Praktische Beispiele aus dem industriellen Einsatz
R-S-A2.0-(2.5)-...
1) Sprache auswählen:
|
Color measurement of semitransparent plastic parts The color of semitransparent plastic components should be measured. |
|
||
|
Color measurement of plastic parts The color of plastic parts should be measured. |
|
||
|
Differentiation of matt and shiny metal parts Matt metal components should be differentiated from shiny metal parts. |
|
||
|
Punched hole detection at transparent plastic film Punched holes should be detected at transparent plastic films. |
|
||
|
区分塑料小刷的颜色 应区分塑料小刷的颜色。 Color differentiation of small plastic brushes Small plastic brushes should be color differentiated. |
|
||
|
检查主轴的塑料杆上是否有纱线 应检查一根主轴的塑料杆上是否有纱线。 Yarn presence control on plastic spindle The presence of a yarn on a plastic spindle should be controlled. |
|
||
|
区分气压弹簧类型 应分离两种不同的气压弹簧类型。在检查期间，气压弹簧可能会旋转。 Differentiation of pneumatic cylinders Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis. |
|
||
|
检查齿轮上是否有内螺纹或孔 应监测齿轮上是否有内螺纹和孔。此外还应检查，该孔是否比如被一个断裂了的钻头的尖部卡住了。 Presence control of an inside thread and a hole at a gear wheel The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit. |
|
||
|
分辨半透明塑料薄膜 应能在视觉上分辨半透明的塑料薄膜。 Differentiation of semitransparent plastic films Semitransparent plastic films should be differentiated. |
|
||
|
检查一个铜触点上是否有一个小金属片 应在一个铜触点上检测是否存在一个小金属片。 Presence control of small metal plates on a copper contact The presence of a small and thin metal plate should be detected. |
|
||
|
识别塑料膜中的凹坑 应在一个半透明的薄膜中精确识别凹坑。在此只能从上面进行检查。 Detection of a deepening in a plastic film Depressions in a semitransparent plastic film should be detected. The detection is only possible from above. |
|
||
|
手柄的色检 应区分内饰领域用手柄的颜色。 Color control of handles Handles in the automotive field should be color controlled. |
|
||
|
检查塑料螺旋盖中是否存在橡胶塞 应监测塑料件中是否有橡胶密封件。 Presence control of a seal in plastic components The presence of a seal in a plastic part should be controlled. |
|
||
|
在内螺纹中检查是否存在保护漆 应在内螺纹中监测是否存在螺钉保护漆。 Screw locking varnish presence control on female threads The presence of a thread lock fluid should be controlled on inside threads. |
|
||
|
区分 O型圈的色差 应通过颜色来区分O 型圈。在此应注意，O 型圈的表面会发出强光。 Color differentiation of O-rings O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy. |
|
||
|
探测金属部件上的黑色和灰色漆层 在喷淋室的防爆区域内，应区分未喷漆部件与喷黑漆或灰漆的部件。 Detection of black and gray lacquer coat on metal part In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts. |
|
||
|
检查铝铸件中是否有内螺纹 应检查铝铸件中是否有内螺纹；此外，应区分一个内螺纹和一个孔。 Presence control of a blind thread in aluminum casting An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole. |
|
||
|
识别黑色橡胶密封件上的荧光涂层 应检查一个橡胶密封件上是否存在涂层。此处使用的是可通过紫外线 (365nm … 385nm) 激发的荧光涂层，它随后发出其波长在蓝色范围内的光。 Detection of a fluorescent coating on black rubber seal The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range. |
|
||
|
检测发亮的红色标签 应检查黑色塑料壳体上是否存在发亮的红色标签。 Detection of a red shiny plastic label The presence of a shiny red plastic label on a black plastic component should be detected. |
