnianie warstw włókniny Czujnik rozróżnia jedną od dwóch warstw włókniny materiału.
Double layer control of fleece material
It should be differentiated between one and two layers of a fleece material.
|
|
|
:
|
APP N° 183
|
Rozróżnianie stron wykładziny wygłuszającej Zadaniem czujnika jest detekcja strony wykładziny wygłuszającej.
Differentiation of front side and back side from a sound damping carpet
The front side should be distinguished from the back side of a sound damping carpet.
|
|
|
:
|
APP N° 182
|
Detekcja kolorowej linii na płycie MDF Czujnik wykrywa czerwoną linię na powierzchni płyty MDF. Zdarza się, że kolor różni się odcieniem i intensywnością. Dodatkowym utrudnieniem są zmiany w gęstości struktury samej płyty w miejscu, w którym naniesiona jest linia.
Detection of a colored line on a MDF plate
A red colored line should be detected on the surface of a MDF plate. At this, the color of the stripe differs in intensity and slightly in color. Furthermore the structure of the MDF surface can also changing from coarse to fine.
|
|
|
:
|
APP N° 181
|
Kontrola koloru drutów miedzianych Zadaniem czujnika jest kontrola jakości drutów miedzianych. Odcień koloru jest proporcjonalny do grubości pokrycia warstwą miedzi.
Color control of brass coated steel wires
The quality of brass coated steel wires should be controlled. At this, the color of the wire delivers information about the thickness of the coating.
|
|
|
:
|
APP N° 180
|
Detekcja perforowanej linii na folii Czujnik wykrywa perforowaną linię na folii. Prędkość linii wynosi kilka m/s, a średnica otworów perforacji to ok. 0.3mm.
Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
|
|
|
:
|
APP N° 179
|
Detekcja szwów na elementach ze skór naturalnych oraz sztucznych Zadaniem czujnika jest detekcja szwu na elementach ze skór naturalnych oraz sztucznych.
Detection of the seam of leather and leather imitation components
The seam of leather and leather imitation components should be detected.
|
|
|
:
|
APP N° 178
|
Detekcja krawędzi etykiety na powierzchni folii Czujnik wykrywa krawędź etykiety na powierzchni folii.
Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.
|
|
|
:
|
APP N° 177
|
Detekcja łączenia felgi Zadaniem czujnika jest detekcja łączenia aluminiowej felgi. Detal obraca się z prędkością 50obr/min.
Detection of a joint on a wheel rim
A joint on an aluminum wheel rim should be detected. At this, the wheel is rotating with a speed of 50 rpm.
|
|
|
:
|
APP N° 176
|
Rozróżnianie kolorów butelek z tworzywa Podczas procesu recyclingu butelek PET konieczne jest ich sortowanie. Nawet jasnoniebieskie butelki muszą być odróżnione od bezbarwnych. Prędkość linii wynosi kilka m/s. Dodatkowym utrudnieniem są krople wody wewnątrz butelek i nieusunięte etykiety.
Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
|
|
|
:
|
APP N° 175
|
Odróżnianie koloru elementów plastikowych różniących się strukturą powierzchni Zadaniem czujnika jest rozróżnianie elementów plastikowych o zmiennej strukturze powierzchni.
Color differentiation of two different structured plastic moldings
Two different structured plastic components should be distinguished. At this, the background color is exactly the same.
|
|
|
:
|
APP N° 174
|
Rozróżnianie syntetycznych skór elementów tapicerowanych Czujnik rozróżnia rozmaite komponenty wyposażenia wnętrza pokryte syntetyczną skórą.
Differentiation of leather imitations of interior automotive components
Different colored interior components should be distinguished.
|
|
|
:
|
APP N° 173
|
Detekcja wycieków na linii spawu Zadaniem czujnika jest wykrycie wycieków w miejscu spawu. Robot rozpyla ciecz we wnętrzu komory zmywarki. Jeśli fluorescencyjna ciecz wypłynie z komory zmywarki zostanie wykryta przez czujnik.
Leak detection of welding lines on dish washers
Leaks should be detected on welding lines of dish washers. At this, a robot equipped with a spray nozzle sprays a fluorescent liquid into the inner chamber of a dish washer. If leaks are present in the welding line, the fluorescent liquid flows through these leaks and can be detected with a fluorescent color detector.
|
|
|
:
|
APP N° 172
|
Precyzyjna detekcja karbów rury aluminiowej Czujnik liczy karby rury aluminiowej poruszającej się z prędkością kilku m/s.
Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.
|
|
|
:
|
APP N° 171
|
Rozróżnianie kolorów tkanin o podobnym odcieniu w branży automotive Zadaniem czujnika jest odróżnianie kolorów tkanin wyposażenia wnętrza auta.
Color differentiation of fabrics in the interior field of the automotive industry
Different fabrics should be distinguished by color control.
|
|
APP N° 170
|
Kontrola średnicy drutów stalowych bez izolacji i z izolacją Czujnik odróżnia średnicę drutu bez izolacji (Ø 50 µm) od drutu z izolacją (Ø 110µm).
Diameter control of a metal wire with and without insulation
The diameter of a wire without insulation (Ø 50µm) should be differentiated from a wire with insulation (Ø 110µm).
|
|
|
:
|
APP N° 169
|
Kontrola koloru posrebrzanych drutów Czujnik umożliwia kontrolę koloru zwojów drutu stalowego w pełnej skali szarości.
Color control of silver colored metal wires
The color as well as the gray scale of a silver colored wire can differ in a coil. To avoid these inhomogenities the wire should be color controlled.
|
|
|
:
|
APP N° 168
|
Odróżnianie koloru listew z tworzywa Czujnik rozróżnia różnokolorowe listwy ozdobne. Powierzchnia detali jest bardzo błyszcząca.
Color differentiation of garnish moldings
Different colored garnish moldings should be distinguished. It has to be taken into account, that the components are very shiny.
|
|
|
:
|
APP N° 167
|
Detekcja znaczników na chłodnicy Podczas montażu chłodnic wadliwe egzemplarze znakowane są niebieską farbą. Czujnik wykrywa znaczniki pomimo różnic w wielkości i intensywności koloru.
Detection of spray marks on the metal surface of water cooler
Defective or damaged water coolers will be marked during the assembling process with a blue spray mark. Intensity and size of the color mark, however, differs extremely.
|
|
|
:
|
APP N° 166
|
Kontrola koloru i kontrastu w paskach papieru zabezpieczającego Czujnik wykrywa kolor i kontrast 2 różnych pasów papieru zabezpieczającego.
Color and contrast control during the printing process of safety paper
During the printing of safety paper the color as well as the contrast should be controlled on two fields on the reference color stripe.
|
|
|
:
|
APP N° 165
|
Kontrola jakości węży prysznicowych Czujnik kontroluje powierzchnię węża prysznicowego. Czerwona wstążka oraz wszelkie przebarwienia powinny zostać wykryte.
Quality inspection of shower hoses
The surface of shower hoses should be controlled. Failures like slight gray tint, gray tint (bloom), yellow tint surfaces (yellowness) but also a metallic overlap and a red ribbon should be detected.
|
|
|
:
|
APP N° 164
|
Pomiar grubości linii spawu oraz polerowanej linii spawu Czujnik kontroluje grubość linii spawu. Przed szlifowaniem spaw musi być właściwie spozycjonowany.
Measurement of the height of a welding line and a polished welding line on a metal sheet
The height of a welding line should be controlled; at this, the presence of the welding line has to be checked before the grinding process and the height of the polished welding line has to be measured after the grinding process.
|
|
|
:
|
APP N° 163
|
Kontrola obecności znacznika UV na uszczelce gumowej Uszczelka gumowa jest pokryta warstwą świecącą na niebiesko w świetle UV. Dodatkowo żółty kolor używany jest do oznaczania wszelkich defektów. Zadaniem czujnika jest wykrywanie tych miejsc.
Presence control of a UV fluorescent yellow coating on a rubber seal
A rubber seal is normally coated with a fluorescent layer. This layer is fluorescent in blue if UV light is used. Additionally to this blue fluorescent coating a yellow fluorescent coating is used for marking defect areas on the rubber seal. The task is now to detect the UV fluorescent yellow coating on a rubber seal, which is primary UV blue coated.
|
|
|
:
|
APP N° 162
|
Kontrola obecności etykiety na wkładkach laktacyjnych Zadaniem czujnika jest kontrola obecności etykiety na wkładkach laktacyjnych.
Presence control of a label on a nursing pad
The presence of a label on a nursing pad should be controlled.
|
|
|
:
|
APP N° 161
|
Kontrola szerokości profili poliuretanowych Czujnik kontroluje szerokość różnokolorowych profili poliuretanowych.
Width control of polyurethane profiles
The width of different colored polyurethane profiles should be measured during the production.
|
|
|
:
|
APP N° 160
|
Kontrola wysokości profili poliuretanowych Czujnik kontroluje wysokość różnokolorowych profili poliuretanowych. Dodatkowym utrudnieniem jest mleczna struktura materiału, która powoduje że światło wnika częściowo w materiał.
