SPECTRO-1-POF Series
Single-channel sensor systems for use with plastic light guides
General technical data ....
| Type | Light source | Measurement range | Detection range | LxWxH (mm) | For use with | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|---|---|
| SPECTRO-1-POF | White-light LED, super bright | 1...500mm (dep. on fiber optics) | Ø1...20mm | 65x65x33.3 | POF-SPX-d2.2-(1.0)-... (plastic fiber optics), KL-M18/20-SPX (optical frontend) |
|
|
|
||
| SPECTRO-1-POF-IR | IR LED, 860nm | 1...500mm (dep. on fiber optics) | Ø1...20mm | 65x65x36 | POF-SPX-d2.2-(1.0)-... (plastic fiber optics), KL-M18/20-SPX (optical frontend), ELS-IRL (external light source) |
|
|
|
GENERAL TECHNICAL DATA:
| Software | Windows® PC software: SPECTRO1-Scope |
| Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
| Current consumption | <160mA |
| Max. switching current | 100mA, short circuit proof |
| Switching state indication | 2 yellow LEDs (OUT0 and OUT1) |
| Inputs digital (2x) | IN0 and IN1 (0V/+24V) |
| Outputs digital (2x) | OUT0 and OUT1 (0V/+24V) |
| Output analog (1x) | Voltage 0...+10V or current 4...20mA (adjustable via PC software) |
| Interface | RS232 (USB and Ethernet converter available) |
| Pulse lengthening | 0...100ms, abjustable via PC software |
| Averaging | max. 32768 values, adjustable via PC software |
| Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 50kHz (depends on parameterization) - DC and OFF operation: max. 175kHz (depends on parameterization) |
| Switching frequency | max. 60kHz |
| Analog band width | max. 90kHz (-3dB) |
| Transmitter (light source) | depends on sensor type |
| Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE -DC), OFF operation (LED MODE-OFF) |
| Measuring range | depends on sensor type |
| Receiver | Photo diode |
| Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
| Ambient light | max. 5000 Lux |
| Detection range | depends on sensor type |
| Reproducibility | 2 digits at 12-bit A/D conversion |
| Housing dimensions | depends on sensor type |
| Housing material | Aluminum, anodized in black (if optics holding device: anodized) |
| Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 |
| Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
| Operating temp. range | -20°C ... +55°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | IP64 |
| EMC test acc. to | DIN EN 60947-5-2 |
TOP