|
||
|
识别铝制表面上的凹痕 应检测铝制表面上的凹痕。 Detection of punch marks in aluminum surface Punch marks in aluminum surface should be detected. |
|
||
|
区分内饰领域用的三个塑料件的颜色 应区分应用于内饰领域的灰色、黑色和棕色塑料件。此时应注意，控制系统可用的空间非常小，因此应利用光导体系统进行作业。 Color differentiation of plastic interior parts Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor. |
|
||
|
阳极电镀铝制品上的涂底剂检测 检测黑色阳极电镀制品上是否有涂底剂。 Presence control of a primer on black anodized aluminum The presence of a primer coating on black anodized aluminum should be controlled. |
|
||
|
塑料制品颜色检测 用于检测图示塑料过滤器的颜色，测量同一种颜色产品的色差。 Color quality control of plastic strainer The quality of green as well of red plastic strainer should be controlled. |
|
||
|
电子元件中是否涂有油脂检测 用于检测图示电子元件中是否涂油脂，未涂为不合格产品。 Presence control of grease in an electrical component The presence of grease on a metal part inside an electrical component should be checked. |
|
||
|
铰链组件表面检测 用于检测铰链组件的表面光滑度及颜色。 Surface control of frame joints The surface of several hinge-joints should be color-gloss controlled on different areas. |
|
||
|
玻璃盘光面和雾面的区分 用于区分玻璃盘的抛光面和雾面。 Differentiation of the polished surface from the grinded surface of a glass plate During the handling of glass plates the position of the polished surface must be controlled. |
|
||
|
铝箔印刷标记检测 SI传感器在此应用中用于检测铝箔上的一个激光参考标记。铝箔的行进速度约为60m/分钟。 Detection of a printed reference mark on an aluminum foil A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min. |
|
||
|
检测塑料按钮的颜色 该应用中，需使用传感器检测塑料按钮的颜色。检测过程中，塑料按钮排列在一条直线上，但上下位置不固定。传感器需在此情况下进行检测。 Color control of plastic buttons in the automotive interior field Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process. |
|
||
|
盲孔和盲线的区分 在此应用中，一个铝块上有若干盲孔（不通孔）及盲线需要被区分，而SI传感器可准确将他们识别出来。 Differentiation of blind holes and blind threads On metal blocs a presence control of blind threads and blind holes should be realized. |
|
||
|
织布表面2种颜色的检测 图示的汽车座椅织布表面有2种颜色，这2种颜色必须被检测。 Differentiation of two colors on a fabric On a fabric for car seats the two colors must be differentiated. |
|
||
|
检测铝制卷轴的转动方向 如图所示，该应用中，一个表面印有绿，蓝，红色标记的铝制转轴会转动，在此过程中，其转动方向和转动频率需被检测。 Detection of the direction of rotation of an aluminum coil The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively. |
|
||
|
绕线颜色的检测 在此应用中，带颜色的线被绕在一个铝制卷轴上。由于安装的限制，传感器必须通过卷轴上的孔来对内部的绕线的线色进行检测。 Detection of a thread on an aluminum coil A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil. |
|
||
|
高光及哑光镀铬材料的区分检测 在此应用中，两种配件外形完全一样，一种是高光表面，一种是哑光表面。检测面高度只有8mm，德国SI传感器可以准确区分这两种表面。 Differentiation of chrome plated shiny and chrome plated matt components Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end. |
|
||
|
印刷纸质扎带色标检测 在一条长的色带纹中，一小块白色的色标必须被检测出来。这个色带纹有可能是黄色，棕色，红色，蓝色，绿色，紫色，灰色等等。色带传送速度非常快，达到10m/s，白色色标的尺寸只有6mm x 4mm。在这种情况下，要求传感器精确的把色标位置检测出来。 Color mark detection on a paper banderole A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark. |
|
||
|
安全气囊织物上的白色胶带检测 从粉色织物，红色丝线及蓝白织物的背景上，检测出白色胶带。 Detection of a white tape on a pink airbag textile The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand. |
|
||
|
黑色齿轮及未镀层齿轮的颜色识别 该应用中，传感器用于识别该齿轮是黑色镀层齿轮还是金属未镀层齿轮，检测距离160mm，光斑直径3mm。 Color differentiation between a black and an uncoated metal gear wheel A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter. |
|
||
|
橡胶密封圈上的色标检测 该应用中，橡胶密封圈上有黄色的色标需要被检测出来。 Color mark detection on a rubber seal A yellow striped color mark should be detected on a rubber seal. |
|
||
|
滚珠轴承区分 同样尺寸的滚珠轴承，由于密封圈颜色不同，也需要被区分开来。此应用中，一样尺寸的轴承，一种密封圈是金色的，一种是银色的，这两种轴承必须在距离轴承160mm处被检测出来。 Differentiation of ball bearings Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm. |
|
||
|
碳纤维增强塑料薄膜的粉末涂层检测 该应用中，德国SI传感器用于检测碳纤维增强塑料薄膜粉末涂层的厚度。 Detection of powder coating on carbon fiber reinforced plastic films During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled. |
|
||
|
印刷业全息参考标记快速检测 全息标记的特点之一就是在特定的角度下，产生平行反射光束。对于大部分全息标记，这个角度是45°，并且反射回来的平行光束垂直于被测物的传输方向。不论是透明材质还是金属材质的全息标记，都可以精准的被SI传感器检测出来。 Super fast detection of holographic reference marks in the printing industry One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils. |
|
||
|
LED颜色检测 在该应用中，传感器用于检测电动牙刷上LED灯的颜色以及ON/OFF次数。 LED color control On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too. |
|
||
|
铝管上的色标检测 该应用中，传感器需检测直线运动中的铝管一端喷涂的红色标记，同时，还需检测铝管另一端是否有黑色字母标记。 Color mark detection on aluminum tubes A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too. |
|
||
|
分辨安全带扣的颜色 在该应用中，传感器需分辨同种颜色不同色调的米色、灰色及黑色安全带扣的颜色。 Color differentiation of seat-belt buckles For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present. |
|
||
|
汽车内饰中控制元件的颜色分辨 将控制元件组装至仪表盘、车门及车顶的过程中需要对其颜色进行检测。大多数控制元件的外壳和车身使用的是同样的亮漆，这意味着传感器需要在非常光滑的表面进行颜色检测。 Color differentiation of control elements in the automotive interior field During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors. |
|
||
|
汽车塑料部件的颜色分辨 汽车内饰中有许多塑料部件，用于车门、座椅、后门、车顶及仪表盘等，主要呈灰色、米色或黑色。SI传感器可用于以上部件的颜色检测。 Color differentiation of plastic components in the automotive industry In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black. |
|
||
|
汽车内饰塑料部件的颜色分辨 传感器需要对汽车内饰中塑料部件的颜色进行区分。 Color differentiation of plastic parts in the automotive interior field Different colored plastic components which are used in the automotive interior field should be distinguished. |
|
||
|
检测有色液体 在水循环过程中需要对水的颜色进行检测。水有可能呈现蓝色（污染）或米色（含油），颜色传感器需检测到这两种情况，保证水质清澈。 Colored liquid control During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean. |
|
||
|
金属管道上墨水标记的质量控制 金属管道上使用喷墨打印机做了黑色标记。有时印记没有处在正确的位置上，或覆盖宽度不够，需使用传感器进行检测。 Black ink mark control on metal tubes On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient. |
|
||
|
层压材料带的正/反面检测 该应用中，需使用传感器检测层压材料带的正反面。层压材料带颜色可为白、黑或红。 Detection of the correct direction of a laminated band (front side/back side detection) The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red. |
|
||
|
搭扣带 ( Velcro® ) 正反面检测 搭扣带正反面检测，区分绒面和钩面。 Hook-and-pile fastener (Velcro®) direction control The task is to check the direction of the hook-and-pile fastener. |
|
TOP