Height control of polyurethane profiles
The height of different colored polyurethane profiles should be controlled. It has to be aware that the polyurethane material is slightly milky which means, that light which is directed onto the profile will partly enter the surface.
|
|
|
:
|
APP N° 159
|
Kontrola koloru plastikowych przycisków w branży automotive Czujnik kontroluje kolor guzików z tworzywa. Powierzchnia może układać się pod dowolnym kątem.
Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
|
|
|
:
|
APP N° 158
|
Kontrola pozycji krawędzi bezbarwnej folii Czujnik kontroluje pozycję krawędzi bezbarwnej folii.
Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.
|
|
|
:
|
APP N° 157
|
Odróżnianie metalowej i połyskującej powierzchni pokręteł Czujnik odróżnia błyszczącą powierzchnię pokrętła od matowej.
Differentiation of a matt and a glossy chromate knob
A matt chromate knob should be differentiated from a glossy chromate knob.
|
|
|
:
|
APP N° 156
|
Odróżnianie czarnych i ciemnobrązowych komponentów plastikowych wykończenia wnętrza auta Czujnik odróżnia części różniące się kolorem zarówno z wierzchniej jak i spodniej strony.
Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
|
|
|
:
|
APP N° 155
|
Detekcja kolorowych znaczników na metalowych dyskach Czujnik kontroluje obecność właściwych znaczników na metalowych dyskach. Detale nie posiadające znacznika oraz detale z zamazanym znacznikiem są rozpoznawane i sortowane.
Detection of a proper color mark on a metal disk
The presence of a proper color mark on a metal disk should be detected. The parts with a missing color mark as well as the parts with a color marks which are partly erased should be sorted out.
|
|
|
:
|
APP N° 154
|
Detekcja uchwytów dystansujących żarnika w żarówce Czujnik kontroluje pozycję uchwytów dystansujących żarnika. Z uwagi na ograniczoną przestrzeń w maszynie możemy użyć jedynie czujnika odbiciowego.
Detection of the distance holders of a filament in a bulb
The position of the distance holders of a filament should be controlled. There is only a chance to use a reflective system due to space reasons. The bulb together with the filament and the holders can be moved position controlled.
|
|
|
:
|
APP N° 153
|
Odróżnianie wałka gładkiego od wałka z ząbkowanym pierścieniem Czujnik rozróżnia 2 wałki. Pierwszy posiada płaską powierzchnię cylindryczną, drugi posiada ząbkowany element.
Differentiation between a shaft with and without a tooth system
Two different metal shafts should be differentiated. The one has a flat cylindrical surface whereas the other type comes with a cogwheel.
|
|
|
:
|
APP N° 152
|
Detekcja fluorescencyjnego kleju uszczelniającego Klej fluorescencyjny używany jest do uszczelniania miejsca styku rolki i wałka.
Detection of fluorescent cured glue on a shaft
On a shaft fluorescent glue is used to seal the intersection between the shaft and a roll.
|
|
|
:
|
APP N° 151
|
Odróżnianie połysku skór syntetycznych o zbliżonym kolorze Zadaniem czujnika jest rozróżnianie 2 imitacji skóry oraz pomiar połysku.
Differentiation of leather imitations
Two black leather imitations should be differentiated and the gloss factor should be documented with a gloss measurement device.
|
|
|
:
|
APP N° 150
|
Klasyfikacja mętności wody ściekowej Zadaniem czujnika jest wykrywanie, kontrola i klasyfikacja wody ściekowej. Dzięki zastosowaniu wzierników możliwe jest zanurzanie czujnika w wodzie.
Waste water detection and classification
Waste water should be detected, controlled and classified. For this purpose sight glasses can be used for the measurement or even dipping the optical front end unit into the waste water is also possible.
|
|
|
:
|
APP N° 149
|
Rozróżnianie pomiędzy suchymi i mokrymi płytkami ceramicznymi Zadaniem czujnika jest kontrola ilości środka „nawilżającego” zastosowanego na powierzchni płytki. Płytki są jaśniejsze jeśli ilość środka nawilżającego jest zbyt mała i są ciemniejsze jeśli ilość środka jest zbyt duża.
Differentiation between water moistened and dry floor tiles
After the moisturization the floor tiles should be checked, whether the amount of moisture is in the right range or out of range (too much or too little moisture content). The tiles looks brighter if the degree of moisture is too small and the tiles looks darker as normal if too much water is on the tiles. In the normal case the tiles looks gray in color.
|
|
|
:
|
APP N° 148
|
Detekcja kolorowych znaczników na puszkach z farbą Czujnik wykrywa kolorowe znaczniki na puszkach z farbą. Należy zwrócić uwagę zarówno na tło jak i na linię zgrzewu.
Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.
|
|
|
:
|
APP N° 147
|
Kontrola pozycji sznureczka w tamponie Zadaniem czujnika jest kontrola poprawnej pozycji zielonego sznureczka, który powinien pokrywać prawie całą powierzchnię dna opakowania. Detekcję przeprowadzamy przez bezbarwną folię.
Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.
|
|
|
:
|
APP N° 146
|
Detekcja sęków i ubytków w drewnianych słupkach Czujnik eliminuje słupki drewniane posiadające uszkodzenia powierzchni.
Detection of knots and bark in wooden stakes
Wooden stakes should be produced free of knots and bark.
|
|
APP N° 145
|
Detekcja warstwy ochronnej na powierzchni drutu (stalowego) Czujnik wykrywa obecność pokrycia warstwą ochronną stalowego drutu o średnicy ok. 0,12mm.
Differentiation of coated wires from uncoated wires
Wires of approximately 0.12mm in diameter must be coated and it should be monitored, whether the coating is present or not.
|
|
|
:
|
APP N° 144
|
Kontrola pozycji łat Zadaniem czujnika jest kontrola równoległego ułożenia 4 łat na pasie transmisyjnym.
Position monitoring of tiles
The orientation of tiles on a conveyor belt should be controlled. There are three chamfers which splits the tile into four parts and these chamfers should be perpendicular orientated on the conveyor belt.
|
|
|
:
|
APP N° 143
|
Kontrola ułożenia zapięć Czujnik wykrywa właściwą stronę zapięć Velcro®.
Position monitoring of hook-and-loop fasteners
The orientation of Velcro® fasteners should be controlled.
|
|
|
:
|
APP N° 142
|
Kontrola kierunku skóry syntetycznej Zadaniem czujnika jest kontrola kierunku różnokolorowych skór syntetycznych.
Control of the orientation of leather imitation
The orientation of different colored leather imitations should be controlled.
|
|
|
:
|
APP N° 141
|
Kontrola pozycji podkładek w komponentach plastikowych Zadaniem czujnika jest detekcja właściwej strony podkładek z tworzywa. Kontrola czujnikiem prostopadle do powierzchni podkładki nie jest możliwa z uwagi na ograniczoną przestrzeń w maszynie.
Position monitoring of washers in plastic components
The orientation of washers (backside or front side above) should be checked. To control from the top (perpendicular to the surface) is not possible due to arrangement reasons.
|
|
|
:
|
APP N° 140
|
Kontrola obecności pokrycia na arkuszu stali Czujnik wykrywa warstwę zabezpieczającą arkusz stali.
Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.
|
|
|
:
|
APP N° 139
|
Kontrola pozycji osłony silikonowej Czujnik wykrywa pozycję półprzezroczystej osłony silikonowej.
Position control of a silicon cap
The position of a semi transparent silicon cap should be controlled.
|
|
APP N° 138
|
Kontrola osiowości dysku aluminiowego Zadaniem czujnika jest kontrola osiowości dysku aluminiowego używanego do przewijania taśm. Wymagana dokładność na poziomie 10µm.
Eccentricity control of an aluminum drive disk
The eccentricity of an aluminum driving disk, which is used for winding and rewinding of film strips, should be controlled with an accuracy of approximately 10µm.
|
|
|
:
|
APP N° 137
|
Pozycjonowanie uszczelki gumowej Zadaniem czujnika jest spozycjonowanie wylotu uszczelki gumowej.
Positioning of a rubber seal component
A rubber gasket should be exact positioned.
|
|
|
:
|
APP N° 136
|
Kontrola obecności nadruku na uszczelce gumowej Zadaniem czujnika jest kontrola obecności żółtego nadruku na uszczelce gumowej.
Presence control of an inscription on a rubber seal
On a rubber seal the presence of a yellow inscription should be checked.
|
|
|
:
|
APP N° 135
|
Rozróżnianie koloru sprężyn Zadaniem czujnika jest rozróżnianie koloru sprężyn. Dodatkowym utrudnieniem jest kątowa pozycja zwoju sprężyny.
Color differentiation of three different colored spiral springs
Three different colored spiral spring types should be differentiated. At the position where it should be controlled the position of the coil spring is accidentally oriented.
|
|
|
:
|
APP N° 134
|
Kontrola obecności włókien w rurze aluminiowej Czujnik wykrywa obecność włókien w rurze aluminiowej o długości 160mm i średnicy 14mm. Właściwie wyprodukowany detal jest pozbawiony wspomnianych włókien. Rurę możemy swobodnie ustawiać i obracać o 360 stopni. Po obu stronach rury jest wystarczająca przestrzeń na montaż czujnika.
