Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Aplikacje dla użytkowników!
D-S-Q4-(28x0.2)-...


1) Wybierz język:


Synthetic Industry (Kunststoffindustrie) 
N° 341


Plastik filmin bükülme kontrolü
Mat plastik üzerindeki bükülmeler saptanabilir.

Plastic film plunging control
Folds in a matt plastic film should be detected.
Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik) 
N° 281


Perçin parçalarının çıkarılmasının kontrolü
Perçin parçalarının korunması gerektiğinden dolayı çok küçük perçin parçaları kontrol edilmeli ve sayılmalıdır. Parçaların çıkarılma hızı birkaç m/s değerindedir.

Ejection control of stamping parts
Due to stamping tool protection reasons the ejection of very small stamping parts should be controlled and the parts counted. The ejection speed of the parts is in the range of a few m/s.
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung) 
N° 240


Tekerleğin konsantrik sapmasının kontrolü
Yüksek hızlı tekerleğin konsantrik sapması kontrol edilebilir.

Concentric runout control of a wheel
The concentricity of a high speed wheel should be controlled.
Paper Industry / Printing Industry (Papierindustrie / Druckindustrie) 
N° 239


Geçirgen bir film üzerindeki renkli noktanın saptanması
Geçirgen bir film üzerindeki renkli nokta saptanabilir. Kullanılan sensör εx- skalasındadır ve bu nedenle bir optik fiber ünitesi gereklidir.

Detection of a color mark on a transparent plastic film
A color mark on a transparent plastic film should be detected. The sensor is used in the Ɛx – range, thus, an optical fiber unit is necessary.
Synthetic Industry (Kunststoffindustrie) 
Packaging Industry (Verpackungsindustrie) 
N° 180


Plastik bir film üzerinde deliğin saptanması
Plastik bir film üzerinde delik saptanabilir. Burada, plastik filmin hızı birkaç m/s ve plastik üzerindeki deliklerin çapları yaklaşık 0.3 mm olmadır.

Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
Automotive Industry (Automobilindustrie) 
N° 110


εx- aralığında spray jet kontrolü
εx- aralığında spray jet kontrolü için en uygun sistem εx- bölgesinde elektronik bileşen içermeyen fakat optik fiber içeren bir ünitedir.

Spray jet control in the Ɛx range
For the spray jet control in the Ɛx range (zone 0) the most suitable system is a unit which comes without electronically components in the Ɛx zone, but with fiber optics.


NEWS

Udział w targach:

 •   IFAT Munich 2024
 •   SPS Italia 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ Innovation Day Recycling
 •   SKZ Network Day
 •   SKZ Technology Day
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024
 •   European Coatings Show 2025

więcej...


Artykuł specjalistyczny:


 
Testing Recyclates Directly during Injection Molding and Extrusion
NIR Process for the Inline Inspection of Recycled Plastics ()
PlasticsInsights 3/2024



więcej...


Informacje prasowe:

Kalibracja koloru inline z użyciem recyklatu tworzywa sztucznego
(Systemy pomiaru koloru inline)

 
Test report on Inline color measurement of recyclates ()
(System pomiaru koloru inline)

więcej...


Whitepapers:

Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
Checking the plastic type of recyclates and virgin material using NIR technology ()


 
Nowe aplikacje:

Wykrywanie wgnieceń i okrągłych wgłębień w wytłaczanych taśmach metalowych
(N° 801)
Rozróżnianie komponentów wykonanych ze skóry, materiałów tekstylnych i tworzyw sztucznych do wnętrza pojazdu
(N° 802)

 
Pomiar koloru pokrywek z tworzywa sztucznego
(N° 803)

więcej...


Co to jest ...
... napięcie powierzchniowe?
... parowanie oleju?
... pomiar grubości warstwy
    oleju?

więcej...


Nowości w oprogramowaniu:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

więcej...



FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP