Praktische Beispiele aus dem industriellen Einsatz
R-S-R2.1-(6x1)-...
1) Sprache auswählen:
|
Detection of a glue line on paper or fabric The presence of a glue line on paper or fabric should be detected. |
|
||
|
Color differentiation of threads Different colored threads, used for sewing leather together, should be controlled on sewing machines. |
|
||
|
Control of the contact surface of gear wheels The contact surface of gear wheels should be controlled. |
|
||
|
Color mark control on syringes The color of the mark on syringes should be controlled. |
|
||
|
Coating control at the front side of film capacitors The double coating at the front side of film capacitors should be controlled. |
|
||
|
Casting compound control at capacitor housings The casting compound of capacitor housings should be controlled. |
|
||
|
Color differentiation of flaps in cup holders Black flaps should be color differentiated from dark brown flaps. During the tests the flaps are already integrated into the cup holder. |
|
||
|
Presence control of a laser engraving on a glass bottle The presence as well as the intensity of a laser engraving on glass bottles should be controlled. |
|
||
|
Wall thickness control of semitransparent plastic components The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts. |
|
||
|
Color differentiation of half shells of bush bearings Half shells of friction-type bearings should be color differentiated. |
|
||
|
Color control of metal rings The quality of metal rings should be controlled with a view to the color. |
|
||
|
Winding control of yarn on a pirn During the winding of yarn, the correct winding should be controlled. |
|
||
|
Color differentiation of plastic pen housings The color of plastic bushings should be controlled. |
|
||
|
Color control of a red stripe on a fabric The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range. |
|
||
|
Cut off point detection on a fleece tape The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference. |
|
||
|
Spray jet control with reflected light The spray jet should be controlled with reflected infrared light and in an Ɛx zone environment. |
|
||
|
Gray value control of screen printing plastic plates The gray scale value of screen printing plastic plates should be controlled. |
|
||
|
Control of silk-screen printing color marks Screen printing color marks should be controlled on plastic sheets. |
|
||
|
Color and guidance control of capsules The color as well as the orientation of capsules should be controlled during the production and just before packaging. |
|
||
|
Presence control of a seal ring on a plastic component The presence of a silicon ring on a plastic component should be controlled. |
|
||
|
Detection of plastic residues on the start of metal thread Plastic residues on the start of metal threads should be detected. |
|
||
|
Presence control of an inside thread and a hole at a gear wheel The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit. |
|
||
|
Detection of the edge of a stripped ribbon cable The beginning of the laser stripped part of a ribbon cable should be precisely detected. |
|
||
|
Color control of injection moldings Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge. |
|
||
|
Color mark detection on plastic film A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur. |
|
||
|
Differentiation of grinded and raw metal pins Grinded and raw metal pins should be differentiated. |
|
||
|
Differentiation of metal rods Metal rods with an even finish should be differentiated from metal rods with a slotted end. Furthermore a metal rod with a black slotted end should be differentiated from a steel colored end. |
|
||
|
Tarnish film detection on metal band A tarnish film should be detected on metal band. |
|
||
|
Detection of a yellow stripe on metal clamps The presence of a yellow striped on metal clamps should be detected. |
|
||
|
Adhesive film presence detection on plastic screws The presence of an adhesive film should be controlled on the thread of plastic screws. |
|
||
|
Detection of different color marks on different plastic tubes Different color marks should be detected on different plastic tubes. |
|
||
|
Detection of a gap on adhesive plaster The presence of a gap of the tape on an adhesive plaster should be detected. |
|
||
|
Detection of machining marks on bimetallic strips of slide bearings Chatter marks on slide bearing stripes should be detected immediately before the grinding process. |
|
||
|
Detection of an adhesive tape on plastic flooring An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color. |
|
||
|
Counting of dishes for water cooling systems The number of dishes in a package should be counted during the movement of the package. |
|
||
|
Color mark detection on plastic film labels A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part. |
|
||
|
Detection of a line engraving on the bearing surface of a pulley An engraved line on the bearing surface of a black pulley should be detected. |
|
||
|
Detection of uninsulated cables in a twisted cable assembly Uninsulated cables should be detected in a twisted cable assembly. |
|
||
|
Detection of color marks on slide bearing shells Red, green and yellow color marks as well as no color mark on slide bearing shells should be detected and distinguished. It should be taken into account that the color mark should be detected even if it is partially removed. |
|
||
|
Color differentiation of three different plastic components in the interior field Three different colored plastic parts should be differentiated. |
|
||
|
Sleeve presence control on an injection needle The presence of a sleeve on an injection needle should be controlled. |
|
||
|
Lattice texture presence control on a fleece stripe The presence of a lattice texture on a fleece stripe should be controlled. |
|
||
|
Presence control of a paper sheet on an aluminum plate The presence of a paper sheet on different colored aluminum plates should be controlled. |
|
||
|
Gloss control of cutting rings The gloss of cutting rings should be controlled. Two components, different in gloss, should be distinguished. |
|
||
|
Color differentiation of brown plastic door seals Two different brown colored plastic seals should be differentiated. |
|
||
|
Color differentiation of plastic stripes Different colored plastic stripes should be differentiated. |
|
||
|
Detection of the alignment of a screw The alignment of screws in a mechanical guide should be controlled. |
|
||
|
Control of the orientation of leather imitation The orientation of different colored leather imitations should be controlled. |
|
TOP