Control of the presence of fibers in an aluminum tube
In aluminum tubes with a length of approximately 160mm and an inner diameter of 14mm the presence of fibers should be checked, at which a good tube is a tube without any fibers. The tubes can be positioned and turned 360° around, around both ends of the tube there is space enough for mounting the sensors.
|
|
|
:
|
APP N° 133
|
Kontrola koloru elementów skrzyni biegów Po zakończeniu procesu składania skrzyni biegów, czujnik sprawdza poprawność komponentów pod względem koloru.
Color control of different components of a gear box
After the assembling of a gear box, the different components must be controlled in relation to the color.
|
|
|
:
|
APP N° 132
|
Pomiar profilu bloku ściernego Zadaniem czujnika jest kontrola konturów bloku ściernego. Zakres detekcji wynosi 20mm.
Profile measurement of an abrasive block
The contour of a grinding stone should be measured. The necessary measurement range is approximately 20mm.
|
|
|
:
|
APP N° 131
|
Rozróżnianie włókien z tworzywa Czujnik rozróżnia rozmaite, kolorowe włókna z tworzywa o zmiennej grubości.
Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
|
|
|
:
|
APP N° 130
|
Detekcja pasków fluorescencyjnych w folderze reklamowym Czujnik wykrywa pasek fluorescencyjny w ulotce reklamowej. Drukarze otrzymują zamówienia od rozmaitych sieci sklepów. Każdy sklep promuje te same treści, jednak posiada inny adres. Pierwsze 10 ulotek otrzymuje dodatkowe, fluorescencyjne paski, aby wyeliminować błędy podczas pakowania. Paski te są poprawnie wykrywane przez czujnik po przeprowadzeniu procesu uczenia.
Detection of a fluorescent stripe on leaflets
On an advertising material a fluorescent stripe should be detected. Print shops get orders for promotion material from chain of stores. The stores of a chain have exactly the same leaflet except the address of the respective store, thus it must be paid attention during the packaging process in the print shop. At this a fluorescent stripe will be painted onto the first ten leaflets with the other address. At the beginning of the printing process it is possible to teach the sensor onto the fluorescent stripe, thus the fluorescent as well as optical absorption effects from the paper of the advertising material can be compensated.
|
|
|
:
|
APP N° 129
|
Odróźnianie otworów w bloku metalu Zadaniem czujnika jest detekcja otworów w bloku metalu.
Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
|
|
|
:
|
APP N° 128
|
Kontrola koloru lakieru fluorescencyjnego na paczce papierosów Czujnik kontroluje zarówno kolor jak i intensywność fluorescencyjnego lakieru na paczce papierosów. Na paczce znajdują się także inne znaczniki fluorescencyjne. Mają one jednak inną barwę (zieloną) niż znaczniki lakieru (niebieskie).
Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).
|
|
|
:
|
APP N° 127
|
Kontrola średnicy otworów Czujnik kontroluje średnicę otworów w bloku aluminium do wartości 8mm.
Diameter control of holes
The diameter of holes in an aluminum bloc should be controlled. Holes with diameters up to 8mm must be measured.
|
|
|
:
|
APP N° 126
|
Kontrola koloru lakierów Zadaniem czujnika jest kontrola koloru lakieru przy pomocy specjalnej obudowy chroniącej czujnik.
Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.
|
|
APP N° 125
|
Pozycjonowanie żarnika w żarówce Żarnik musi być precyzyjnie umieszczony w żarówce. Zakończenie żarnika może być lekko wygięte, znajdując się poza jego osią. Wewnętrzna średnica żarówki wynosi ok 1,8mm, a średnica żarnika ok. 0,3mm.
Positioning of a filament in a bulb
A filament must be positioned precisely into a bulb. It should be noted that the filament can be bent, thus the end of the filament lies not on the symmetrical axis of the bulb. The inner diameter of the bulb is equal to approximately 1.8mm and the diameter of the filament is around 0.3mm.
|
|
|
:
|
APP N° 124
|
Detekcja arkuszy stalowych na stosie Robot pobiera arkusze ze stosu. Czujnik powinien wykryć pobranie ostatniego arkusza, aby zapobiec pobraniu przez robota podstawy wykonanej z gumy, stali lub płyty MDF.
Detection of a metal sheet on a stack
Metal plates are removed from a stack with a robot. After the last metal sheet is removed a sensor should inform the robot to avoid that the base plate will be sucked up from the robot too. The base plate can consist of MDF (medium density fiberboard), wood, rubber or even a metal which is different from the metal sheet.
|
|
|
:
|
APP N° 123
|
Kontrola podwójnych arkuszy blachy Arkusze blachy są przenoszone z podajnika przez robota po 1 sztuce. Zdarza się, że 2 arkusze skleją się razem. Czujnik wykrywa 2 arkusze kontrolując krawędź blachy. Jest to kontrola w pełni automatyczna bez względu na grubość arkusza.
Double sheet control
Metal plates should be removed from a stack with a robot. The robot sucks the metal sheets one by one and it should be avoided for safety reasons to move two metal sheets simultaneously. A sensor should detect double sheet not from the top but from the side. Furthermore, the system should be adapted automatically after a change of the type of metal sheet (different thickness or different metal).
|
|
|
:
|
APP N° 122
|
Kontrola kierunku kapsułek Zadaniem czujnika jest detekcja kierunku ułożenia kapsułek w mechanicznych prowadnicach. Kapsułki składają się z dwóch elementów, różniących się w wymiarze średnicy o 0,3mm. Prędkość transportu kapsułek wynosi 0,4m/s, a średnice różnią się w zakresie od 3 do 8mm. Kolor kapsułek może zmieniać się w pełnym zakresie – od białego do czarnego. Zdarzają się także kapsułki bezbarwne.
Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
|
|
|
:
|
APP N° 121
|
Kontrola obecności radełkowanych fragmentów blistrów Czujnik sprawdza obecność radełkowania elementów blistra. Błędnie wyprodukowane detale nie posiadają powierzchni radełkowanych.
Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
|
|
|
:
|
APP N° 120
|
Kontrola przezroczystości blistrów Czujnik refleksyjny kontroluje przezroczystość blistrów. Odróżnia 1, 2 lub 3 blistry.
Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.
|
|
|
:
|
APP N° 119
|
Odróżnianie dwóch kolorów na tkaninie zujnik rozróżnia dwa kolory materiałów używanych do produkcji siedzeń samochodowych.
Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
|
|
|
:
|
APP N° 118
|
Detekcja kierunku obrotu aluminiowego bębna Czujnik kontroluje częstotliwość oraz kierunek obrotu aluminiowego bębna wykorzystując zielone, czerwone i niebieskie pola.
Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
|
|
|
:
|
APP N° 117
|
Detekcja linki w bloczku aluminiowym Linka jest nawijana na bloczek aluminiowy. Czujnik kontroluje grubość warstw nawiniętej linki. Z powodu budowy nawijarki czujnik może „patrzeć” jedynie przez boczne otwory w bloczku.
Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
|
|
|
:
|
APP N° 116
|
Kontrola obecności szpatułki w opakowaniu w branży farmaceutycznej Czujnik wykrywa obecność fluorescencyjnej szpatułki w opakowaniu. Podczas testu górna część kartonika pozostaje otwarta.
Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
|
|
|
:
|
APP N° 115
|
Kontrola jakości powierzchni stożka koła zębatego Zadaniem czujnika jest kontrola powierzchni stożka koła zębatego. Powierzchnia prawidłowo wykończona jest jednorodna, podczas gdy błędnie wykończona posiada rowki i przetarcia. Podczas kontroli powierzchni stożek obracany jest wokół własnej osi. Odległość do czujnika wynosi ok 200mm.
Quality control of the surface of a cone on a cogwheel
The surface of the cone on a cogwheel should be checked. The surface of a proper cone looks very homogeneous; the surface of a bad cogwheel shows grooves and scratches. For investigations the cogwheel can be turned around its axis. The distance from the sensor to the object should be around 200 mm.
|
|
|
:
|
APP N° 114
|
Rozróżnianie jedno- i dwukolorowych przewodów Podczas nawijania przewodów czujnik wykrywa przewody jedno- i dwukolorowe. Prędkość nawijarki wynosi 15m/s, a przewód obraca się wokół własnej osi w czasie 0,5 sek/obrót. Detekcja ma miejsce podczas tego obrotu. Najmniejsza średnica przewodu wynosi 1,35mm, a największa 3mm. Do produkcji dwukolorowych przewodów, na powierzchni przewodu jednokolorowego nanosi się pasek z drugim kolorem o szerokości 0,8mm. W związku z tym wielkość plamki do detekcji dwukolorowych przewodów ma średnicę 0,7mm.
Differentiation between single-colored and two-colored cables
During the coiling process of cables it has to be checked, whether monochromatic or dichromatic cables will be winded. At this the cables will be transported with a speed of 15 m/s and the cable will be turned 360° in 0.5 seconds around the axis. This turn around its axis can be used for color control. The smallest diameter of the cables is Ø 1.35 mm and the biggest diameter is around Ø 3mm. To produce a two-colored cable, a single-colored cable is used and a line with a width of approximately 0.8mm will be painted onto the cable, hence a white light spot with a diameter of Ø 0.7mm is used for color control.
|
|
|
:
|
APP N° 113
|
Rozróżnianie koloru kół zębatych Czujnik odróżnia koła zębate z pokryciem i bez pokrycia specjalną (czarną) warstwą zabezpieczającą. Odległość do detalu wynosi ok. 160mm.
