Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Esempi di applicazioni pratiche nell'uso industriale


1) Selezionare un campo di applicazioni:
    Chemical Industry (Chemische Industrie)


2) Selezionare una lingua:


Scheda
Dati:


APP N° 794

Chemical Industry (Chemische Industrie) 
Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
Scheda
Dati:


APP N° 711

Chemical Industry (Chemische Industrie) 
Param.:
Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
Scheda
Dati:


APP N° 673

Chemical Industry (Chemische Industrie) 
Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.


APP N° 626

Chemical Industry (Chemische Industrie) 
Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
Scheda
Dati:


APP N° 598

Chemical Industry (Chemische Industrie) 
Param.:
INI:
Color control of flames
The color of a flame should be controlled.
Scheda
Dati:


APP N° 517

Chemical Industry (Chemische Industrie) 
Param.:
INI:
Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
Scheda
Dati:


APP N° 459

Chemical Industry (Chemische Industrie) 
Param.:
INI:
Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
Scheda
Dati:


APP N° 458

Chemical Industry (Chemische Industrie) 
Param.:
INI:
Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
Scheda
Dati:


APP N° 457

Chemical Industry (Chemische Industrie) 
Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
Scheda
Dati:


APP N° 213

Chemical Industry (Chemische Industrie) 
Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
Scheda
Dati:


APP N° 195

Chemical Industry (Chemische Industrie) 
Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
Scheda
Dati:


APP N° 126

Chemical Industry (Chemische Industrie) 
Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.
Scheda
Dati:


APP N° 111

Chemical Industry (Chemische Industrie) 
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
Scheda
Dati:


APP N° 55

Chemical Industry (Chemische Industrie) 
Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
Scheda
Dati:


APP N° 23

Chemical Industry (Chemische Industrie) 
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.


NOTIZIE

Partecipazione a fiere:

 •   Sensors Converge 2024
 •   SKZ Innovation Day 2024
 •   SKZ Network Day 2024
 •   SKZ Technology Day 2024
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024
 •   European Coatings Show 2025

più...


Comunicati stampa:

Determinazione dello spessore degli strati tra e su film plastici
(Misura a luce trasmessa MIR)

 
Controllo del getto nebulizzato in modalità a luce riflessa
(Misura di quantità erogate molto basse in aree pericolose)

più...


Video:


 
Sistemi di sensori per l'industria del riciclaggio della plastica
Misurazione del colore dei riciclati

 


più...


Articolo specialistico:


 
Testing Recyclates Directly during Injection Molding and Extrusion
NIR Process for the Inline Inspection of Recycled Plastics ()
Plastics Insights 3/2024

 




Libri bianchi:

Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
Checking the plastic type of recyclates and virgin material using NIR technology ()

più...


Nuove applicazioni:

Rilevamento di ammaccature e avvallamenti su strisce di trancia in metallo
(N° 801)
Distinzione di componenti in pelle, tessuto e plastica per interni
(N° 802)
Misurazione del colore di coperchi di plastica
(N° 803)

più...


GLOSSARIO: Cos'è ...
... la tensione superficiale?
... l’evaporazione dell’olio?
... la misurazione dello spessore
    dello strato di olio?

più...



Novità sui software:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

più...




FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP