Практические примеры применения в промышленной сфере
RLS-GD-15/60°
1) Выбрать язык:
|
Front side – backside differentiation of paper web The backside of yellow and white paper web should be differentiated from the respective front side. |
|
|||
|
Gloss measurement of transparent plastic films The gloss factor of different transparent plastic films should be measured on both sides. |
|
|||
|
测量阳极氧化铝板材的光泽度 应在生产线上测量不同的铝板材的光泽度。 Gloss measurement of anodized guide rails The gloss of anodized aluminum guide rails should be inline measured. |
|
|||
|
半透明塑料膜的光泽度测量 应联机测量半透明的塑料膜的光泽度。 Gloss measurement of translucent plastic films The gloss level of semi-transparent plastic films should be inline measured. |
|
|||
|
涂层纺织品的光泽检测 应检测涂层纺织品表面的光泽度系数。 Gloss measurement on coated textiles The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value. |
|
|||
|
抛光石板的光泽检测 应检测抛光石板的光泽。 Gloss measurement on polished slabs The gloss of polished slabs should be measured. |
|
|||
|
汽轮机叶轮的表面光滑度检测 用于检测汽轮机叶轮的表面光滑度。传感器被装在一个机械手臂上，检测时，手臂会垂直将传感器移动距离被测物15mm的位置，同时叶轮也会被水平移动，以沿着叶片轴心方向依次检测光滑度。通常合格的叶轮表面光滑度不应该超过5。 Gloss measurement of the primer surface on a vane The gloss factor of the primer surface of vanes from wind turbines should be measured contactless. At this, the gloss sensor is mounted on a robot and will be moved vertically to make sure, that the distance to the primer surface of the vane remains approximately at 15mm, simultaneously the vane will be moved horizontally so that the gloss factor can be measured along the long axis of the vane. Normally the gloss factor of the primer surface should be lower than 5 in order to guarantee that the following coating get a fix compounding to the primer surface. |
|
|||
|
光伏电池板玻璃表面的光洁度检测 传感器用于检测光伏电池板玻璃表面的光洁度。 Gloss measurement of the glass surface of a photo voltaic panel The gloss factor of the glass cover of a photo voltaic panel should be measured during the production. |
|
|||
|
隔音地毯的正反面分辨 该应用中，传感器用于分辨隔音地毯的正反面。 Differentiation of front side and back side from a sound damping carpet The front side should be distinguished from the back side of a sound damping carpet. |
|
|||
|
分辨人造革 该应用中使用光滑度传感器区分两块黑色人造革并记录相关数据。 Differentiation of leather imitations Two black leather imitations should be differentiated and the gloss factor should be documented with a gloss measurement device. |
|
|||
|
门板喷漆后的在线光滑度/光泽度检测 门板在喷漆之后需要立即对其光滑度/光泽度进行在线检测。检测结果会反应出喷漆量是否到位。如果喷漆量不够，门板表面光滑度值会比较低，门板表面略显粗糙。 Gloss inline measurement after the varnish of doors Immediately after the varnish of the doors the gloss factor should be controlled. Tests have shown that the amount of varnish, which will be sprayed onto the door surface, influences the gloss factor. If not enough varnish is used the surface becomes rough. |
|
|||
|
砂纸表面光滑度/光泽度在线检测 表面光滑度/光泽度是衡量砂纸质量的一个重要因素，因为其光滑度必须在生产的过程中在线进行检测。 Inline gloss measurement on abrasive belts The gloss factor is a significant parameter for the surface quality, the roughness, of an abrasive belt. Thus a gloss measurement inline sensor should be used for quality control of the abrasive surface. |
|
|||
|
塑料膜及复合板的在线光滑度/光泽度检测 家具行业的塑料膜及复合板在生产的过程中光滑度/光泽度需要在线检测。 Inline gloss measurement of plastic films and laminated plates During the production of plastic films as well as of laminated plates the gloss factor should be measured. |
|
|||
|
家具行业光滑度/光泽度在线检测 在制作门板的过程中，喷漆之后即需要对门板的光泽度进行在线检测以保证产品的质量。 Inline gloss control in the furniture industry During the manufacturing process of doors just after the painting line the amount of color must be controlled. |
|
|||
|
检测雾面玻璃板上的光滑区域 不合格的雾面玻璃上会有小块的光滑玻璃面斑，SI传感器可将此光滑面斑检测出来，这种面斑的直径通常在3mm以上。 Detection of glossy regions on a matt-finished glass plate During the production of matt-finished glass plates the matt-finished surface must be controlled particularly with regard to small glossy spot. The glossy domains which should be detected are starting with a diameter of approximately 3 mm. |
|