Color differentiation of cogwheels
The task is to differentiate between black coated and non-coated cogwheels. Furthermore the minimum distance from the sensor to the object should be 160mm.
|
|
|
:
|
APP N° 112
|
Kontrola pozycji stalowego ostrza w strefie EX Zadaniem czujnika jest kontrola pozycji stalowego ostrza w strefie EX.
Position control in the Ɛx range
The position of a metal blade should be controlled in the Ɛx range over a measuring range of approx. 6mm.
|
|
|
:
|
APP N° 111
|
Kontrola kropli laserową barierą jednodrogową Czujnik kontroluje ilość oraz wielkość kropli.
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
|
|
|
:
|
APP N° 110
|
Kontrola gęstości strumienia rozpylacza ciśnieniowego w strefie EX Do kontroli gęstości strumienia rozpylacza ciśnieniowego w strefie EX (strefa 0) najlepiej sprawdzi się system bez elektronicznych elementów wyposażony w głowice z włókna szklanego.
Spray jet control in the Ɛx range
For the spray jet control in the Ɛx range (zone 0) the most suitable system is a unit which comes without electronically components in the Ɛx zone, but with fiber optics.
|
|
|
:
|
APP N° 109
|
Detekcja spawu na metalowej obejmie Czujnik wykrywa spaw na metalowej obejmie. Podczas pomiaru obejma jest obracana wokół własnej osi.
Detection of a welding line on a metal ring
The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around.
|
|
|
:
|
APP N° 108
|
Kontrola supłów podczas produkcji żyłki z tworzywa Czujnik wykrywa zarówno supły (spętlenia) jak i inne uszkodzenia żyłki z tworzywa. Żyłka występuje w różnych średnicach, prędkość podajnika na poziomie kilku m/s.
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
|
|
|
:
|
APP N° 107
|
Kontrola grubości nóżek komponentów elektronicznych Czujnik kontroluje grubość nóżek komponentów elektronicznych.
Pin width control of electrical components
The width of the pins of an electrical component should be controlled.
|
|
|
:
|
APP N° 106
|
Kontrola wysokości nóżek komponentów elektronicznych Czujnik kontroluje wysokośc nóżek komponentów elektronicznych podczas ich produkcji.
Pin height control of electrical components
The height of the pins of an electrical component should be controlled during the production.
|
|
|
:
|
APP N° 105
|
Kontrola gęstości strumienia rozpylacza ciśnieniowego Czujnik kontroluje gęstość strumienia rozpylacza ciśnieniowego.
Spray jet amount control
The density of the spray jet should be controlled.
|
|
|
:
|
APP N° 104
|
Kontrola średnicy drewnianego kija Czujnik kontroluje średnicę drewnianego kija podczas produkcji.
Inline diameter control of wooden staff
During the production of wooden staff the diameter must be controlled while the rod is moved.
|
|
|
:
|
APP N° 103
|
Kontrola ilości blistrów opakowań Zadaniem czujnika jest wyeliminowanie sytuacji, gdy maszyna obrabia 2 przypadkowo sklejone blistry.
Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.
|
|
|
:
|
APP N° 102
|
Kontrola pozycji spirali na żarniku Czujnik wykrywa pozycję zwoju spirali żarnika w procesie produkcji żarówek. Występują 2 różne typy spiral, różniące się odstępem między zwojami. Prędkość linii wynosi ok. 0,02m/s, średnica żarnika zależy od typu – od 0,3mm do 1,5mm. Maksymalny odstęp między zwojami wynosi 1mm.
Spiral position control on a filament
The position of the spiral coil on a filament for the light bulb industry must be controlled. There are two different types of spirals, different in gapping, on the filament. The speed of the filament is approximately 0.02m/s, the diameter of the filament is dependent of the type (min. 0.3mm and max. 1.5mm) and the maximum gapping of the spiral is 1mm.
|
|
|
:
|
APP N° 101
|
Kontrola strumienia rozpylacza ciśnieniowego podczas matowienia szkła w przemyśle farmaceutycznym Podczas produkcji butelek szklanych dla przemysłu farmaceutycznego, wewnętrzna warstwa szkła pokrywana jest specjalną warstwą chemiczną podawaną do środka butelki przez szyjkę za pomocą rozpylacza ciśnieniowego. Podczas tego procesu butelka ma nadal temp kilkuset stopni Celsjusza.
Spray-jet control during the glass bottle coating process in the pharmaceutical industry
During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade.
|
|
|
:
|
APP N° 100
|
Pomiar połysku drzwi po procesie lakierowania Współczynnik połysku musi być skontrolowany zaraz po zakończeniu procesu lakierowania. Testy wykazały, że ilość lakieru naniesionego na powierzchnię drzwi wpływa na poziom połysku. Przy zbyt małej ilości lakieru powierzchnia staje się chropowata.
Gloss inline measurement after the varnish of doors
Immediately after the varnish of the doors the gloss factor should be controlled. Tests have shown that the amount of varnish, which will be sprayed onto the door surface, influences the gloss factor. If not enough varnish is used the surface becomes rough.
|
|
|
:
|
APP N° 99
|
Rozróżnianie połysku komponentów wnętrza auta Czujnik rozróżnia połysk komponentów wnętrza auta. Różnica w kolorze pomiędzy elementami jest niewielka, jednak różnica w połysku pozwala je odróżnić z uwagi na strukturę powierzchni.
Color gloss differentiation of door interior components
Different colored interior parts must be differentiated. The color differences between the respective components are relatively small but there is a good difference in the gloss factor due to the different structure of the part.
|
|
|
:
|
APP N° 98
|
Detekcja oleju w wodzie Czujnik kontroluje ilość oleju w przepracowanej wodzie w prasie olejowej. Typowa wartość to 500ppm oleju w wodzie. Celem jest osiągnięcie 100ppm. Wykorzystywany jest efekt fluorescencyjny oleju.
Oil containing waste water detection
On an oil press the amount of oil in the waste water must be controlled. Typical values are 500ppm of flux oil in the waste water and the goal is to reach the 100ppm. At this the fluorescent effect of the flux oil can be used.
|
|
|
:
|
APP N° 97
|
Kontrola obecności filcowej podkładki podczas montażu deski rozdzielczej Zadaniem czujnika jest kontrola obecności filcowej podkładki podczas montażu deski rozdzielczej. Dodatkowo czujnik powinien rozróżniać 2 odcienie koloru podkładki.
Presence control of felt textile on dashboard components
On dashboard instruments the presence of felt must be controlled furthermore two felts must be differentiated.
|
|
|
:
|
APP N° 96
|
Rozróżnianie wierzchniej i spodniej strony zamknięcia Podczas produkcji opakowań chusteczek nawilżanych konieczna jest kontrola strony zamknięcia.
Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
|
|
|
:
|
APP N° 95
|
Kontrola banderoli na paczkach papierosów Zadaniem czujnika jest kontrola obecności banderoli na paczkach papierosów. Kontrola odbywa się w miejscu, gdzie paczka jest już zafoliowana.
Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.
|
|
|
:
|
APP N° 94
|
Inspekcja perforowanego papieru w przemyśle tytoniowym Podczas laserowej perforacji papieru zdarza się, że wokół perforowanych otworów dochodzi do przypaleń papieru. Z większej odległości wygląda to jak szare pasy. Czujnik kontroluje powierzchnię perforacji pod względem odcienia koloru i jego intensywności. Odróżnia brak papieru od poprawnej perforacji, a także kilku poziomów przypaleń.
Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.
|
|
|
:
|
APP N° 93
|
Rozróżnianie błyszczących i matowych elementów chromowanych Zadaniem czujnika jest rozróżnianie chromowanych elementów matowych od błyszczących. Detal ma zawsze ten sam rozmiar. Przestrzeń przeznaczona na montaż czujnika ma tylko 8mm wysokości.
Differentiation of chrome plated shiny and chrome plated matt components
Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end.
|
|
|
:
|
APP N° 92
|
Rozróżnianie kolorów osłonek igły Zadaniem czujnika jest zarówno detekcja obecności osłonki igły jak i kontrola koloru w zadanym zakresie.
Color differentiation of syringe capsules
Syringe capsules must be color differentiated. At this, there should be detected also an unacceptable color change from batch to batch of the same capsule type.
|
|
|
:
|
APP N° 91
|
Rozróżnianie jedno- i dwukolorowych przewodów Podczas produkcji przewodów konieczne jest rozróżnianie ich kolorów. Prędkość linii wynosi ok. 15m/s, a średnica najmniejszego przewodu wynosi 1,35mm. Dodatkowo przewód obraca się wokół własnej osi z prędkością 0,5 sekundy/obrót. Szerokość paska drugiego koloru w przewodach dwukolorowych wynosi 0,8mm.
