Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Videos



  Let's make recycling even better - laboratory device - L*a*b*

Color measurement of plastic recyclates:
Product introduction of laboratory color measurement device SPECTRO-3-0°/45°-MSM-LAB-ANA-P



00:01:05 (Royalty free music by frametraxx.de)



  Measuring the pellet sample with SPECTRO-3-0°/45°-MSM-LAB-ANA-P

Color measurement of recyclate samples with laboratory device SPECTRO-3-0°/45°-MSM-LAB-ANA-P: After successful calibration, the recyclate recording unit must be flanged to the calibration recording unit for the color measurement of plastic recyclates. To do this, the RAL plastic card that may still be in the calibration recording unit must first be removed. After opening the pellet sample container, pour the pellets completely into the funnel and place the empty sample container in the recess provided below the recyclate receiving unit.



00:07:57 (Royalty free music by frametraxx.de)



  Calibration of laboratory device SPECTRO-3-0°/45°-MSM-LAB-ANA-P



00:05:44
(Royalty free music by frametraxx.de)



  Commissioning of laboratory device SPECTRO-3-0°/45°-MSM-LAB-ANA-P



00:02:09 (
Royalty free music by frametraxx.de)



  The cycle of color - SPECTRO3-MSM-DOCAL-Scope V1.0

Making sure things don´t get too colorful when using plastic recyclates.
A combination of technical progress in the processing and sorting of plastic waste and the impact of EU legal requirements (50 % of plastic packaging must be recycled by 2025 and 55% by 2030) means that the amount of recyclable plastic waste has been steadily increasing for years. The requirements placed on the quality of recyclates have also been increasing. In addition to the type of plastic and its former purpose, the color of the recyclate is also assuming increasing importance.



This video shows the possible applications of the SPECTRO3-MSM-DOCAL-Scope V1.0 software in combination with the SPECTRO-3-0°/45°-MSM-LAB-ANA-P laboratory color measurement system (see also → SPECTRO-LAB-SYSTEMS).
00:14:29 (Royalty free music by frametraxx.de)



 Presentation of the SPECTRO-M series: Oil detection

The recognition of thin oil layers on metals, especially in sheet forming processes is assuming ever-greater importance in the e-mobility age. If it is necessary to determine whether the drawing oil layer applied is located within the tolerance range before the punching process, it is first necessary to check after the cleaning procedure whether residual oil has been removed from the metal surface to the whole. The increasing use of synthetic special oils means that previous methods used to perform oil controls can no longer be used, as these new oils do not have any fluorescent characteristics. In the mid-wavelength infrared light range (MIR) on the other hand, even ultra-thin layers are rendered “visible” again.



This video gives a brief insight into the standardized MIR absorption method. It also deals with the evaporation process of oils and establishes a relation to the most common approach used to determine the surface tension value using test ink methods.
00:05:06 (Royalty free music by frametraxx.de)



Software SensorFinder V1.1 in connection with cab-4/USB or cab-5/USB

The software "SensorFinder" is a tool to search for intelligent sensors from Sensor Instruments, which are connected to the local PC. The identity, firmware and connection settings of the respective sensors are listed for each individual sensor in a clear, compact representation.



This video shows how to install the "SensorFinder" software, how a USB converter of type cab-4/USB or cab-5/USB establishes a connection between sensor and PC and how to find available sensors with "SensorFinder".
00:04:11 (Royalty free music by frametraxx.de)



Software SensorFinder V1.1 in connection with cab-4/ETH or cab-5/ETH

The software "SensorFinder" is a tool to search for intelligent sensors from Sensor Instruments, which are connected to the local PC. The identity, firmware and connection settings of the respective sensors are listed for each individual sensor in a clear, compact representation.



