Praktische Beispiele aus dem industriellen Einsatz
A-LAS-F12-...
1) Sprache auswählen:
|
Glue line gap detection on transparent label On a transparent label a gap in a glue line should be detected. |
|
|||
|
检测一个钢制销钉的长度 应在一个钢制销钉运动期间测量其长度。此时，金属棒以约每秒钟 2 米的速度运动。 Length control of a metal rod The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement. |
|
|||
|
识别铝型材上的缺陷 应识别铝型材上拱起的部位。 Detection of super elevations of aluminum profile Super elevations of aluminum profile should be detected. |
|
|||
|
监测玻璃灯管中灯丝支架的位置 应监测红色或透明玻璃管中的各个灯丝支架的位置。 Position control of filament holders in bulbs The position of the filament holders in clear as well as red glass bulbs should be controlled. |
|
|||
|
测量高速角度并额外检查旋转方向 应测算出快速旋转的编码盘的角度位置，此外，还须确定其旋转方向。 High speed angle measurement with direction control The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled |
|
|||
|
检查SMD LED的填料 应监测SMD LED的透明填料的物位。在此应注意，不可超过给定的填料高度 (充填过度)。 Overfilling control of SMD LEDs The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling. |
|
|||
|
透明塑料薄膜上透明塑料标签的位置检测 传感器用于检测透明塑料薄膜上透明塑料标签的位置。薄膜运动速度为几米/秒。 Detection of the position of optical transparent plastic label on optical transparent plastic film The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s. |
|
|||
|
透明塑料片上滚花的检测 在此应用中，SI用于检测透明塑料片上的滚花是否存在，在次品中，滚花会部分缺失。 Control of the presence of straight knurling on a transparent plastic closure On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present. |
|
|||
|
用激光光幕检测滴剂 用SI激光光幕可对滴剂的下滴数量及下滴体积进行检测。 Drop control with a laser through beam system The number as well as the volume of drops should be controlled. |
|
|||
|
金属环上的焊缝检测 在此应用中，SI传感器用于检测一个圆形金属环上的焊缝处，在检测过程中，金属环是旋转的。 Detection of a welding line on a metal ring The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around. |
|
|||
|
单丝表面的打节及缺陷检测 在单丝或者丝线的表面，有时会出现打节及缺陷的情况，这种情况必须被检测出来。如图所示的应用中，不同外径的单丝/丝线都可以被检测。 Knot and defect control of mono filaments Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s. |
|
|||
|
电子产品针脚高度检测 如图所示，该电子产品的针脚高度在需要在线检测。 Pin height control of electrical components The height of the pins of an electrical component should be controlled during the production. |
|
|||
|
木制品直径在线检测 在木制棒材产品生产过程中，当棒材运动的时候，产品的外径需要检测。 Inline diameter control of wooden staff During the production of wooden staff the diameter must be controlled while the rod is moved. |
|
|||
|
控制电动牙刷轴的偏心率 在该应用中，传感器被用于控制电动牙刷轴偏心的频率和振幅。 Control of the eccentricity of the shaft of an electrical tooth brush The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled. |
|
TOP