Differentiation of a unicolor and a bicolor cable
During the production of cables a differentiation between unicolor and bicolor cable is necessary. The production maximum speed of the cable is approximately 15m/s and the diameter of the smallest cable is around 1.35mm. The cable is rotating around the axis in 0.5 seconds 360° at this velocity. The color stripe of the bicolor cable has a width of about 0.8mm.
|
|
|
:
|
APP N° 90
|
Kontrola obecności korka w butelkach wina Zadaniem czujnika jest kontrola obecności korka w butelkach wina. Kolor butelek, a także ich wysokość może się lekko zmieniać w niewielkim zakresie. Dodatkowym utrudnieniem jest zmiana koloru samego korka w zależności od dostawcy.
Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.
|
|
|
:
|
APP N° 89
|
Detekcja kolorowych znaczników na banderoli Wykrywanym obiektem jest biały znacznik na kolorowym pasku banderoli. Dla różnych nominałów banknotów stosowane są różne kolory pasków np.: żółte, brązowe, czerwone, zielone fioletowe i szare. Prędkość linii wynosi max. 10m/s. Wielkość znacznika: 6mm x 4mm. Czujnik powinien z dużą dokładnością informować o pozycji znacznika.
Color mark detection on a paper banderole
A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark.
|
|
|
:
|
APP N° 88
|
Detekcja fluorescencyjnego kleju na pasach ściernych Zadaniem czujnika jest detekcja fluorescencyjnego kleju podczas produkcji pasów ściernych. Szerokość pasa kleju wynosi 10mm. Wykrywana jest zmiana większa niż 2mm. Odległość czujnika od powierzchni wynosi 20mm, plamka ma rozmiar 2mm x 10mm.
Fluorescent glue control on an abrasive belt
During the production of abrasive belt material with a 10mm wide glue stripe the presence of the fluorescent glue must be observed. Defects greater than 2mm in length must be proper detected. The distance of the sensor head to the object should be approximately 20mm and the detecting range around 2mm x 10mm.
|
|
|
:
|
APP N° 87
|
Pomiar połysku pasów ściernych Poziom połysku jest istotnym wyznacznikiem jakości pasa ściernego. Dlatego istotny jest dobór właściwego czujnika.
Inline gloss measurement on abrasive belts
The gloss factor is a significant parameter for the surface quality, the roughness, of an abrasive belt. Thus a gloss measurement inline sensor should be used for quality control of the abrasive surface.
|
|
|
:
|
APP N° 86
|
Detekcja różnokolorowych elementów z tworzywa sztucznego o zróżnicowanym kształcie Zadaniem czujnika jest rozróżnianie elementów z tworzywa sztucznego o zróżnicowanym kształcie.
Differentiation of different colored plastic parts with different number of bars
Plastic parts with four (the bar located in the middle is shorter) and five long bars must be distinguished independent of the color.
|
|
|
:
|
APP N° 85
|
Detekcja białej taśmy na różowej tkaninie poduszki powietrznej Zadanie polega na detekcji białej taśmy na różowej tkaninie poduszki powietrznej. Dodatkowym utrudnieniem jest zmienna paleta kolorów tkanin poduszek powietrznych.
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
|
|
|
:
|
APP N° 84
|
Rozróżnianie czarnej i niepowlekanej powierzchni koła zębatego Rozróżnianie koloru dotyczy zębatek czarnych oraz niepowlekanych. Odległość od czujnika do detalu wynosi 160mm. Plamka powinna mieć średnicę ok. 3mm.
Color differentiation between a black and an uncoated metal gear wheel
A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter.
|
|
|
:
|
APP N° 83
|
Rozróżnianie szwów na tkaninie poduszki powietrznej Zadaniem czujnika jest rozróżnianie kolorów szwów na tkaninie poduszki powietrznej. Zdarza się, że szwy są dwukolorowe.
Differentiation of threads on an airbag textile
Different colored threads must be differentiated. At this, the treads can be also bicolored.
|
|
|
:
|
APP N° 82
|
Detekcja kolorowych znaczników na uszczelce gumowej Zadaniem czujnika jest detekcja żółtego znacznika na uszczelce gumowej.
Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
|
|
|
:
|
APP N° 81
|
Kontrola pozycji paska klinowego Zadaniem czujnika jest kontrola pozycji paska klinowego na kole pasowym.
V-belt position control
The lateral displacement of a V-belt in a V-belt pulley must be controlled, because it happens that the V-Belt lies not properly in the V-belt pulley.
|
|
|
:
|
APP N° 80
|
Rozróżnianie koloru elementów wyposażenia wnętrza auta W przemyśle samochodowym konieczne jest rozróżnianie rozmaitych elementów wyposażenia wnętrza auta (drewnianych, plastikowych oraz metalowych). Niektóre drewniane i plastikowe elementy są bardzo błyszczące, co dodatkowo utrudnia detekcję.
Color differentiation of interior equipment
In the automotive industry different interior parts (wooden as well as plastic and metal elements) must be differentiated. Some wooden and plastic elements are very glossy whereas other components are diffuse.
|
|
|
:
|
APP N° 79
|
Rozróżnianie łożysk kulkowych Zadaniem czujnika jest rozróżnianie łożysk tej samej wielkości o różnym kolorze. Występują zarówno łożyska z wkładką w kolorze złotym jak i srebrnym. Minimalna odległość od czujnika wynosi 160mm.
Differentiation of ball bearings
Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm.
|
|
|
:
|
APP N° 78
|
Liczenie torebek papierowych Podczas produkcji torebek papierowych konieczna jest kontrola ilości przed pakowaniem. Zakres detekcji może zmieniać się w zakresie 80mm, a prędkość linii może wynosić nawet 50.000 torebek na godzinę. Dodatkowym utrudnieniem jest zmienna odległość między krawędziami torebek.
Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.
|
|
|
:
|
APP N° 77
|
Kontrola krawędzi pasa ściernego Krawędź pasa ściernego musi być zeszlifowana pod odpowiednim kątem. Zadaniem czujnika jest kontrola tego kąta.
Edge control of abrasive belts
The edges of abrasive belts must be grinded to a certain degree. Thus, the degree of grinding should be controlled.
|
|
|
:
|
APP N° 76
|
Detekcja znacznika fluorescencyjnego na nakrętkach w branży farmaceutycznej Nakrętka oryginalnego produktu jest dodatkowo oznaczana fluorescencyjnie, a następnie kontrolowana podczas pakowania. Pozwala to odróżnić produkt od podróbek.
Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.
|
|
|
:
|
APP N° 75
|
Detekcja kolorowych znaczników w przemyśle drukarskim Trapezowe znaczniki są nadrukowane jako punkty referencyjne dla każdego koloru i synchronizowane ze znacznikiem czarnym.
Color mark detection for side and longitudinal register control in the printing industry
In the web offset printing trapezoid like color marks will be used for the side register as well as the longitudinal register control. For each color a color mark is used, at which all color marks will be synchronized to the black color mark.
|
|
|
:
|
APP N° 74
|
Pomiar połysku laminatów Pomiar połysku powierzchni laminatu na linii produkcyjnej.
Inline gloss measurement of plastic films and laminated plates
During the production of plastic films as well as of laminated plates the gloss factor should be measured.
|
|
|
:
|
APP N° 73
|
Rozróżnianie kolorów ogniw fotowoltaicznych Kolor ogniw fotowoltaicznych może się różnić w zależności od zastosowanego procesu produkcji czy nawet produkcji na różnych liniach w tej samej fabryce. Czujnik umożliwia kontrolę koloru ogniwa.
Color differentiation of solar photo cells
The blue color of solar photo cells can differ due to the production process from factory to factory and even from line to line in the same factory. Thus, the color of the solar photo cells should be controlled.
|
|
|
:
|
APP N° 72
|
Detekcja proszkowanej powłoki na arkuszu folii wzmocnionej włóknem szklanym Zadaniem czujnika jest detekcja grubości proszkowanej powłoki pokrywającej pasek folii wzmocniony włóknem szklanym.
Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
|
|
|
:
|
APP N° 71
|
Kontrola pozycji folii przezroczystej Zadaniem czujnika jest kontrola pozycji przezroczystej folii w zakresie 50mm.
Optical transparent plastic foil position control
The position of an optical transparent plastic film should be controlled in a range of approximately 50mm.
|
|
|
:
|
APP N° 70
|
Detekcja znacznika grawerowanego na metalowej płytce Zadaniem czujnika jest detekcja znacznika grawerowanego na metalowej płytce w celu pozycjonowania płytki na kolejnych stanowiskach obróbczych.
Detection of an engraving mark on a metal plate
An engraving mark which is used for positioning in x-, y- and roll-direction has to be detected.
|
|
|
:
|
APP N° 69
|
Kontrola pozycji krawędzi arkusza papieru Pozycja krawędzi arkusza papieru musi być kontrolowana w zakresie 50mm. Na wyjściu otrzymujemy sygnał 0..10V proporcjonalny do aktualnie wykrytej pozycji.
Paper edge position control
The position of the edge of a paper line must be controlled in a range of 50mm. The system should deliver an analogue signal (0V … +10V) which is proportional to the position of the edge of the paper.
|
|
|
:
|
APP N° 68
|
Detekcja fluorescencyjnego paska w gazecie Egzemplarze z błędami nadruku zostają oznaczone paskiem fluorescencyjnym. Detekcja paska umożliwia ich automatyczne odrzucenie.