This video shows how to install the "SensorFinder" software, how an Ethernet converter of type cab-4/ETH or cab-5/ETH establishes a connection between sensor and PC and how to find available sensors with "SensorFinder".
00:03:23 (Royalty free music by frametraxx.de)



  Tutorial software L-LAS-Spray-Control-Scope V2.0



Parameterization of the software L-LAS-Spray-Control-Scope V2.0 for the implementation of spray jet control with the line sensor L-LAS-TB-28-T-AL-SC (transmitter) and L-LAS-TB-28-R-AL-SC (receiver).
00:13:33 (Royalty free music by frametraxx.de)



 
C
ounting transparent plastic covers with
         SPECTRO-1-CONLAS and A-LAS-N-F16-9.5x0.8-150/80-C-2m




Application example of the control electronics SPECTRO-1-CONLAS in connection with the sensor front end A-LAS-N-F16-9.5x0.8-150/80-C-2m:
Counting transparent plastic covers.
00:00:51 (Royalty free music by frametraxx.de)



 
  P
roduct authentication with LUMI-STAR-MOBILE-BL/OR-POL-IOS



Application example with a LUMI-STAR-MOBILE-BL/OR-POL-IOS:
Product authentication of blister foils.
00:04:44 (Royalty free music by frametraxx.de)



  Leather marking with LUMI-INLINE-SL-IR/IR



Application example of a LUMI-INLINE-SL-IR/IR for leather marking:
Inline detectors for automated checking of product markers during the production process.
00:01:33 (Royalty free music by frametraxx.de)



  Tutorial spray jet control with L-LAS-TB-75-AL



Implementation of the spray jet control with the line sensor L-LAS-TB-75-T-AL (transmitter) and L-LAS-TB-75-R-AL (receiver) using a car windscreen washer jet as an example. 



  Tutorial DIFFERENTIATOR



Application video for parameterisation of the SPECTRO-1-CONLAS control unit in combination with sensor frontend A-LAS-N-F16-9.5x0.8-150/80-C-2m. The difficulty of this measuring task is the correct counting of transparent plastic caps. The "DIFFERENTIATOR" operating mode solves this problem.



  Tutorial EXTERN TEACH with color sensor SPECTRO-3-DIL-SL



The EXTERN TEACH option allows you to teach colors without using a PC.



  Tutorial spray jet monitoring with A-LAS-CON1



Implementation of spray jet monitoring: The volume quantity of a spraying process should be determined. This application uses an A-LAS-CON1 control unit and an analog laser light barrier of type A-LAS-F24-16x1-40/60.



  Tutorial SPECTRO3-COMFORT-Scope software



Operation of the SPECTRO3-COMFORT-Scope Software



  Tutorial microdosing monitoring



Monitoring of a microdosing system: The parameters to be monitored are the pulses at which the material to be dosed is emitted and the quantity of the material. In this setup, the control electronics A-LAS-CON1 and an analog laser photoelectric sensor of the type A-LAS-F12-1x0.2-50/50 are used.



  Tutorial color detection of moving self-luminous objects



Colour and speed detection of "moving self-luminous objects" In this application both the colour and the speed of moving and luminous LEDs (moving self-luminous objects) should be detected.



  Tutorial SPECTRO-3 color sensor - PARA mode
            (works with two parameter sets)



Patterns of the interior field (automotive) should be divided in two groups (dark and bright) and should be distinguished with different sets of parameters.



  Tutorial SPECTRO-3 color sensor for interior areas



In the interior areas (automotive sector) various textiles or imitation leather should be detected whose surfaces differ in color and structur (gloss). For this task situation a color gloss detection sensor type SPECTRO-3-50-FCL is used, the handling of this sensor is being demonstrated here: Selection of the sensor, connection setup, parameter setting, teach process, verification of the taught colors, color recognition, evaluation.



  Color-gloss and structure sensors of COAST Series



Color, gloss and structure detection with the COAST hybrid-sensor.



NEWS

Our sales partner ICS A/S exhibits:

AUTOMATIK
Expo & Conferences
13-15 September 2022
Brøndby Hallen (Denmark)

more...


Specialist article in
Kunststoffe International
:

The Color Loop
Ensuring Color Consistency of Recycled Materials

(SPECTRO-3-0°/45°-MSM-LAB-ANA-P)

more...


New applications:


Differentiation of leather and plastic interior components
(N° 798)
Presence control of a potting compound on plastic components
(N° 799)
Detection of deformations on stamping stripes
(N° 800)

more...


WHAT IS ...
... surface tension?
... oil evaporation?
... oil layer thickness
    measurement?

more...


New videos:

"Danke für die Optoelektronik"
(Thanks for the optoelectronics)
"Bewirb Dich jetzt!"
(Apply now!)

more...


Software news:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

more...




FIND US ON ....

Facebook Twitter Instagram Youtube in

 








TOP