 |
Scheda Dati:
 |
APP N° 782
Param.:
 |
|
Seam detection on fabrics
The seam on technical fabrics should be detected.
|
|
 |
Scheda Dati:
 |
APP N° 776
|
Seam detection on towels
The seam on towels should be detected.
|
|
 |
Scheda Dati:
 |
APP N° 772
|
Thickness control of abrasive carpets
The thickness of abrasive carpets should be measured.
|
|
 |
Scheda Dati:
 |
APP N° 750
Param.:
 |
|
Color measurement of dyed yellow cotton strands
The color of cotton strands should be measured during the tinting process.
|
|
 |
Scheda Dati:
 |
APP N° 749
Param.:
 |
INI:
 |
|
Color separation of recycled textiles
During the recycling process textiles should be color separated.
|
|
 |
Scheda Dati:
 |
APP N° 745
Param.:
 |
|
Color measurement of polyester thread
The color of polyester thread should be measured.
|
|
 |
Scheda Dati:
 |
APP N° 744
Param.:
 |
|
Color measurement of polyester mesh
The color of polyester mesh should be measured.
|
|
 |
Scheda Dati:
 |
APP N° 730
|
Fiber density control of fiber sheets
The density of fiber sheets should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 718
|
Glue detection on carpet backing
The presence of glue should be controlled on carpet backing.
|
|
 |
Scheda Dati:
 |
APP N° 705
|
Differentiation of white paper and white synthetic cotton
White paper should be differentiated from white synthetic cotton.
|
|
 |
Scheda Dati:
 |
APP N° 694
Param.:
 |
INI:
 |
|
Fluorescence color control of yarn bobbins
The fluorescence color of yarn bobbins should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 671
Param.:
 |
|
Backside-, frontside detection of carpets
The backside from a carpet should be differentiated from the frontside.
|
|
 |
Scheda Dati:
 |
APP N° 622
|
Fluorescent thread detection on carpets
A fluorescent seam should be detected on carpet.
|
|
 |
Scheda Dati:
 |
APP N° 619
|
Color measurement of fabrics
Green and olive fabrics should be color controlled.
|
|
 |
Scheda Dati:
 |
APP N° 605
Param.:
 |
|
Color measurement of red-black patterned fabrics
The color of red-black patterned fabrics should be measured.
|
|
 |
Scheda Dati:
 |
APP N° 604
Param.:
 |
|
Color measurement of gray-blue fabrics
The color of gray-blue fabrics should be measured.
|
|
 |
Scheda Dati:
 |
APP N° 603
Param.:
 |
|
Color measurement of orange fabrics
The color of orange – black patterned textiles should be measured.
|
|
APP N° 582
Param.:
 |
|
Moisture control of fabrics
The moisture of textiles should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 556
Param.:
 |
|
Color differentiation of threads
Different colored threads, used for sewing leather together, should be controlled on sewing machines.
|
|
 |
Scheda Dati:
 |
APP N° 516
Param.:
 |
INI:
 |
|
Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
|
|
 |
Scheda Dati:
 |
APP N° 495
|
Gloss measurement on coated textiles
The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value.
|
|
 |
Scheda Dati:
 |
APP N° 494
Param.:
 |
INI:
 |
|
Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 486
Param.:
 |
INI:
 |
|
Color mark measurement on fabric
The L*a*b* values of color marks on different fabric should be determined.
|
|
 |
Scheda Dati:
 |
APP N° 485
Param.:
 |
INI:
 |
|
Winding control of yarn on a pirn
During the winding of yarn, the correct winding should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 461
Param.:
 |
INI:
 |
|
Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
|
|
 |
Scheda Dati:
 |
APP N° 460
Param.:
 |
|
Edge position detection on fabric
The position of the changeover from rough to fine on a textile should be detected.
|
|
 |
Scheda Dati:
 |
APP N° 429
Param.:
 |
INI:
 |
|
Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
|
|
 |
Scheda Dati:
 |
APP N° 426
|
Detection of color on fabric
The color of different colored fabric should be inline controlled.
|
|
 |
Scheda Dati:
 |
APP N° 416
|
Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 391
|
Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
|
|
 |
Scheda Dati:
 |
APP N° 296
|
Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
|
|
 |
Scheda Dati:
 |
APP N° 247
|
Presence control of carbon fibers on a sewing needle
The presence of a carbon fiber bundle on a sewing needle should be controlled. It has to be taken into account, that there is only space for the sensor in the direction of the sewing needle.
|
|
 |
Scheda Dati:
 |
APP N° 243
|
Position control of a fluorescent thread in a fabric
The position of a fluorescent thread in a fabric should be controlled. UV light (365nm to 385nm) is necessary for excitation of the fluorescent material. The fluorescent material emits light in the visible range (green).
|
|
 |
Scheda Dati:
 |
APP N° 234
|
Edge detection of a fabric
The lateral position of a wide-meshed fabric should be controlled in a range of 20mm. At this, the necessary accuracy should be ±2mm and the bandwidth of the analogue output signal has to be a few Hz.
|
|
 |
Scheda Dati:
 |
APP N° 220
|
Lattice texture presence control on a fleece stripe
The presence of a lattice texture on a fleece stripe should be controlled.
|
|
 |
Scheda Dati:
 |
APP N° 190
|
Detection of a gap in a fabric
In a fabric a gap should be detected. At this different colored fabric (from dark to bright) are possible.
|
|
 |
Scheda Dati:
 |
APP N° 171
|
Color differentiation of fabrics in the interior field of the automotive industry
Different fabrics should be distinguished by color control.
|
|
 |
Scheda Dati:
 |
APP N° 131
|
Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
|
|
 |
Scheda Dati:
 |
APP N° 119
|
Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
|
|
 |
Scheda Dati:
 |
APP N° 118
|
Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
|
|
 |
Scheda Dati:
 |
APP N° 117
|
Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
|
|
 |
Scheda Dati:
 |
APP N° 108
|
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
|
|
 |
Scheda Dati:
 |
APP N° 85
|
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
|
|
 |
Scheda Dati:
 |
APP N° 83
|
Differentiation of threads on an airbag textile
Different colored threads must be differentiated. At this, the treads can be also bicolored.
|
|
 |
Scheda Dati:
 |
APP N° 57
|
Detection of a fluorescent line on different colored foamed materials
A fluorescent line must be detected on different colored foamed materials.
|
|
 |
Scheda Dati:
 |
APP N° 35
|
Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
|
|
 |
Scheda Dati:
 |
APP N° 33
|
Determination of the number of airbag webs
The number of airbag webs should be detected on a reference background.
|
|
 |
Scheda Dati:
 |
APP N° 32
|
Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
|
|
 |
Scheda Dati:
 |
APP N° 3
|
Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
|
|
 |
Scheda Dati:
 |
APP N° 2
|
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
|
|
 |
Scheda Dati:
 |
APP N° 1
|
Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.
|
|