Fluorescence stripe detection on newspapers
Newspapers with quality defects will be marked with a fluorescence stripe. These newspapers must be automatically detected and rejected from the normal product stream.
|
|
|
:
|
APP N° 67
|
Kontrola połysku w przemyśle meblowym Podczas procesu produkcja drzwi, zaraz po nanoszeniu koloru (farby) konieczna jest kontrola połysku powierzchni.
Inline gloss control in the furniture industry
During the manufacturing process of doors just after the painting line the amount of color must be controlled.
|
|
|
:
|
APP N° 66
|
Kontrola koloru w przemyśle meblowym Podczas produkcji drzwi konieczna jest kontrola koloru. Czujnik sprawdza kolor zaraz po naniesieniu farby przez dysze pod ciśnieniem, przed przejściem do komory suszenia.
Color monitoring in the furniture industry
During the manufacturing process of doors the color must be controlled and monitored. At this the color will be sprayed with spray nozzles, which are mounted on a robot, onto the doors. Just after this process but before the drying process the color should be controlled.
|
|
|
:
|
APP N° 65
|
Detekcja znaków wodnych na zabezpieczonych papierach Zadaniem czujnika jest detekcja pozycji znaków wodnych. W procesie produkcji konieczne jest synchronizowanie pozycji kolejnych warstw nadruku.
Detection of a reference water mark on safety paper
The position of a reference water mark must be inline detected. During the printing process it is necessary to synchronize the consecutive registers to the reference water mark.
|
|
|
:
|
APP N° 64
|
Rozróżnianie kolorów rur z pokryciem i bez pokrycia Zadaniem czujnika jest detekcja pokrycia wewnętrznej strony rury. Pokrycie daje lekko żółtawe zabarwienie, podczas gdy powierzchnia bez pokrycia ma srebrny kolor.
Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
|
|
|
:
|
APP N° 63
|
Super szybka detekcja znaczników holograficznych w przemyśle drukarskim Jedną z właściwości znaczników holograficznych jest bezpośrednie odbicie skolimowanego światła pod pewnym kątem. Dla większości znaczników kąt ten wynosi 45 stopni i skolimowany promień światła jest odbity prostopadle od powierzchni folii. Zjawisko to można wykrywać zarówno na foliach przezroczystych jak i metalizowanych.
Super fast detection of holographic reference marks in the printing industry
One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils.
|
|
|
:
|
APP N° 62
|
Kontrola koloru przyciemnianych szyb Podczas montażu elementów auta konieczna jest kontrola koloru szyb bocznych. Można ją przeprowadzić tylko z 1 strony bez dodatkowego oświetlenia.
Color control of tinted glass plates
During the assembling of cars the color of the glasses from the side door must be checked. It is only possible to control from one side and even an additional reflector cannot be used.
|
|
|
:
|
APP N° 61
|
Rozróżnianie kolorów szkła Zadaniem czujnika jest rozróżnianie kolorów szkła barwionego i przyciemnianego.
Color differentiation of tinted and colored glass plates
During the subsequent processing of glass plates the different tinted and colored glasses must be controlled and discerned.
|
|
|
:
|
APP N° 60
|
Rozróżnianie kolorów fluorescencyjnych płynów i znaczników Dostępne na rynku czujniki fluorescencji potrafią wykrywać zazwyczaj tylko intensywność, niestety nie wykrywają koloru. Dodatkowym problemem jest detekcja słabych kolorów fluorescencyjnych lub detekcja z odległości większej niż 80mm w sztucznym świetle. Wszystkie powyższe problemy rozwiązuje właściwy czujnik fluorescencji z oferty Sensor Instruments.
Color differentiation of fluorescent liquids and marks
Available fluorescent sensors so far detect only the intensity of a fluorescent object but not the color. Furthermore these sensors have a problem to detect very weak fluorescent objects or fluorescent objects at a distance more than 80mm and additionally they are sensitive against ambient light. For the purpose of fluorescent color mark detection a color sensor for fluorescent colors should be used.
|
|
|
:
|
APP N° 59
|
Kontrola pozycji tafli szkła Maszyna obrabiająca szkło musi być informowana nie tylko o odległości do tafli szkła, ale także o pozycji krawędzi. Jest to utrudnione ponieważ krawędź nie jest sfazowana. Współczynnik odbicia wynosi zazwyczaj 4%, dodając odbicie drugiej warstwy otrzymujemy maksymalnie 8% odbitego światła.
Position measurement of a transparent glass plate
Glass handling machines must be informed not only about the distance of a glass plate but also about the edge position of a glass plate. However the detection of the edge of a transparent glass plate is not so easy, especially if there is nearly no phase on the edges. The direct reflection rate of visible light on a standard glass surface is normally approximately 4% and with the additional reflection of the second surface around 8% of the light will be reflected.
|
|
|
:
|
APP N° 58
|
Pomiar odległości do tafli szkła Podczas procesu fazowania krawędzi płyty szkła konieczna jest kontrola odległości do płyty, tak aby krawędzie były obrabiane pod tym samym kątem. Ponieważ powierzchnia szkła bardzo słabo odbija światło, nie możemy użyć standardowego czujnika laserowego.
Distance measurement on transparent glass plates
During the handling process of glass plates the distance of the glass surface must be controlled. As during the beveling process the glass plate must be positioned in a way that the glass edges can be feed symmetrically into the abrasive block of the grinding machine, otherwise the phases on both sides of the glass plate are different. Due to the fact, that the glass surface delivers nearly no diffuse reflected light but only direct reflected light, a standard laser displacement sensor cannot be used.
|
|
|
:
|
APP N° 57
|
Detekcja fluorescencyjnego znacznika na powierzchni tłoczonych pianek Zadaniem czujnika jest detekcja fluorescencyjnego znacznika na powierzchni różnokolorowych pianek tłoczonych.
Detection of a fluorescent line on different colored foamed materials
A fluorescent line must be detected on different colored foamed materials.
|
|
|
:
|
APP N° 56
|
Pomiar różnicy wysokości holograficznych dysków enkodera Zadaniem czujnika jest bezdotykowa kontrola odległości do powierzchni holograficznego dysku enkodera.
Measurement of the height difference of holographic encoder disks
The height of holographic encoder disks must be controlled in a non contact way.
|
|
|
:
|
APP N° 55
|
Kontrola koloru emulsji Zadaniem czujnika jest kontrola koloru emulsji z uwzględnieniem niewielkich zmian odcienia na lekko czerwony lub lekko zielony.
Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
|
|
|
:
|
APP N° 54
|
Kontrola punktu spawu Spawanie punktowe jest bardzo popularne, szczególnie wśród producentów modułowych płytek PCB. Głowica piezo podaje bardzo małą kroplę wielkości dziesiątych części milimetra. Zadaniem czujnika jest kontrola obecności tej kropli.
Soldering flux control during the selective flux application
Selective soldering in combination with selective flux application becomes more and more popular. Especially manufacturers of mixed assembled PCB boards benefit from this new technology. Only the areas which will be soldered will be covered from the soldering flux. To achieve this, a piezo nozzle is used to generate small flux droplets with a diameter of a few tenth of a millimeter. At this the scattering angle is very small which make sure, that the droplets strike only the scheduled area. The amount as well as the direction of the droplets should be controlled.
|
|
|
:
|
APP N° 53
|
Odróżnianie połysku powierzchni skóry naturalnej i jej imitacji używanych we wnętrzu auta Zdarza się, że materiały posiadają identyczny kolor. Możliwe jest zastosowanie czujnika wykrywająćego niewielkie różnice w połysku powierzchni materiału.
Color-gloss differentiation of leather and leather imitations in the automotive interior field
In the automotive interior field the different materials looks sometimes very similar. For a proper differentiation of the different products color-gloss detection should be used.
|
|
|
:
|
APP N° 52
|
Odróżnianie odcieni skóry naturalnej i syntetycznej używanej we wnętrzu auta Czasami nie jest możliwe odróżnianie materiałów posiadających identyczny kolor i połysk. Należy wtedy zastosować odpowiedni czujnik rozróżniający strukturę materiału.
Differentiation of leather and leather imitations in the automotive interior field
Sometimes a color differentiation between interior materials with exactly the same color and the same gloss factor is not possible, even with the best color sensor. Thus another sensor must close this gap. Indeed the different materials may have the same color and the same gloss, but a different structure as shown in the photos.
|
|
|
:
|
APP N° 51
|
Kontrola marginesu pasa ściernego Rozmaite pasy ścierne posiadają margines, który powinien być kontrolowany. Może on występować zarówno na wierzchniej jak i spodniej stronie. Margines jest ciemniejszy niż strona spodnia i jaśniejszy niż wierzchnia. Pozwala to na poprawną detekcję.
Control of margined abrasive belts
Different sanding belts are equipped with a margin and this margin has to be controlled. The margin can be present on the sanding side of the abrasive belt or on the rear side. Furthermore the margin can be darker than the rear side but mostly it is brighter than the sanding surface. Nevertheless there is a sufficient difference in contrast between the margin and the rear side or the sanding side.
|
|
|
:
|
APP N° 50
|
Detekcja koloru obecności spawu Czujnik wykrywa obecność spawu na opasce przewodzącej podczas produkcji ogniw fotowoltaicznych.
Color control of the presence or absence of the flux
During the assembling process of photovoltaic cells on a stringer machine the conduction band must be controlled in respect of the presence or absence of the soldering flux.
|
|
|
:
|
APP N° 49
|
Kontrola osiowości wałka elektrycznej szczoteczki do zębów Kontrolowana jest zarówno częstotliwość jak i amplituda osiowości wałka elektrycznej szczoteczki do zębów.
Control of the eccentricity of the shaft of an electrical tooth brush
The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled.
|
|
|
:
|
APP N° 48
|
Kontrola koloru diody LED Zadaniem czujnika jest kontrola koloru diody LED szczoteczki elektrycznej, co pozwala na test czasu załączenia/wyłączenia diody.
LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
|
|
|
:
|
APP N° 47
|
Detekcja kolorowych znaczników UV na płytach drewnianych Markery UV stosowane są do oznaczania miejsc uszkodzeń w drewnie. Zazwyczaj szerokość znacznika wynosi 15mm. Zdarza się, że znaczniki leżą bardzo blisko siebie, ale muszą zostać wykryte jako oddzielne uszkodzenia. Czujnik umożliwia detekcję z odległości nawet 200mm, pasków o szerokości minimalnej 5mm.
Color detection of fluorescent marks on wood plates
On wooden plates defects will be marked with a fluorescent marker. The fluorescent mark has normally a width of about 15mm and it can happen, that two of this marks lie 20 mm away of each other, but must be detected as two separate marks. Furthermore the fluorescent marks should be detected at a distance of 200 mm to the object and even a mark with a width of 5mm should be detected.
|
|
|
:
|
APP N° 46
|
Detekcja kolorowych znaczników na rurkach aluminiowych Zadaniem czujnika jest detekcja czerwonego znacznika naniesionego sprayem na powierzchnię rurki aluminiowej. W innym przypadku czujnik wykrywa pozycję czarnego nadruku.
Color mark detection on aluminum tubes
A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too.
|
|
|
:
|
APP N° 45
|
Detekcja kolorowych znaczników na przewodach stalowych Podczas procesu spawania dwóch stalowych przewodów, miejsce spawu oznaczane jest kolorem niebieskim lub czerwonym, aby ułatwić detekcję spawu na kolejnym stanowisku obróbczym.
Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
|
|
|
:
|
APP N° 44
|
Rozróżnianie kolorów anodowanego aluminium Zadaniem czujnika jest rozróżnienie 4 kolorów anodowanego aluminium: niebieskiego, złotego, czerwonego i zielonego.
Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
|
|
|
:
|
APP N° 43
|
Kontrola koloru cynkowanych przewodów stalowych Kontrola koloru jest przeprowadzana w celu utrzymania stałej jakości cynkowanych przewodów stalowych.
Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
|
|
|
:
|
APP N° 42
|
Detekcja koloru klamry pasów bezpieczeństwa Detekcja jest utrudniona z powodu występowania bardzo zbliżonych odcieni kolorów (beży i szarości).
Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
|
|
|
:
|
APP N° 41
|
Rozróżnianie kolorów elementów sterowania we wnętrzu auta Podczas montażu elementów kontrolnych w kokpicie auta, konieczna jest kontrola koloru. Elementy lakierowane są często tym samym, połyskującym lakierem co karoseria auta.
Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
|
|
|
:
|
APP N° 40
|
Rozróżnianie kolorów plastikowych komponentów w branży motoryzacyjnej W branży motoryzacyjnej używanych jest wiele różnych elementów z tworzywa. Elementy drzwi, siedzeń i kokpitu są często produkowane w bardzo zbliżonych odcieniach.
Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
|
|
|
:
|
APP N° 39
|
Kontrola obecności fluorescencyjnej etykiety poduszki powietrznej Zadaniem czujnika jest detekcja etykiet informujących o poduszce powietrznej. Zazwyczaj etykiety te są fluorescencyjne w odcieniach koloru zielonego. Tło etykiety jest fluorescencyjne w odcieniach niebieskiego.
Color control of the presence of an airbag label
On different positions in a car there are placed airbag warning notices. These labels are fluorescent in the green color range. The background, where the labels are placed, however, is slightly fluorescent in the blue color range.
|
|
|
:
|
APP N° 38
|
Odróżnianie połysku kolorów skóry naturalnej i syntetycznej w przemyśle motoryzacyjnym W przemyśle motoryzacyjnym zarówno skóry naturalne jak i syntetyczne wykorzystywane są do produkcji elementów wnętrza auta. Aby zapobiec montażowi niewłaściwych komponentów, przeprowadzana jest kontrola jakości przy użyciu czujnika koloru.
Color gloss differentiation of leather and leather imitations in the automotive industry
In the automotive interior field components made of leather as well as of leather imitations are available. To avoid, that the wrong parts will be mounted a quality check with a color gloss sensor must be done.
|
|
|
:
|
APP N° 37
|
Rozróżnianie kolorów uchwytów drzwi samochodowych Zadaniem czujnika jest kontrola właściwego koloru klamek drzwi samochodowych.
Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
|
|
|
:
|
APP N° 36
|
Rozróżnianie kolorów skóry i tkanin użytych we wnętrzu auta Zadaniem czujnika jest kontrola rozmaitych skór i tkanin użytych w elementach tapicerowanych wnętrza auta.
Color differentiation of leather imitations and textiles in the automotive interior field
Different leather imitations and textiles which are used especially for car doors, car seats and headliners must be controlled to avoid failures during the assembling.
|
|
|
:
|
APP N° 35
|
Rozróżnianie odcieni kolorów dywaników samochodowych Zadaniem czujnika jest kontrola koloru dywaników samochodowych różniących się odcieniem koloru.
Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
|
|
|
:
|
APP N° 34
|
Rozróżnianie koloru skóry naturalnej i syntetycznej Skóra naturalna i syntetyczna są używane do produkcji elementów wyposażenia wnętrza auta.
Color differentiation of leather and leather imitation (interior equipment)
Leather and leather imitations are used for the interior equipment in the automotive industry.
|
|
|
:
|
APP N° 33
|
Kontrola ilości warstw tkaniny poduszki powietrznej Zadanie polega na wykryciu ilości warstw tkaniny poduszki powietrznej na referencyjnym tle.
Determination of the number of airbag webs
The number of airbag webs should be detected on a reference background.
|
|
|
:
|
APP N° 32
|
Odróżnianie powierzchni tkaniny powlekanej od powierzchni niepowlekanej poduszki powietrznej Zadaniem czujnika jest detekcja właściwej strony materiału (strona z pokryciem) w procesie produkcji poduszek powietrznych. Dodatkowym utrudnieniem jest niewielka różnica w kolorze i połysku pomiędzy stronami materiału.
Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
|
|
|
:
|
APP N° 31
|
Odróżnianie brązowych i czarnych elementów z tworzywa z różnej odległości Czujnik rozróżnia kolorowe elementy z tworzywa stosowane we wnętrzu auta.
Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
|
|
|
:
|
APP N° 30
|
Kontrola koloru części lakierowanych dla branży motoryzacyjnej W branży motoryzacyjnej konieczna jest kontrola rozmaitych części lakierowanych. Elementy takie jak zderzaki, obudowy lusterek, czujniki ultradźwiękowe, pokrywki wlewu paliwa, klamki drzwiowe, drzwi oraz klapa bagażnika są często malowane połyskującym lakierem w bardzo podobnych kolorach.
Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
|
|
|
:
|
APP N° 29
|
Pomiar długości metalowych rurek w procesie produkcji Zadaniem czujnika jest kontrola długości rurek metalowych z dokładnością 0,1 mm.
Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.
|
|
|
:
|
APP N° 28
|
Kontrola fluorescencyjnego kleju na torebkach papierowych Podczas produkcji torebek papierowych klej fluorescencyjny nanoszony jest na spodnią warstwę. Zadaniem czujnika jest wykrywanie obecności kleju, aby wyeliminować produkcję wadliwych egzemplarzy.
Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.
|
|
|
:
|
APP N° 27
|
Detekcja kolorowych znaczników Zadaniem czujnika jest detekcja kolorowego znacznika podczas zadruku folii dla przemysłu spożywczego.
Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.
|
|
|
:
|
APP N° 26
|
Groove and gap detection on wire-wound armature
The gaps as well as the milled grooves on wire-wound armatures should be detected during the electronic balancing process. The maximum speed is around 2500 revolutions per minute.
|
|
|
:
|
APP N° 25
|
Detekcja kolorowych znaczników na pieluchach jednorazowych Zadaniem czujnika jest detekcja różnokolorowych znaczników z maksymalną prędkością 10m/s.
Detection of color marks on disposal diapers
Different color marks (different in color) should be detected with an inline sensor. The maximum production speed is 10 m/s.
|
|
|
:
|
APP N° 24
|
Kontrola intensywności i koloru fluorescencyjnych znaczników Zadaniem czujnika jest kontrola fluorescencyjnego koloru. W tej aplikacji występować mogą różne nasycenia, które powinny być właściwie wykrywane.
Color and intensity control of fluorescent color marks during the production
The intensity of a printed fluorescent color should be controlled. At this, fluorescent color marks with different densities of color are present. Thus, the color as well as the intensity of the fluorescent color mark can be controlled.
|
|
|
:
|
APP N° 23
|
Kontrola kolorowych płynów Podczas cyklu przetwarzania płynów konieczna jest kontrola jakości.
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
|
|
|
:
|
APP N° 22
|
Rozróżnianie koloru szklanych butelek Aby we właściwy sposób sortować szkło w przemyśle recyklingu konieczna jest detekcja koloru butelek.
Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.
|
|
APP N° 21
|
Nagrywanie i monitorowanie poziomu koloru Coraz więcej użytkowników czujnika Spectro-3 używa oprogramowania do kontroli koloru. Nieskończona liczba producentów materiałów foliowanych (przemysł meblowy, papierniczy i motoryzacyjny) oraz wytwórcy laminowanych płyt MDF potrzebuje czujnika nie tylko do detekcji koloru, ale także do katalogowania danych produkcyjnych.
Color signal recording and color signal monitoring
More and more users of the SPECTRO-3 color sensors are asking for a color monitoring and color recording software. The manufacturers of endless materials like plastic foils (e.g. furniture, paper and automotive industry) and the fabricators of laminated medium density fiberboards (MDF) needs an inline sensor system not only for a 100% - quality control but beyond that a system for color signal recording, which allows also to document data like product number, customer name or number, order number, operator name, time and date. Furthermore, the sensor system should inform the operator about the color trend of the product, thus possible countermeasures can be duly initiated.
|
|
|
:
|
APP N° 20
|
Kolora koloru nakrętek Zadaniem czujnika jest detekcja koloru plastikowych nakrętek.
Closure head color control
Different plastic closure heads should be color controlled.
|
|
|
:
|
APP N° 19
|
Detekcja czarnego znacznika na metalowej rurce Drukarka atramentowa nanosi znaczniki na rurki stalowe. Zdarza się, że znacznik jest w złym miejscu lub jego powierzchnia nie jest do końca zadrukowana.
Black ink mark control on metal tubes
On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient.
|
|
|
:
|
APP N° 18
|
Kontrola pozycji pasów przenośnika w przemyśle drzewnym i papierniczym Specjalne pasy przenośników są używane w przemyśle papierniczym oraz w przemyśle drzewnym (np. podczas produkcji MDF). Pozycja pozioma musi być korygowana w zakresie ±0.2mm, a pozycja pionowa ±2mm. Materiał przenośnika to stal nierdzewna lub tworzywo sztuczne.
Lateral position control of conveyor belts in the wood and paper industry
In the wood industry (during the production e.g. of MDFs = medium density fiberboards) as well as in the paper industry, special conveyor belts are in use. The lateral position of the band material must be hold in a range of ±0.2mm, whereas the vertical position can change in the range of ±2mm. The material of the conveyor belt is either stainless steel or plastic fabric.
|
|
|
:
|
APP N° 17
|
Rozróżnianie szkła mlecznego i bezbarwnego butelek W przemyśle obróbki szkła dla przemysłu farmaceutycznego wymagane jest matowienie butelek. Zadaniem czujnika jest rozróżnianie butelek matowych od przezroczystych.
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
|
|
|
:
|
APP N° 16
|
Detekcja połyskujących miejsc na powierzchni matowego szkła Podczas produkcji matowych płyt szklanych konieczna jest detekcja niewielkich miejsc z połyskiem. Średnica stref z połyskiem zaczyna się już od ok. 3mm.
Detection of glossy regions on a matt-finished glass plate
During the production of matt-finished glass plates the matt-finished surface must be controlled particularly with regard to small glossy spot. The glossy domains which should be detected are starting with a diameter of approximately 3 mm.
|
|
|
:
|
APP N° 15
|
Detekcja pasów z połyskiem perłowym na papierze zabezpieczającym Zadaniem czujnika jest kontrola pozycji oraz koloru pasków z połyskiem perłowym.
Detection of pearlescent color strips on security papers
The position as well as the quality of pearlescent multi color strips on security paper should be controlled.
|
|
|
:
|
APP N° 14
|
Kontrola wysokości etykiety z bezbarwną warstwą ochronną Wysokość etykiety z bezbarwną warstwą ochronną powinna być kontrolowana z dokładnością 0,1mm.
Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.
|
|
|
:
|
APP N° 13
|
Kontrola powierzchni tłoka: powierzchnia stalowa lub chromowana Czujnik powinien odróżniać powierzchnię stalową od chromowanej tłoka.
Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
|
|
|
:
|
APP N° 12
|
Rozróżnianie koloru szwów o zbliżonym odcieniu Zadaniem czujnika jest rozróżnianie pomiędzy beżowym i szarym szwem.
Detection of two different colored threads on interior parts
The task is to distinguish properly between the two different colored threads (beige and gray).
|
|
|
:
|
APP N° 11
|
Detekcja krawędzi białego materiału na białej powierzchni pieluchy Zadaniem czujnika jest detekcja obecności i pozycji białego materiału podczas produkcji pieluch.
Inline edge detection of a white label on a white diaper
During the assembly of diapers, the presence as well as the position of the label must be controlled.
|
|
|
:
|
APP N° 10
|
Kontrola koloru szwów na dwóch różnych imitacjach skóry Są 2 różne kolory imitacji skóry, beżowy i szary oraz odpowiadające im kolory szwów. Zadaniem czujnika jest wykrycie szwu.
Color control of two different seams on two different leather imitations
The task is to detect, whether the seam is present on the leather imitation or not. There are two different colored leather imitations, beige and gray and respectively a beige thread as well as a gray thread.
|
|
|
:
|
APP N° 9
|
Detekcja spawu rurki stalowej Spaw musi zostać wykryty podczas obrotu rurki. Dodatkowym utrudnieniem są rysy i rdza na powierzchni rurki.
Detection of a welding line on a metal rod
The welding line must be detected during the rotation of a metal rod. It has to be taken into account, that there are scratches as well as rust on the metal surface.
|
|
|
:
|
APP N° 8
|
Kontrola koloru osłon czujników cofania podczas montażu Podczas montażu ultradźwiękowych czujników w zderzaku konieczna jest kontrola koloru osłon czujników.
Color control of ultrasonic sensor caps in the automotive industry during the integration process
During the assembling of the ultrasonic sensors into the bumpers the color of the ultrasonic sensor caps must be controlled.
|
|
|
:
|
APP N° 7
|
Rozróżnianie arkuszy blachy z pokryciem i bez pokrycia Podczas produkcji arkuszy blachy z pokryciem konieczna jest detekcja właściwej strony arkusza (wierzchniej i spodniej).
Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
|
|
|
:
|
APP N° 6
|
Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.
|
|
|
:
|
APP N° 5
|
Kontrola okleiny podczas produkcja drzwi 1. Detekcja przypaleń I przetarć na powierzchni okleiny podczas produkcja drzwi:
Okleina jest klejona do płyty MDF podczas ruchu płyty, jednak może się zdarzyć, że gorący pistolet uszkodzi powierzchnię okleiny. Wszelkie przetarcia i przypalenia powinny być wykryte przez czujnik.
2. Rozróżnianie pomiędzy błyszczącą i matową biała okleiną:
Zadaniem czujnika jest rozróżnianie pomiędzy błyszczącą i matową biała okleiną.
Veneer control during the door production
1. Detection of slightly burned veneer zones and veneer tear-off during the door production:
The veneer will be glued onto the mdf plate during the movement, however, if the process will be interrupted due to any reason, it can happen, that the hot air gun, which will be used normally to warm up the glue, scorches or burns the veneer surface slightly. Furthermore the color sensor should detect a veneer tear-off.
2. Differentiation between white glossy veneer and white matt veneer:
The task is to distinguish between white glossy and white matt veneer.
|
|
|
:
|
APP N° 4
|
Detekcja obecności włókniny podczas produkcji pieluch jednorazowych Podczas produkcji pieluch jednorazowych konieczna jest detekcja warstwy materiału. Prędkość produkcji wynosi do 10m/s, a wysokość materiału może się lekko zmieniać. Kolor pieluchy jest biały, jednak wykrywana warstwa materiału jest dodatkowo fluorescencyjna i widoczna przy świetle UV.
Detection of the presence of the fleece during the production of disposable diapers
During the production of disposable diapers the assembling of the fleece must be checked. The production speed is approximately up to 10m/s and the height of the diapers can slightly changing. Furthermore the color of the diaper as well as the color of the fleece is white but additionally to this the fleece is fluorescent in blue under the influence of UV light.
|
|
|
:
|
APP N° 3
|
Detekcja kierunku laminowanego paska (detekcja stron paska) Detekcja laminowanego paska. Możliwe kolory: biały, czarny i czerwony.
Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
|
|
|
:
|
APP N° 2
|
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
|
|
|
:
|
APP N° 1
|
Kontrola jakości produkcji poduszek powietrznych w przemyśle motoryzacyjnym 1. Kontrola powierzchni z pokryciem i bez pokrycia:
Jedna strona materiału posiada specjalne pokrycie. Zadaniem jest odróżnianie stron materiału.
2. Detekcja obecności przekładki foliowej w materiale poduszki powietrznej.:
Detekcja obecności przekładki foliowej powinna być przeprowadzona w miejscu wycięcia materiału.
Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.
|
|